We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
Inv. Num. : 5837 Type: LYNX 220 LSYC Producer: DOOSAN Created: 2018 Parameters: Control system: DOOSAN FANUC-i Duty cycle: 8205 h Maximum turning length: 510 mm Max. turning diameter: 300 mm Maximum turning diameter over bed: 600 mm Maximum turning diameter over support: 400 mm Controlled axes: X/Z/Y/C1/C2/B Maximum travel length in the X-axis: 205 mm Maximum feed rate in the Z-axis: 560 mm Axis Y: 105 mm C1/C2 axis: 360 Maximum main spindle power: 15 kW Spindle clearance: 76 mm Minimum main spindle speed: 45 1/min Maximum spindle speed: 4500 1/min Maximum workpiece weight: 300 kg Maximum travel length in the B-axis: 560 mm Max. passage of bar material ...
Machine weight: 4200 kg Circulating diameter above the bed: 600 mm Revolving diameter above support: 400 mm Spindle speed - range: 45-4500 Max. workpiece weight: 120/300 kg Max. turning diameter: : 300 mm Max. turning length in chuck:: 510 mm Max. diameter of turned bar:: main spindle/counter spindle: 65/34
CNC Fanuc Oi-TC Rotating diameter on the bench 510 mm Rotating diameter on the carriage 290 mm Maximum turning diameter 250 mm Maximum turning length 510 mm Turning diameter from bar 51 mm X axis travel 175 mm (160 + 15) Z axis travel 550 mm Spindle speed Rpm 6000 Spindle motor Kw 12 ASA A2#5 spindle connection
Bar stock capacity...2.56" Max swing (inches)...20.08" Spindle motor (hp)...20 HP Chuck size (inches)...8" Maximum turning length..20.7" Tailstock quill stroke..3.14" Maximum turning diameter12.6" X - axis travel (inches).6.89" Z - axis travel (inches).21.65" Rapid traverse rates x, z...1181 PM / 1417 IPM Maximum swing over carriage..11.42" Spindle nose / spindle bore...A2-6" / 2.99"
Inv. Num. : 6699 Type: LYNX 220 LSA Produzent: DOOSAN Erzeugt: 2012 Parametern: Steuerungssystem: FANUC iSeries Maximal-Drehlänge: 510 mm Max. Drehdurchmesser: 300 mm Maximaler Drehdurchmesser über Bett: 600 mm Maximaler Drehdurchmesser über Support: 400 mm Maximale Spindeldrehzahl: 6000 1/min Max. Stangendurchmesser: 51 mm Länge: 2763 mm Breite: 1627 mm Höhe: 1655 mm Gewicht: 3400 kg Ausstattung: Gegenspindel Stangenlader Hydrobar
The machine is in good technical condition, it is possible to test it by agreement. Control system: DOOSAN FANUC-i Total hours: 8205 hours Maximum turning length: 510 mm Max. turning diameter: 300 mm Turning diameter above the bed (max): 600 mm Turning diameter over the transverse slide (max): 400 mm Controlled axes: X/Z/Y/C1/C2/B Maximum travel length in the X axis: 205 mm Maximum feed rate in Z axis: 560 mm Y axis: 105 mm C1/C2 axis: 360 Maximum power of main spindle: 15 kW Spindle drilling diameter: 76 mm Minimum speed of main spindle: 45 1/min Maximum speed of spindle: 4500 1/min Weight workpiece: 300 kg Maximum travel length in B axis: 560 mm Max. bar material passage: 65 mm Length: 288 ...
Running diameter above the bearing max. 600mm Circular diameter above the caliper max. 400mm Max. turning diameter: 300mm Max. turning length in chuck: 510mm Max. diameter of turned bar (on main spindle): 65mm Max. diameter of turned bar (on counter-spindle): 34mm X-axis stroke: 205mm Stroke in Z axis: 560mm Y-axis stroke: 105 (±52.5)mm B-axis travel: 560mm Number of tool head positions: 14 Number of driven positions in the tool head: 12 Doosan FANUC-i control system The machine comes with a 1m bar feeder and a chip ejector. Weight approx. 4000kg On prior arrangement, possibility of inspection in operation. The machine is in good technical condition. Circulating diameter ab ...
2018 DOOSAN LYNX 220 LSYC CNC latheType: LYNX 220 LSYCManufacturer: DOOSANYear: 2018Control: DOOSAN FANUC-iTotal number of hours: 880 hoursMaximum turning length: 510 mmMax. turning diameter: 300 mmTurning diameter above the bed (max): 600 mmDiameter of rotation over the transverse slide (max): 400 mmControlled axes: X/Z/Y/C1/C2/BMaximum travel length in the X axis: 205 mmMaximum feed speed in the Z axis: 560 mmY axis: 105 mmC1/C2 axis: 360Maximum power of the main spindle: 15 kWSpindle bore diameter: 76 mmMinimum revolutions of the main spindle: 45 1/minMaximum spindle speed: 4500 1/minWorkpiece weight: 300 kgMaximum travel length in the B axis: 560 mmMax. rod material passage: 65 mmLength ...
Machine Details Warehouse number 1105-03706 Machine type CNC lathe Make DOOSAN DAEWOO Type LYNX 210 Year of construction 2004 Control type CNC Control Fanuc 21-T Storage location FRANCE Country of origin KORREA Delivery time immediately Freight base from location Technical details Turning diameter 460 mm Turning length 300 mm Control Fanuc 21-T Turning diameter over bed 460 mm Turning diameter above the face carriage 280 mm Travel - x 160 mm Travel - z 330 mm Center width 335 mm Rapid traverse X-axis 12 m/min Rapid traverse Z-axis 15 m/min Speed range - main spindle 42 - 4,000 rpm Spindle nose A2-6 Spindle passage 51 mm Spindle bore 65 mm Spindle cone 1/20 Drive ...
achine-Details Stock-No. 1105-03887 Type of machine CNC Lathe Make DOOSAN DAEWOO Type LYNX 200 LC Year of manufacture 1998 Type of control CNC Storage location HAGUENAU FRANCE Country of origin KORREA Delivery time immediately Freight basis ex site Price Technical details turning diameter 460 mm turning length 300 mm control Fanuc 21-T turning diameter over bed 460 mm turning dia. Over Face-Slide 280 mm Travel -x axis 160 mm Travel -Z AXIS 330 mm centre distance 335 mm rapid traverse X-axis 12 m/min rapid traverse Z-axis 15 m/min turning speed range - main spindle 42 - 4,000 rpm spindle nose A2-6 Spindle Passage 51 mm Spindle Bore 65 mm spindle cone 1/20 power ...