| NC swivel rotary table integrated
in rigid table |
Type of Measuring system Direct measuring
system |
|
Table surface 800 x 650 (Ø 650) mm |
|
Rotation Speed 5. Axis 20 rpm |
|
5. Axes (swivelling range) +120/-120 x 0,001
degree |
|
4. Axes (swivelling range) 360 x 0,001 degree |
|
Rotation speed max.4. Axis 40 rpm |
|
Distance between T-Slots 63 mm |
|
Number of Slots 9 |
|
Slot width 14 mm |
|
Maximum load (table centre) 600 Kg |
|
Centre bore 50 mm |
| Direct measuring system |
Direct path measuring system |
| Cabine |
Full protection cabin |
| Motor spindle 20,000 rpm |
Motor spindle speedMASTER® SK 40 Spindle speed 20
- 20,000 min-1 Output 35 kW / 25 kW (47 hp / 33 hp) Torque 130 Nm / 86
Nm (96 ft lbs / 63 ft lbs) (40 / 100 % duty cycle) |
| Tool magazine, chain vert., 60
pockets |
Tool magazine Vertical chain magazine basic with
60 magazine pockets SK 40 or optionally chosen spindle taper |
| Spindle taper HSK-A 63 |
Spindle taper for HSK-A 63 to DIN 69893 (incl.
adaptation working spindle and standard magazine) |
| 3D quickSET |
3D quickSET Tool kit for control and compensation
of the cinematic accuracy of 5 axis machine configurations (only
together with option measuring probe) |
| Infrared measuring probe
Renishaw |
Infrared measuring probe Type Renishaw OMP 60 SK
40 or optionally chosen spindle taper |
| Production package 40 bar/23 l/min, 600 l
tank |
Production package: Scraper flight conveyor with
coolant unit 600 l / 160 gallon, paper band filter Discharge height:
950 mm / 37.4 in Width: 670 mm / 26.4 in Internal coolant supply 40
bar/23 l/min / 580 psi/6 gallon/min through spindle centre (AD)
Exter |
| Tool identification (TDS) - BIS M |
Tool identification (Tool Dialogue System TDS)
Type Balluff, data carrier BIS M-122-02/A Reading writing station at
the tool magazine Reading/Writing manually, contactless with chip |
| ATC (Application Tuning Cycle) |
ATC (Application Tuning Cycle) programmable feed
parameter selection for machining task: accuracy/ surface/ speed |
| Safety package for power failure |
Safety package for power failure: Voltage control
with fast deceleration trigger Controlled shut down of the control
Display of last executed program number |
| 3D data model |
3D data model in STEP format for integration in a
CAD system by the customer. It is used for machine simulation. (Data
basis in component structure) |
| Digital Manufacturing Package |
Digital Manufacturing Package (1) IoTconnector
Allows the use of the Online services from DMG MORI (2) Machine Data
Connector (MDC) Standardized machine data interface Protocols: OPCUA,
MTConnect, MQTT (3) NETservice Qualified support through
internet-b |
| Service Agent |
Service Agent Overview of all maintenance work on
the machine |
| Special equipment |
Provision of an RMS sensor |