| NC swivel rotary table integrated
in rigid table |
Type of Measuring system Direct measuring
system |
|
Table surface 800 x 650 (Ø 650) mm |
|
Rotation Speed 5. Axis 20 rpm |
|
5. Axes (swivelling range) +120/-120 x 0,001
degree |
|
4. Axes (swivelling range) 360 x 0,001 degree |
|
Rotation speed max.4. Axis 40 rpm |
|
Distance between T-Slots 63 mm |
|
Number of Slots 9 |
|
Slot width 14 mm |
|
Maximum load (table centre) 600 Kg |
|
Centre bore 50 mm |
| Integrated motor spindle
speedMASTER® |
Drive power (100% DC) 25 kW |
|
Speed range - 15000 rpm |
|
Torque (40% DC) 130 Nm |
|
Torque (100% DC) 86 Nm |
|
Drive power (40% DC) 35 kW |
|
Spindle taper HSK-A 63 |
|
Clamping System HSK-A 63 |
| Direct measuring system |
Direct path measuring system |
| Cabine |
Full protection cabin |
| Tool magazine, chain vert., 90
pockets |
Tool magazine Vertical chain magazine basic with
90 tool pockets |
| Spindle taper HSK-A 63 |
Spindle taper for HSK-A 63 to DIN 69893 (incl.
adaptation working spindle and standard magazine) |
| 3D quickSET extension package |
3D quickSET extension package for each further
machine: software / password (only together with option measuring
probe and existing set of measuring tools) |
| Infrared measuring probe Heidenhain |
Infrared measuring probe Type Heidenhain TS 460 SK
40 or optionally chosen spindle taper |
| Tool measuring in machining area Blum
Laser |
Tool measuring in machining area Blum Laser
DIGILOG Tool length and diameter measurement vertically |
| Production package 40 bar/23 l/min, 600 l
tank |
Production package: Scraper flight conveyor with
coolant unit 600 l / 160 gallon, paper band filter Discharge height:
950 mm / 37.4 in Width: 670 mm / 26.4 in Internal coolant supply 40
bar/23 l/min / 580 psi/6 gallon/min through spindle centre (AD)
Exter |
| Rotating clear-view window |
Rotating clear-view window cabin door |
| TCC Tool Control Center basic
HSK-A63 |
TCC Tool Control Center basic HSK-A63 - Detection
of soiling at the tool interface - Spindle protection by monitoring
the max. forces - Determination of the tool pull-in force |
| TCC Tool Control Center advanced |
TCC Tool Control Center advanced - Extension of
the functional scope of the option TCC basic - Tool- and workpiece
protection - Visualization of the cutting symmetry - Machine
Protection Control MPC |
| proTIME |
proTIME Visualisation of the remaining runtime,
remaining workpieces and the machine state |
| EROWA Automation Interface PH 150 / PH
CELL |
Automation interface PH 150 / PH CELL for EROWA
zero-point clamping system consisting of: - Interface (Profibus) via
M65 - Working table with 4-channel rotary transmission - Automatic
lifting door - Control of EROWA (MTS / UPC) Zero-point clamping
s |
| Price reduction for automation from DMG
MORI |
Price reduction on automation interface with
simultaneous order of a DMG MORI Automation solution |
| Cooling |
Cooling by air blast through spindle centre,
selection with M function |
| Interface for Oil and emulsion mist
separator |
Interface mechanical and elektrical for oil- and
emulsion mist separator |
| Tropical package (ambient temp. max. 50
°C) |
Package for tropical climate for ambient
temperature of max. 50° Celsius at machine location |
| Control cabinet lighting with power
outlet |
Control cabinet lighting with power outlet
Lighting in the control cabinet with motion sensor power outlet 230V -
10A (Type F - Schuko) Other types of outlet on request Connected
before the main switch (for this the customer must provide a loadable
neutra |
| Operation mode 4 |
Operation mode 4 Process monitoring in the
production Manual intervention with open doors of machining area
Release after completed check list |
| Safety package for power failure |
Safety package for power failure: Voltage control
with fast deceleration trigger Controlled shut down of the control
Display of last executed program number |
| Machine documentation on CD-ROM |
Machine documentation on CD-ROM operating
instructions, programming instructions |
| IoTconnector |
IoTconnector The IoTconnector allows the use of
online services of DMG MORI (e.g. NETservice) |
| Machine Data Connector |
Machine Data Connector (MDC) Uniform machine data
interface. |
| NETservice |
NETservice Qualified support by Internet-based
remote diagnostics |
| Messenger V4 |
Messenger V4 Clear presentation of the machine
live status. |
| Service Agent |
Service Agent Overview of all maintenance work on
the machine |
| PH CELL |
PH Cell pallet loading and unloading system with
handling system and pallet rack system - Handling system with pallet
gripping system, Transfer weight max. 300 kg (pallet with load)
- 1 shelf module with 3 shelve floors and up to 15 storage poc |
| Pallet Management - Control Comfort
Plus |
Control Comfort Plus includes additional to the
basic version different options more, to ensure a better utilization
and flexibility of the automation cell. - Zero point displacement of
the pallets - Selection of multiple different NC-programs for one
p |
| 1 Additional set of documents in paper
form |
1 additional set of documents: operating and
programming instructions in paper form |
| Set-up station rotable |
Set-up station rotatable manual 4 x 90° |
| Signal lamp with 4 colours |
Signal lamp with 4 colours red: general error
yellow: intervention required green: machine in automatic operation
blue: machine in set-up operation |
| EROWA MTS zero point clamping
station |
EROWA MTS zero point clamping station with
clamping modules for pallet size 400 x 400 and 500 x 500 mm |
| 2 x Aluminum pallet 400 x 400, smooth,
EROWA MTS |
2 x Aluminum pallet 400 x 400 mm incl. clamping
pins compatible for clamping station EROWA MTS Smooth surface incl.
EROWA- pallet coupling for gripping by pallet handling device |
| 2 x Aluminum pallet 400 x 400, bore
pattern, EROWA MTS |
2 x Aluminum pallet 400 x 400 mm incl. clamping
pins compatible for clamping station EROWA MTS Bore pattern M12, Grid
50 mm incl. EROWA- pallet coupling for gripping by pallet handling
device |
| CE - Conformity |
CE conformity for the complete system (automation
with machine tool) |