| Direct measuring system |
Direct path measuring system |
| Spindle speed 20.000 rpm |
Motor spindle speedMASTER® HSK-A63 Spindle speed
20 - 20,000 min-1 Output 35 kW / 25 kW (47 hp / 33 hp) Torque 130 Nm /
86 Nm (96 ft lbs / 63 ft lbs) (40 / 100 % duty cycle) |
| NC swivel rotary table |
Swivel Rotary Table for simultaneous machining
Clamping surface dia. 630 x 500mm / 24.8 x 19.6 in swivel range -35 to
+110°, rotary axis 360° including direct measuring system for B- and
C-axis and working plane transformation |
| Reduced table plate swivel rotary
table |
Reduced table plate for swivel rotary table
Clamping surface D 505x500 mm / 19.8x19.6 in |
| Clamping pneumatic, one circuit |
Clamping pneumatics,1 clamping circuit for
standard machine |
| Tool magazin 120 pockets HSK-A63 |
Tool magazine 120 places HSK-A63 Vertical chain
with double gripper incl. set up station for tool loading |
| Swarf conveyor, with cleaned slot
screen |
Swarf conveyor, scraper type with cleaned slot
screen |
| Coolant tempering for internal coolant
980l |
Coolant tempering for internal coolant unit 980l /
259 gallon: Heating capacity max.: 4 kW / 5.3 hp Cooling capacity
max.: 4 kW / 5.3 hp (only in combination with internal coolant unit
980l) |
| Coolant-air blast change-over |
Coolant - Air-blast changeover external switchable
via M-Function |
| Air blast through spindle centre |
Air blast through spindle centre activated by M
function, maintained air with low oil rate |
| Chip flushing for working area |
Chip flushing for working area rinsing line on the
right side panel, backside of machine bed, cabin left and right
activated or deactivate by M function´s (only in combination with
internal coolant supply, not with 20 bar ICS) |
| Double cartridge filter, 25 µm |
Double cartridge filter, Finesse of filtration 25
µm, manually reversible (only in connection with separate paper-type
filter) |
| Rotating clear-view window |
Rotating clear-view window (only available with
option cabin roof) |
| Oil- and emulsion mist separator
mechanical |
Oil- and emulsion mist separator mechanical (only
available with option cabin roof) |
| Infrared measuring probe PP60
optical |
Infrared touch Probe make Renishaw PP 60 optical
(OMP 60) |
| Laser tool measuring |
Laser tool measuring, fix mounted at machine
column Tool lenght and diameter measuring automatically cleaning
through external airblast Calibration tool with taper |
| Preparation 3D Quickset |
Machine preparation for use of the 3D quickSET
Toolkit. included is the Softwareoption for 3D quickSET for one
machine. 5 axis machine configurations (only with option touch
probe) |
| MPC Machine Protection Control |
MPC Machine Protection Control Machine protection
by quick shutdown |
| Signal lamp 4-colour |
Signal lamp 4 colour Red: general error Yellow:
intervention necessary Green: automatic mode Blue: set-up mode |
| DMG MORI Interface PROFIBUS |
DMG MORI Interface PROFIBUS loading door at right
machine side PROFIBUS communication between robot and machine for
loading cycle 2 channel safety circuits Only in combination with an
additional clamping method option!. |
| Package for tropical climate for
speedMASTER® |
Package for tropical climate for speedMASTER®
for ambient temperature max. 50°Celsius: includes active cooling for
electrical cabinet, active cooling main spindle drive / motor
spindle |
| DMG MORI NETSERVICE |
DMG MORI NETSERVICE Qualified support by
Internet-based remote diagnostics |
| IoT connector |
DMG MORI IoTconnector The IoTconnector allows the
use of online services of DMG MORI (e.g. NETSERVICE or MESSENGER on
ADAMOS) |
| SERVICE AGENT (CELOS) |
SERVICE AGENT (CELOS) Overview of all maintenance
work on the machine |
| MESSENGER (CELOS) |
MESENGER (CELOS) Clear live status of the
networked machines |
| WH25 Workpiece loading and unloading
system with 6-axis industrial robot and workpiece carrier drawers |
WH25 Workpiece loading and unloading system with
6-axis industrial robot and workpiece carrier drawers |