| Main drive |
Drive power (100% DC) 6 kW |
|
Drive power (40% DC) 8,5 kW |
|
Torque (100% DC) 41 Nm |
|
Torque (40% DC) 48 Nm |
|
Speed range 20 - 15000 rpm |
|
Spindle taper BT 30 |
|
Clamping System ISO 7388-3 - JD30 |
| Integrated swivel rotary table
simultaneous |
Integated swivel rotary table DMP 35 version
5-Axis simultaneous mode! Torque drives incl. direct measuring in A-
and C-Axis Swivel range A-Axis -120 / + 100 degrees Max. load C-axis
100kg Table diameter C-Axis d290mm Rotary joint, 4-channels Inclusive
So |
| Rotary joint, 6 channels |
Rotary lead through for integrated swivel rotary
table with torque drives 6- flute, 2x for air, 4x for oil Including
fix plate and fast coupling at machine side |
| Tool magazine 25 places |
Tool magazine 25 places (suitable for inclusion in
the tool spindle) Max. tool length 150 mm Chip-to-chip time 1.6 sec
Note: machine width increases to 1410 mm! |
| Production package band filter ICS
40bar |
Paper band filter ICS 40bar includes: Paper band
filter 40bar/ 23l/min Additional tank 600l Chip conveyor useable for
fine chips (self cleaning slotted filter) Discharge height: 600mm;
Tank volume 200l Flushing in working room Spray gun for swarf
removal |
| Air blast through spindle centre |
Air blast through spindle center via M-Command;
maintained air with small Oil portion Due to needed lead through in
main spindle only with swarf removal package ICS possible! |
| RENISHAW touch probe-Kit |
RENISHAW measuring suitable to tool taper System
in Spindle OMP40-2 touch probe with optical signal transmission OTS
wireless probe with air purge on machine table OMI-2T optical
transmission module Plastic carrying case Calibration tool incl. tool
holder |
| Preparation 3D Quickset |
Machine preparation for use of the 3D quickSET
Toolkit. included is the Softwareoption for 3D quickSET for one
machine. 5 axis machine configurations (only with option touch
probe) |
| proTIME |
proTIME Visualisation of remaining runtime,
remaining workpieces and the machine state |
| Signal lamp 4-colour |
Signal lamp, 4 colours |
| Automation Interface WH CELL right |
Automation interface right for WH CELL / WH FLEX
Interface (Profibus) via M65; Automatic loading door right; Working
table with 4-channel rotary joint; 4-chanel enegry supply to machine
table for (3-Axis-Machines); Only in combination with an additional
c |
| Price reduction for automation from DMG
MORI |
Price reduction on automation interface with
simultaneous order of a DMG MORI Automation solution |
| Operation mode 4 |
Operation mode 4 Process monitoring in the
production Manual intervention with open doors of machining area.
Release after check list has been filled in. |
| Digital Manufacturing Package |
Digital Manufacturing Package (1) IoTconnector
Allows the use of the Online services from DMG MORI (2) Machine Data
Connector (MDC) Standardized machine data interface Protocols: OPCUA,
MTConnect, MQTT (3) NETservice Qualified support through
internet-b |
| Messenger V4 |
The latest version of DMG MORI Messenger displays
web based the machine live status. It allows to analyze the machine
run-time, downtime, alarms in individually configurable dashboards
and transparently shows the actual status in the manufacturing
shop |
| Workpiece loading & unloading system WH 3
CELL |
Workpiece loading & unloading system WH 3 CELL
with 6-axis industrial robots and workpiece carrier storing system
(paternoster); maximum possible workpiece weight of 3 kg, maximum
workpiece size 100 x 100 x 50 mm Robot FANUC LR Mate 200 iD/7L
PROFIBUS D41152871 in |
| Pneumatic pallet pusher - robot side |
Pneumatic cylinder installed on the robot side for
slide over individual workpiece pallets within the paternoster
system. |
| Menu-driven input programming |
Menu-driven input programming Control extension in
addition to the Teach programming; Process definition by entering
parameters; Separate intuitive user interface; |
| Robot FANUC LR Mate 200 iD/14L |
Robot FANUC LR Mate 200 iD/14L for Load capacity
extension up to 14 kg transfer weight (deviating axis speeds to robot
FANUC LR Mate 200 iD/7L!) |
| WH 3 CELL Integration kit for DMP
35/70 |
WH 3 CELL Integration kit for DMP 35/70
Machine-specific adaptation for the protective housing on one DMP
35/70 |
| Dual gripper PGN 80 (without gripper
fingers) |
Dual gripper Type Schunk PGN 80 with 8 mm travel
per jaw (gripper fingers not included!) |
| Gripper quick-change system 2
gripper |
Gripper quick-change system for dual gripper |
| Workpiece carrier standard |
Workpiece carrier standard - plastic 15 Workpiece
carrier 600x400 (workpiece specified inlay´s not include) |
| SPC drawer |
SPC drawer (only to be removed) Output of a trial
workpiece for process control |
| Turning station (without gripper
fingers) |
Turning station includes 1 gripper, type depending
on the selection and rotary module 0° / 180° (gripper fingers not
included!) |
| Alignment station |
Alignment station for exact positioning of the
workpiece in the gripper. |
| Robot Teachset |
Robot Teachset for the new creation of workpieces
/ workpiece carriers as well as for the basic adjustment of the robot
and / or gripper. |
| Not OK discharge via slide |
Not OK discharge via slide Removal of bad parts
after machine signal |
| Special equipment |
1 set of gripper jaws for turning station Design
analogous to gripper jaw set PGN+80 2 sets of gripper fingers for
gripper unit Design analogous to gripper jaw set PGN+80, suitable for
gripper unit and quick-change gripper finger system 1 piece
workpiec |