| Direct measuring system |
Direct path measuring system |
| Cabine |
Full protection cabin |
| NC swivel rotary table with pallet
carrier |
Table surface 500 x 500 mm |
|
Centre bore 50 mm |
|
Maximum load (table centre) 500 Kg |
| Motor spindle 20,000 rpm |
Motor spindle speedMASTER® HSK-A 63 Spindle speed
20 - 20,000 min-1 Output 35 kW / 25 kW (47 hp / 33 hp) Torque 130 Nm /
86 Nm (96 ft lbs / 63 ft lbs) (40 / 100 % duty cycle) |
|
5. Axes (swivelling range) +/- 120 x 0,001
degree |
|
4. Axes (swivelling range) 360 x 0,001 degree |
|
Distance between T-Slots 100 mm |
|
Number of Slots 5 |
|
Slot width 14 mm |
| Tool magazine, chain vert., 180
pockets |
Tool magazine Vertical chain magazine with 180
tool pockets |
| Spindle taper HSK-A 63 |
Spindle taper for HSK-A 63 to DIN 69893 (incl.
adaptation working spindle and standard magazine) |
| 3D quickSET |
3D quickSET Tool kit for control and compensation
of the cinematic accuracy of 5 axis machine configurations (only
together with option measuring probe) |
| Infrared measuring probe Renishaw |
Infrared measuring probe Type Renishaw OMP 60 |
| Tool measuring in machining area Blum
Laser |
Tool measuring in machining area Blum Laser
DIGILOG Tool length and diameter measurement vertically |
| Production package 40 bar/23 l/min, 600 l
tank |
Production package: Scraper flight conveyor with
coolant unit 600 l / 160 gallon, paper band filter Discharge height:
950 mm / 37.4 in Width: 670 mm / 26.4 in Internal coolant supply 40
bar / 23 l/min - 580 psi / 6 gpm through spindle centre (AD)
External |
| Rotating clear-view window |
Rotating clear-view window cabin door |
| Sensorpaket i4.0 |
Sensor package i4.0: MPC Machine Protection
Control SGS Spindle Growth Sensor ICS flow sensor |
| proTIME |
proTIME Visualisation of the remaining runtime,
remaining workpieces and the machine state |
| Tool identification (TDS) |
Tool identification (Tool Dialogue System TDS)
Type Balluff, data carrier BIS C-122-04/L Reading writing station at
the tool magazine Reading/Writing manually, contactless with chip |
| Maintenance Package I4.0 |
Maintenance Package I4.0: - D41252871 measurement
of tool pull-in force - autom. lubrication of tool clamp - monitoring
of pneumatics |
| Spray pistol with pump |
Spray pistol with pump 2 bar/40 l/min 29 psi/10.4
gallon/min (theoretical pump performance) |
| Cooling |
Cooling by air blast through spindle centre,
selection with M function |
| Application Tuning Cycle ATC |
Application Tuning Cycle ATC programmable feed
parameter selection for machining task: accuracy/surface/speed |
| MDynamics package |
Deckel Maho package MDynamics Improved surface
quality combined with reduced machining time |
| Operation mode 4 |
Operation mode 4 Process monitoring in the
production Manual intervention with open doors of machining area
Release after completed check list |
| DMG MORI NETSERVICE |
DMG MORI NETSERVICE Qualified support by
Internet-based remote diagnostics |
| IoT connector |
DMG MORI IoTconnector The IoTconnector allows the
use of online services of DMG MORI (e.g. NETSERVICE or MESSENGER on
ADAMOS) |
| SERVICE AGENT (CELOS) |
SERVICE AGENT (CELOS) Overview of all maintenance
work on the machine |
| MESSENGER (CELOS) |
MESENGER (CELOS) Clear live status of the
networked machines |
| Special equipment |
- Painting of the enclosure cooling units in
machine colour - Tempered glass pane including cabin in FD design -
Rotating viewing window for work area, 1 pc Bonded version for
tempered glass panes - Narrow swivelling bridge with integrated
Capto C8 |
| Special equipment |
Wheel magazine for changing smaller workpieces
workpieces by means of shuttle unit and double gripper workpiece
changer into the work area. - Double wheel with 25 workpiece holders
each (quiver) - Shuttle unit - Double gripper for workpiece handling
- C |