| Excentric turning and milling
operation |
Excentric turning and milling operation
(only with Siemens control) |
| 5-axis simultaneus machining |
5-axis simultaneous machining |
| Interpolation turning |
Turning-recessing cycle Manufacture of simple
sealing Surfaces and grooves using turn/mill centers |
| Counter spindle centre |
Complete machining of shaft components without
process interruptions on turn/mill centers with counter spindle. Cycle
for automatic exchange of a center into the counter spindle and back
into the tool magazine. The centre is not included in the
delivery |
| Technologie cycle alternating speed |
Technology cycle for the application of an
alternating speed for vibration sensitive set-ups (Only in conjunction
with Siemens control) |
| Polygon Turning |
Polygon Turning for machining of elliptic and
polygonal shapes on end faces Note: Only in combination with option
B-A0326 Excentric turning and milling operation |
| Program state control |
With the program state control of the part state
is retained on the control and / or influenced. Particularly suitable
for multi-channel machines. |
| Tool sort cykle |
Order of the tools in the chain magazine according
to the respective call in editing program. Time-optimized sort in
chain magazine by using the shuttle instead of the spindle. No
relocation of multitools. |
| Multi-thread cycle 2.0 |
Multi-thread cycle 2.0 Cycle to create position
orientated threads with free contours, pitches and free number of
threads, e.g. for big transmission or special threads. Targeted
overlapping of threads with cross-holes, e.g. redirection systems with
ball |
| gearSKIVING 2.0 |
Technology cycle for machining of straight,
helical or convex (convex only for external gears) internal or
external gears with conical shaped skiving tools up to module 4 (CTX
TC / TC 4A) module 2 (CTV DF) |
| Broaching |
Technology cycle with dialog-guided programming
for the production of any keyways according to DIN6885 or driving
grooves according to DIN138 with standard tools. This option
contains the technology cycle with the corresponding input mask. |
| Y-Axis Parting |
Technology cycle to parting off the workpiece by
the Y-axis to achieve significantly higher feed, more process
stability and less material loss. This option contains the technology
cycle with the corresponding input mask to simplify the operation
and |
| 3D quickSET (with toolkit) |
3D QuickSET for turn-mill machines - Toolkit
(consisting of magnetic foot holder with measuring ball and dial
gauge) - For review and correction of the kinematic accuracy of
conventional turning and 5-axis simultaneous machining - Requires
5- |
| ATC |
Application Tuning Cycle ATC - Demand-oriented
adjustment of axis dynamics for machining tasks: accuracy (contour
accuracy) / surface (smoothing) / speed (high dynamics) - Beneficial
for turning-milling operations (2+1 / 3+2 / 5-axis
simultaneous) |
| Chuck rinsing device, mainspindle |
Chuck rinsing device for main spindle,
outside |
| Chuck rinsing device, subspindle |
Chuck rinsing device for subspindle, outside |
| Tailstock function for counter
spindle |
Tailstock function for the counter spindle,
mechatronic control of the supporting force, selectable per program
Thrust force 250-600 daN, CTX beta / CTX beta TC. Thrust force
250-1200 daN, CTX gamma TC |
| Counter spindle ISM 52 |
Counter spindle as integrated spindle motor ISM 52
(instead of tailstock) - drive power (100%-40%ED) 20/27 KW
(26.8/36.2 hp) - partial hollow clamping (hydraulic) - draw tube ID
52 mm - C axis and spindle brake (hydraulic) - basic slide (Z3),
AC s |
| Hinged type chip conveyor |
Hinged typ chip conveyor incl. coolant tank and
coolant pump, 6 bar (87 psi)/20 litre/min |
| BFU 8/20 bar, 600 l |
Compact coolant system, consisting of: - coolant
tank, 600 litre/158.5 gal - 8 bar/20 litre/min (CTX gamma TC 2nd:
8 bar/80 l/min /116 psi/ 21.1 gal/min) and 20 bar/25 litre/min
(theoretical pump performance) (116.psi/5.2 gal/min and 290
psi/6 |
| Chain magazine for 48 tools HSK-A 63 |
Tool magazine, 48-fold chain magazine with double
gripper with cam drive instead of tool disc magazine, tool reception
HSK-63A DIN 69893. only with Siemens control. Surcharge |
| Automatic actuation of sliding cover,
electrical |
Automatic actuation of sliding cover, electrical.
(Remark: option B-L7250, automatic loading hatch is not possible) |
| Workpiece touch probe TC60, BLUM |
Workpiece touch probe TC60, BLUM with cycle
package Quickstart Interchangeable in turning/milling spindle incl.
an sending and receiving unit and one probe tip |
| Protection Package |
Protection Package consisting of: - MPC 1.0 -
Macine Protection Control - Easy Tool Monitor 2.0 |
| Electrical interface for Robo2Go |
Electrical interface standard Profibus for Robo2Go
(Only at Siemens control) Incl. - Additional compressed air supply -
Additional Ethernet interface - Power supply of the robot by the
machine - User interface integrated into CELOS (with CELOS 3
as |
| proTIME |
proTIME Visualisation of the remaining runtime,
remaining workpieces and the machine state |