| Plug-in board with 2x4 free
in-/outputs |
Inputs / outputs programmable via
M-functions, consisting of: 8 inputs 4 outputs, 2 amperes 4 outputs,
potential-free |
| Ext. number of tool data/tool
offsets |
Extended number of tool data and tool offsets to
3000 tool offsets at max. 1500 available tool data (max. 8 cutting
edges) |
| Technologie cycle alternating speed |
Technology cycle for the application of an
alternating speed for vibration sensitive set-ups (Only in conjunction
with Siemens control) |
| Y-Axis Parting |
Technology cycle to parting off the workpiece by
the Y-axis to achieve significantly higher feed, more process
stability and less material loss. This option contains the technology
cycle with the corresponding input mask to simplify the operation
and |
| Tool monitoring system Artis |
tool break monitoring system make Artis, Type
CTM. |
| Chuck rinsing device, outside |
chuck rinsing device, outside (main spindle) |
| Chuck rinsing device, outside, counter
spindle |
Chuck rinsing device for counter spindle,
outside |
| Clamping with balan. pressure motor-adj.
valves MS |
Clamping with balanced pressure for the main
spindle with motor-adjustable valves The clamping pressure can be
specified by the NC program |
| Clamping with balan. pressure motor-adj.
valves CS |
Clamping with balanced pressure for the counter
spindle with motor-adjustable valves The clamping pressure can be
specified by the NC program |
| Tailstock function for counter
spindle |
Tailstock function for the counter spindle,
mechatronic control of the supporting force, selectable per program
Thrust force 250-600 daN, CTX beta / CTX beta TC. Thrust D41052871
force 250-1200 daN, CTX gamma TC |
| Counter spindle ISM 76, Y-axis |
- Counter spindle as integrated spindle motor,
ISM 76 synchron drive rating (100%/40% d.c.) 25/32 kW (33.5/42.8
hp) - Clamping attachment, hydraulic, draw tube diameter 67 mm (2.63
in) coolant through the spindle, - pneumatic work piece
ejecting |
| Bar machining package ø 77 mm |
- part catcher with conveyor belt removal to the
left for parts up to Ø 75 mm x 200 mm max. component weight 6 kg
- hydraulic hollow clamping attachment Pullforce 72 kN at pmax 45
bar inner dia. of draw tube max. 77 mm Tie-rod not accordin |
| Extension of the discharge chute about
300 mm |
Extension of the discharge chute at the chip
conveyor about 300 mm |
| BFU 8/80 bar, freq. con., 980 l,
cooler |
Compact coolant system, consisting of: - coolant
tank, 980 litre - 8 bar/80 litre/min and 80 bar/11 litre/min
(theoretical pump performance) with frequency-controlled pumps
programmable via M- and H-functions coolant supply
turning/milling |
| Hinged type chip conveyor |
Hinged typ chip conveyor incl. coolant tank and
coolant pump, 6 bar (87 psi)/20 litre/min |
| Tool gauging device in the working
area |
Tool gauging device in the working area, manually
swivellable |
| Window rinsing of the security
window |
Window cleaning of the security window of the
working area door by compressed air (Remark: The employment of coolant
can limited the view on the workpiece at machining) |
| Design version BLACK |
Design version BLACK Working area door, front
cover beneath Working area door and front pane frame in colour deep
black |
| Package for increased ambient
temperature |
Package for increased ambient temperature
consisting of cooling system for control cabinet (until 40º) |
| Special equipment |
Signal preparation for a Siemens fire
extinguishing system. |