| Excentric turning and milling
operation |
Excentric turning and milling operation
(only with Siemens control) |
| crownHobbing |
crownHobbing Technology cycle with dialog-guided
programming for the production of hirth gearing by the method of
impact tooth milling. This option contains the technology cycle with
the corresponding input mask. |
| Interpolation turning |
Turning-recessing cycle Manufacture of simple
sealing Surfaces and grooves using turn/mill centers |
| Counter spindle centre |
Complete machining of shaft components without
process interruptions on turn/mill centers with counter spindle. Cycle
for automatic exchange of a center into the counter spindle and back
into the tool magazine. The centre is not included in the
delivery |
| Technologie cycle alternating speed |
Technology cycle for the application of an
alternating speed for vibration sensitive set-ups (Only in conjunction
with Siemens control) |
| Polygon Turning |
Polygon Turning for machining of elliptic and
polygonal shapes on end faces Note: Only in combination with option
B-A0326 Excentric turning and milling operation |
| Program state control |
With the program state control of the part state
is retained on the control and / or influenced. Particularly suitable
for multi-channel machines. |
| Run-time monitor |
Graphic display of the program runtime (main and
idle times) of up to 3 channels on the control system |
| Broaching |
Technology cycle with dialog-guided programming
for the production of any keyways according to DIN6885 or driving
grooves according to DIN138 with standard tools. This option
contains the technology cycle with the corresponding input mask. |
| Y-Axis Parting |
Technology cycle to parting off the workpiece by
the Y-axis to achieve significantly higher feed, more process
stability and less material loss. This option contains the technology
cycle with the corresponding input mask to simplify the operation
and |
| ATC |
Application Tuning Cycle ATC - Demand-oriented
adjustment of axis dynamics for machining tasks: accuracy (contour
accuracy) / surface (smoothing) / speed (high dynamics) - Beneficial
for turning-milling operations (2+1 / 3+2 / 5-axis
simultaneous) |
| autoCHUCK |
Technology cycle for automatic determination and
setting of the drive parameters of the main and counter spindle for
optimization of the control and positioning behavior in dependency on
component and chuck weight, The drive parameters can be set in
the |
| Gear Broaching |
Technology cycle for pushing internal and
external gear teeth on components with single-tooth or multi-tooth
shaping tools. The workpiece, the tool and the process parameters can
be specified via an operating mask by the user. Important settings
of |
| FreeTurn |
Technology cycle for easy use of FreeTurn tools
from CERATIZIT. It enables the setting of any angle of the available
cutting edges and contributes to the simple integration of the tools
in the NC program. Pressing or pulling cuts are freely
adjustable. |
| Multi-thread cycle 2.0 |
Multi-thread cycle 2.0 Cycle to create position
orientated threads with free contours, pitches and free number of
threads, e.g. for big transmission or special threads. Targeted
overlapping of threads with cross-holes, e.g. redirection systems with
bal |
| Chuck rinsing device, mainspindle |
Chuck rinsing device for main spindle,
outside |
| Chuck rinsing device, subspindle |
Chuck rinsing device for subspindle, outside |
| Dynamic two-pressure clamping at the
control, MS |
Dynamic two-pressure clamping at the control for
the main spindle The clamping pressure can be specified by NC
program |
| Dyn. two-pressure clamping, motor-adj.
valves CS |
Dynamic two-pressure clamping for the counter
spindle with motor-adjustable valves The clamping pressure can be
specified by the NC program |
| Hollow spindle stop dia. 67 mm |
Hollow spindle stop, adjustable, mounted at the
rear of the clamping device dia. 67 mm (2.63 inch) (independent to the
chuck) |
| Tailstock function for counter
spindle |
Tailstock function for the D41152871 counter
spindle, mechatronic control of the supporting force, selectable per
program Thrust force 250-600 daN, CTX beta / CTX beta TC. Thrust force
250-1200 daN, CTX gamma TC |
| Counter spindle ISM 65, A2-8 |
Counter spindle as integrated spindle motor, ISM
65, A2-8 - Drive power 14/17 kW (18.7/22.7 hp) (S1-100%d.c. /
S3-40%d.c.), - Torque 275/345 Nm (202.8/354.4 lbft) (S1-100%d.c.
/ S3-40%d.c.), - Speed range 0-5.000 rpm - Partial hollow clampin |
| Hinged type chip conveyor |
Hinged typ chip conveyor incl. coolant tank and
coolant pump, 6 bar (87 psi)/20 litre/min |
| BFU 8/20 bar, 980 l, cooler |
Compact coolant system, consisting of: - coolant
tank, 980 litre 8 bar/20 litre/min (CTX beta 2000 TC, CTX gamma TC
2nd: 8 bar/80 l/min) and 20 bar/25 litre/min (theoretical pump
performance) programmable via M-functions coolant supply
through |
| Workpiece touch probe RMP40,
Renishaw |
Workpiece touch probe RMP40, Renishaw -
Interchangeable in turning/milling spindle - Probe reception and
tracer point with data transfer between probe and receiver by
radio signals - Incl. measuring cycle package Inspection Plus Notes:
- Custom meas |
| Tool pre-setting probe,make RENISHAW |
Tool pre-setting probe, make Renishaw positioned
over the spindle axes, composed by: - Laser measuring device NC4 with
measuring and calibration software for measuring in diametre- length
and wear of the multi-insert boring and milling tools; -
Measuring |
| Automatic actuation of sliding cover,
electrical |
Automatic actuation of sliding cover, electrical.
(Remark: option B-L7250, automatic loading hatch is not possible) |
| Protection Package |
Protection Package consisting of: - MPC 1.0 -
Macine Protection Control - Easy Tool Monitor 2.0 |
| Electrical interface for Robo2Go |
Electrical interface standard Profibus for Robo2Go
(Only at Siemens control) Incl. - Additional compressed air supply -
Additional Ethernet interface - Power supply of the robot by the
machine - User interface integrated into CELOS (with CELOS 3
as |
| Package for tropical climate (ambient
temp.50ºC) |
Package for tropical climate for ambient
temperature of max. 50ºC, consisting of cooling system for control
cabinet (until 50º) and machine |
| Package for instable supply |
Package for instable supply consisting of under
voltage circuit-breaker and Z-axis / Z-axes feed motor (s) with brake
(s) |
| proTIME |
proTIME Visualisation of the remaining runtime,
remaining workpieces and the machine state |
| Window rinsing of the security
window |
Window cleaning of the security window of the
working area door by compressed air (Remark: The employment of coolant
can limited the view on the workpiece at machining) |
| PDA light |
Signal provision for production data acquisition.
There are 6 signals as potential-free contacts provided. |
| NETservice |
DMG MORI NETSERVICE Qualified support by
Internet-based remote diagnostics |
| IoTconnector |
DMG MORI IoTconnector The IoTconnector allows the
use of online services of DMG MORI (e.g. NETSERVICE or MESSENGER on
ADAMOS) |