Specifications of the straightening machine RM2300/8/9 Engine power in KW: 22KW Straightening machine width: 2300 mm Max directional width 2200 mm Straightening rollers Number: 9 pieces Straightening roll diameter: 95 mm Support rollers Number: 22 pieces Support rollers below: 12 pieces Support rollers on top: 10 pieces Sheet thickness max: 8 mm

Qty. 1 Second-hand cut-to-length line Mfc.: Ungerer Built: 1966 Material: Stainless steel Strip Width: 300 mm- 1500 mm Thickness: 1.5 mm (stainless steel) Cut length: 750 mm- 6000 mm Length adjustment: mechanical Coil weight: 9.000 kg Coil min/max inner Ø: 500 & 600 mm Shear Type: Rotary Hydraulic system Stacker capacity: 2000 ton PLC: Allen Bradley Scope of supply: Decoiler Crop shear Edge trimmer Leveller PVC film applicator Stacker Camera system

Various parts for straightening machines Ungerer, strip width 1500 - 1700 mm - Straightening rollers, stutz rollers, bearing frames, coupling shafts .. - Gears - Engine - Gearboxes, etc. More info on request  ...

• more information

material width: 1650 mm material thickness: 2,00 mm no. of straightening rolls: 23 sheet thickness - min.: 0,50 mm diam. of the rolls ca.: 53,60 mm straight. rolls-needle bearings: ja / yes between stands ca.: 1750 mm barrel length ca.: 1820 mm straight. speed ca.: m/ min total power requirement: 58 kW weight of the machine ca.: 19,60 t dimensions of the machine ca.: 6,00 x 3,00 x 2,90 m Number - supports 14 (7 x above/7 x below) with support rollers Number - support rollers 174 ( 84 x above / 91 x below) Support roller dia. approx. 112mm Drive power - main drive 55 kW Motorized height adjustment Electromotive tipping device Crowning (support adjustment (below) mechanical/manual) and individ ...

Frequency-controlled drive motor UNGERER Drive test bench Power 0.0540 to 16.4 KW Voltage 28-420 V Speed 10 to 3,000 rpm adjustable motor with - Siemens frequency inverter with SIMOREG K controller - External fans Emergency Out Facility Hand control unit Frequency: Type: SIMOREG K Power 6 KW to 774 KW

pressure:300 t distance between columns:1900 mm stroke:600 mm total power requirement:30 kW weight of the machine ca.:27 t dimensions of the machine ca.:2900 x 3500 x 5400 mm Return Capacity:40 t Main Cylinder:Ø 370 x 350 mm :2 Stk. Ø 80 x 50 mm speed of forward flow:150 mm/sec Return Speed:150 mm/sec Table size:1800 x 1800 x 150 mm Ram plate:1800 x 1800 mm demand for oil:ca. 700 l :max. 900 sec Daylight Opening:900 mm pressure speed:15-8 mm/sec auxiliary motor:5,5 + 2,2 kw auxiliary pump:22 + 5,5 cc Lineal mess stab NOVOTECHNIK:650 mm Table height above ground level (approx.):1000 mm Light sensors front and rear of SICK:900 + 150 mm Monitor:12 Zoll Hydraulic and mechanical protection of t ...

pressure:400 t distance between columns:2300 mm stroke:600 mm total power requirement:37 kW weight of the machine ca.:25 t dimensions of the machine ca.:3300 x 2800 x 5200 mm Main Cylinder:Ø 440 mm :2 Stk. Ø 100 x 60 mm speed of forward flow:200 mm/sec Return Speed:200 mm/sec Table size:2200 x 1400 x 150 mm Ram plate:2200 x 1400 mm demand for oil:ca. 900 l :max. 600 sec Daylight Opening:900 mm pressure speed:15-8 mm/sec auxiliary motor:5,5 + 2,2 kw auxiliary pump:22 + 5,5 cc Lineal mess stab NOVOTECHNIK:650 mm Table height above ground level (approx.):1000 mm Light sensors front and rear of SICK:900 + 150 mm Monitor:12 Zoll Hydraulic and mechanical protection of the plunger Two-piece auxil ...

pressure:100 t distance between columns:3000 x 1500 mm stroke:500 mm total power requirement:30 kW weight of the machine ca.:16 t dimensions of the machine ca.:4000 x 2500 x 4500 m Master cylinder:1 Stück main cylinder:135 x 90 Ø mm Auxiliary cylinder:2 Stück Auxiliary cylinder:90 x 50 Ø mm Table size:3000 x 1500 (mit T-Nuten) mm Ram plate:3000 x 1500 (mit T-Nuten & Federschweisungen) mm work height max.:900 mm pre-running speed:125 mm/sec return speed:100 mm/sec Speed printing phase:40 - 8 mm/sek. Hydraulic block:REXROTH demand for oil:500 l pressure control:über PLC Controll:Zweihandbedienung Daylight Opening:600 mm fied interior wide:3100 mm auxiliary motor:5,5 + 2,2 kw auxiliary p ...

pressure:500 t distance between columns:1500 x 800 mm stroke:800 mm total power requirement:45 kW weight of the machine ca.:25 t dimensions of the machine ca.:2200 x 2200 x 4800 m Master cylinder:1 Stück main cylinder:500 Ø mm Auxiliary cylinder:2 Stück Auxiliary cylinder:120 x 80 Ø mm Table size:1500 x 1400 (mit T-Nuten) mm work height max.:950 mm pre-running speed:190 mm/sec return speed:200 mm/sec Speed printing phase:20 - 8 mm/sek. Hydraulic block:REXROTH Oil Tank Capacity:1500 l demand for oil:1300 l pressure control:über PLC Daylight Opening:1200 mm fied interior wide:1500 x 800 mm auxiliary motor:5,5 + 2,2 kw auxiliary pump:22 + 5,5 cc pre-run valve:NG pressure stop valve:max. 6 ...

- Dimensions of the rods: Ø 35 mm - 2,200 mm - Set: 2 x 5 pcs. - Dimensions (W x D x H): in box 1.45 x 2.38 x 0.38 m Details The Mikado rods were individually manufactured by a booth builder on behalf of an automobile manufacturer for the 2020 Geneva Motor Show. The installation was to be located in the Exclusive Lounge of the exhibition stand. Due to Corona, the motor show was cancelled and so the bars were never used. There are two sets: Set 1: Rod Power yellow, Rod Drive white, Rod Thrill red, Rod Performance green, Rod Attetude blue; Set 2: Rod Drive green, Stab Performance blue, Stab Thrill yellow, Stab Attetude white, Stab Power red; The sets can be used, for example, in t ...