approx. 20000 hours Find more here - / Contact us at -  ...

• more information

Control MANUAL PLUS CNC 2-axis cycle control Turning diameter 500 mm Turning length 1500 mm Turning diameter over carriage 290 mm Flat travel 260 mm Speed 2800 1/min. Tool holder at your fingertips Tailstock  ...

• more information

GILDEMEISTER NEF Plus 500 CNC lathe was manufactured in 1997. The machine, designed for precision machining of workpieces with a maximum diameter of 500 mm, has two spindles (main spindle and sub-spindle) of high speed and power, which will improve even the most intensive machining. The installed GRUNDING CNC controller with colour screen and control panel also allows for cycles to control. The total weight of the machine is approximately 3000 kg. Technical specifications of the GILDEMEISTER NEF Plus 500 lathe - CNC control: GRUNDIG - maximum turning diameter (over bed): 500 mm - maximum turning diameter (over saddle): 290 mm - maximum turning length: 1500 mm - main spindle rotationa ...

greates pass round over bed: 500 mm swing diameter over bed slide: 285 mm turning length: 1500 mm control: HEIDENHAIN control: MANUAL PLUS centre height: 250 mm centre distance: 1500 mm spindle bore: 70 mm spindle turning speed range: 8 - 2800 U/min spindle head: DIN 55027 Gr. 8 spindle drive: 11 kW max. torque on the spindle: 1050 Nm feed power X/Z axis: 5000 / 10.000 N rapid traverse X-axis: 6 m/min rapid traverse Z-axis: 8 m/min tailstock quill diameter: 80 mm tailstock quill stroke: 180 mm tailstock taper MT: 5 total power requirement: kW weight of the machine ca.: 3,1 t dimensions of machine L x W x H: 3,30 x 1,92 x 1,93 m Accessories: 3-jaw chuck FORKARDT 250 mmø, 3-jaw chuck FORKARDT ...

Technical Details greates pass round over bed 500 mm swing diameter over bed slide 285 mm turning length 1500 mm control HEIDENHAIN control MANUAL PLUS centre height 250 mm centre distance 1500 mm spindle bore 70 mm spindle turning speed range 8 - 2800 U/min spindle head DIN 55027 Gr. 8 spindle drive 11 kW max. torque on the spindle 1050 Nm feed power X/Z axis 5000 / 10.000 N rapid traverse X-axis 6 m/min rapid traverse Z-axis 8 m/min tailstock quill diameter 80 mm tailstock quill stroke 180 mm tailstock taper MT 5 weight of the machine ca. 3,1 t dimensions of machine L x W x H 3,30 x 1,92 x 1,93 m Accessories 3-jaw chuck FORKARDT 250 mmø, 3-jaw chuck FORKARDT 315 mmø ...

Technical Details greates pass round over bed 500 mm swing diameter over bed slide 285 mm turning length 1500 mm control HEIDENHAIN control MANUAL PLUS centre height 250 mm centre distance 1500 mm spindle bore 70 mm spindle turning speed range 8 - 2800 U/min spindle head DIN 55027 Gr. 8 spindle drive 11 kW max. torque on the spindle 1050 Nm feed power X/Z axis 5000 / 10.000 N rapid traverse X-axis 6 m/min rapid traverse Z-axis 8 m/min tailstock quill diameter 80 mm tailstock quill stroke 180 mm tailstock taper MT 5 weight of the machine ca. 3,1 t dimensions of machine L x W x H 3,30 x 1,92 x 1,93 m Accessories 3-jaw chuck FORKARDT 250 mmø, 3-jaw chuck FORKARDT 315 mmø ...

Description of the machine: This machine is suitable for turning chuck and shaft workpieces. The commercially available types of steel, cast iron, copper, aluminum, brass, gunmetal and cuttable plastic can be turned on this machine. --> Concept of the N.E.F. plus The machine is supplied as standard with the equipment described below - Cycle control - AC main drive - Combination slide with AC drive and control panel - Tailstock movable with tailstock clamp, manually clamped, with subsequent centering point - Coolant supply - Chip protection hoods, manually operated - Protective hood for chuck - Quick-change tool holder Hahn & Kolb Multifix C - Reducing ring for turning spindle Accessories as  ...

Manufacturer: Gildemeister Model N.E.F. 320 K Year of construction 2004 Condition Used Siemens control system Specifications Circulation diameter 320 mm Turning length 750 mm Speed range - main spindle 3500 rpm Drive power - main spindle 9 kW Bar diameter 50 mm Tool holder Multifix size B Tailstock mount MK 5 Rapid traverse X / Z 8 / 10 m/min Machine weight approx. 2.5 t Space requirement approx. 2500 x 1800 x 1885 mm Accessories: 3 Jaw chuck Forkardt 200 Tool package Documentation

Cycle-controlled lathe GILDEMEISTER NEF 720 With control MANUAL PLUS 4110 Year of construction: 2001 Spindle bore: 92 mm Center width: 1500 mm Circulation O above bed : 710 mm Circulation O over face slide: 410 mm Center height: 350 mm Speed range: 36 – 1800 rpm infinitely variable With the following accessories: Slide protection with interior lighting Multifix Tool Holder Coolant system 3 jaw chuck Forkhardt 0 315 mm ICP Contour Programming Tailstock with extendable drill quill Chip pan Operating instructions

Center width 1500 mm Control Heidenhain Manuall-Plus Multifix Size C 8-fold disc turret Fabr. Sauter  ...

• more information