Molding machine of Mag Type: Ergotech, 150/500-840 concept control: NC 4 year of construction: 2001 Clamping unit Clamping force t Gap 150 mm: 500 Holm dimension mm: 500 x 500 min/max height mm: 275 / 585 Plate size: 1085 x 1185 injection unit Screw diameter mm: 50 Injection weight gr: 402 Injection volume cm m³: 442 Spray pressure bar: 1946 Dimensions and weights Dimensions Lxwxh m: 5.2 x 1.6 x 2.1 machine weight kg: 7,800

Manufacturer: Demag Type: 80/420 - 310 concept Built: 2005 Control: NC 4 Control Type of closure: Hydraulish Closing force: 800 kN Tie bar ratio: 420 mm x 420 mm Plate size: 580 mm x 590 mm WZ Installation height: 250 mm Opening distance: 500 mm Plate spacing max: 750 mm Screw: 35 mm Lifting volume: 149 gram PS / 168.3 cc Spray pressure: 2020 bar General Engine: 18.5 kW Heater: 8.8 kW Dimensions: 3.9 m x 1.4 m x 1.9 m Weight: 4100 kg Screen text: German Optional extras Core train: x1

Manufacturer: Demag Type: 100/420 - 430 concept Built: 2004 Control: NC 4 Control Type of closure: Hydraulish Closing force: 1000 kN Tie bar ratio: 420 mm x 420 mm Plate size: 590 mm x 600 mm WZ Installation height: 250 mm Opening distance: 500 mm Plate spacing max: 750 mm Screw: 40 mm Lifting volume: 231 cc / 205 gram PS Spray pressure: 2020 bar General Engine: 18.5 kW Heater: 11.1 kW Dimensions: 4.9 m x 1.6 m x 2.1 m Weight: 4800 kg Screen text: German Optional extras Core train: x1 Air valve: x1 Robot interface

Manufacturer: Demag Type: Ergotech 35/320 - 120 concept Year of construction: 2005 Control: NC 4 Control Closing type: Hydraulic Closing force: 350 kN Tie bar spacing: 320 mm x 320 mm Plate size: 460 mm x 450 mm Tool height: min 180 mm Opening distance: 350 mm Plate spacing max.: 530 mm Screw: 30 mm Lifting volume: 88.3 cc / 78 gram PS Injection pressure: 1393 bar general Engine: 11 kW Heating: 8.3 kW Dimensions: 3.4 m x 1.2 m x 1.8 m Weight: 2750 kg Screen text: German Additional equipment Robot interface Core train: x1 Air valve: x1 Temperature control point for hot duct

Description ...

• more information

Demag concept 420/810-2300 year 06 We offer a Demag injection molding machine in working condition. Used only in morning shifts and in semi-automatic mode. Must be seen in operation at our injection plant ...

• more information

Catalog No. : 7418 Type: Concept 420/810-2300 Producer: Demag Made in: 2006 Characteristic: Clamping force: 420 t Closing force: 4200 kN Screw diameter: 70 mm Injection capacity: 891 cm³ Injection weight: 800 g Height of the plate for mounting the mold: 1200 mm Width of the plate for mounting the mold: 1100 mm Distance between the columns (horizontal): 800 mm Distance between the columns (vertical): 710 mm Maximum injection pressure: 1877 bar Mold height: 820 mm Machine length: 7800 mm Machine width: 2200 mm Machine height: 2400 mm Weight of the injection molding machine: 20000 kg

Stock No.: 503175 Manufacturer: DEMAG Type: concept 35-80 Control: NC4 Year of Make: 2004 Clamping force: 350 kN Wooden dimension h x v: 280 x 280 mm Panel size h x v: 460 x 450 mm Min. installation height: 105 mm Plate spacing max.: 455 mm Opening travel: 350 mm Screw diameter: 18 mm Displacement: 23 cc Spray pressure: 2868 bar Screw length: 20 l/d Equipment: Screen text German CEE socket 16A Machine with material hopper Machine with water battery Levelling elements Schuko socket 10A Machine dimensions LxWxH: 3.3m x 1.2m x 2m Total Weight: 2620KG

Demag Ergotech Concept 420/810-2300 with the Wittmann-Demag W721 robot Year of Make: 2006 Injection unit: Screw diameter: 60 mm Injection weight: 800 g Spray pressure: 2420 bar Dosing volume: 891 ccm Clamping unit: Clamping force: 420 t Tiebar spacing: 800x710 mm Size of the clamping plates: 1200x1100 mm Ejector: hydraulic Clamping unit: toggle lever Control: NC4 Additional equipment: Machine in very good technical condition Euromap 67 Robot interface Air Valve x 4 Hydraulic, needle-core pull, controlled by a proportional valve - from the side of the movable plate x 2 Hydraulic, needle-core pull, controlled by a proportional valve - from the side of the solid plat ...

Demag Ergotech Concept 35/280 – 80 Clamping force: 35t Year of construction: 2006 Shot capacity: 30g Injection unit .../80 Screw diameter: 22 mm Injection pressure: 2061 bar Shot capacity: 30 g Hydraulic drive power: 7,5 kW Cylinder heating capacity: 5,1 kW Clamping unit 350/... Clamping force: 35 t Plate size: 460 x 450 mm Distance between tie bars: 280 x 280 mm Opening stroke: 350 mm Max. plate spacing: 530 mm Ejector stroke: 100 mm Weight: 2750 kg Machine dimensions (LxWxH): 3,2 x 1,2 x 2,0 m Equipment: -Filling hopper -Sorting flap -Bimetallic plasticizing system -Hydraulic core on a movable plate -1 x pneumatic valve