-X-Way-700mm -Y-way-700mm -Z-way-700mm -Control-ITNC 530 -Spindle holder HSK A63 -Spindle speed-12000rpm -Plate changer with 7 pallets -Tool magasin with 120 -Internal cooling feeder-40bar -Spindle motor-20kW -Pallet size 500x500mm -Machine weight approx.16t -Top condition,to be visited under electricity

x-travel: 600 mm y-travel: 560 mm z-travel: 560 mm Control: SIEMENS 840 C total power requirement: 12 kW weight of the machine ca.: 10000 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.  ...

• more information

Lid Maho DMC-200 U serie 1512 5-axis CNC universal machining center, simultaneous Control: Heidenhain iTNC 530 Table size: 1600x1400 mm Table load: 3500 kg Number of pallets: 2 x Maximum workpiece diameter x height: 1950x1100 mm Travel X-axis: 1800 mm Travel Y-axis: 2000 mm Travel Z-axis: 1100 mm C-axis table rotation: 360° B-axis travel: -7/187° Spindle speed: 18000 1/min Spindle cone: HSK-A63 Spindle motor: 28/19 kW Magazine capacity: 120 Required footprint: 11200x12300 mm Height: 4375 mm Weight: 58000 kg For any questions about the machine, as well as a scheduling for the inspection, we ask you to contact us by phone or e-mail.

Lid Maho DMC 64 V linear Year of construction 2003 The MMC was overhauled in October, as well as the rectifier. The spindle motor has been overhauled - The encoder is new as well as the glass scale in X. Location: Bochum  ...

• more information

CNC Machining Center Vertical DECKEL-MAHO - DMC 635 V Built in 2006 in good condition. Control iTNC 530 Heidenhain Duty Cycle: 35172 Hours: 5903 Specifications: x-travel 635 mm y-travel 510 mm z-travel 460 mm Main Spindle: Speed range - main spindle 20 - 8,000 min/-1 Drive power - main spindle 13 / 9 kW Tool holder SK 40 DIN 69871 Max. torque 83 / 57 Nm Clamping force 8 kN Workbench: Table clamping surface 790 x 560 mm Number of T-slots 4 + 1 T-slots - spacing 100 mm T-slots - width 4x 14H12 / 1x 14H7 mm max. table load 600 kg Table height above floor 720 mm Distance between spindle nose and table 120 - 580 mm Tool changer: Number of tool slots 20 pos. Max. t ...

Control Heidenhain TNC 620 Travel X/Y/Z: 1035/560/510 mm, Spindle speed: 12,000 min-1, Tool magazine for 30 Wkz., SK 40, Cooling by the spindle 12 bar, Conveyor  ...

• more information

CNC Vertical Machining Center "DECKEL MAHO DMC 635 eco" With path control Siemens 810 Powerline Year of Make: 2010 Travel: X 635 Y 510 Z 460 Speed range: 20 – 8,000 rpm infinitely variable With the following accessories: Rigid angle table 790 mm x 560 mm clamping surface Vertical tool changer with 20 magazine positions Electronic handwheel Tool length measurement Heidenhain TT 140 Full protection cabin with sliding doors and interior lighting Coolant Setup Signal light 4 colour Conveyor Chip rinsing gun 3 Height Adjustable Machine Shoes Operating instructions

red button leads directly to the auction ! Vertical machining center Commission mandate in dream condition from model operation, few operating hours - regularly maintained and cared for perfect in precision and geometry - can be tested Year of construction 2002 Total Duty Cycles 37,035 Spindle Hours / Machining Hours 8,930 Milling spindle ( 10,000 revolutions per minute ) rehauled approx. 100 hours of operation, re-stocked Power Supply Module NEW 3-axis milling center Preparation for the 4th axis Siemens SINUMERIK 810D powerline control system with ShopMill for workshop-ready work step programming with simulation graphics Ethernet interface Measuring system X-axis resolu ...

DECKEL MAHO DMC 103 V CNC machining center was built in 1999 in Germany by DECKEL MAHO GmbH. The machine designed for efficient 3-axis machining of workpieces is an excellent choice for any industrial plant. The machining process is performed inside a fully illuminated workspace using reliable cutting tools and a high-speed spindle. The design of the machine perfectly dampens any vibrations and oscillations generated during machining, guaranteeing maximum stability during even the most intense challenges. All of this is complemented by the intuitive SIEMENS CNC control, which allows advanced programmes to be created in just a few steps. The offered DECKEL MAHO CNC vertical machining center h ...

The 2009 DECKEL MAHO DMC 80U is a 5-axis CNC universal milling machine. It is designed for complex machining operations in industries like aerospace, automotive, and precision engineering. Here are some typical specifications and features of this machine: - Working Range: - X-axis travel: Around 800 mm. - Y-axis travel: Around 700 mm. - Z-axis travel: Around 700 mm. - Table Size: Usually has a rotary swivel table, capable of handling heavy workpieces, often with a load capacity of up to 1,200 kg or more. - Spindle Speed: Often in the range of 12,000 RPM, sometimes higher depending on the specific configuration. - Automation Options: Often compatible with pallet changers or other automation  ...