Matec 30HV with swivel table built in 2004 with Bosch control Find more here - / Contact us at -  ...

• more information

Matec 30L built in 2014 with Bosch control Find more here - / Contact us at -  ...

• more information

MATEC forklift blades are robust and easy to build and can be attached to almost any commercial lyklift. With a fuse bolt, the tilting device can be blocked for special inserts. The front shutter flap can be mounted on any shovel. The interchangeable scraper is suitable for planing work such as removing ice, repelling soil, gravel or feed, etc. - Bucket width 1950 mm - Bucket depth type 1: 1000 mm, shovel depth type 2: 1330 mm - Bucket height without attachment 450 mm - Weight approx. 220 kg - Payload 2000 kg - Steel sheet 4 mm industrial lypainted - Fork shoes axle distance 800 mm - Fork tine width max. 170 mm - Fork thickness max. 60 mm - 4 lifting eyelets for krange slopes -  ...

Robust diesel generator with soundproofing on sled. 3-phase generator with harmonized arousal. Technical data: - Rated power 30 KVA - Diesel 495D, 4 cylinder water-cooled, 33.0 kW/45 hp - Consumption average 258 g/kWh - Electric start - Current 43.3 A - Frequency 50 Hz - Voltage 220V/3x400V - Cable outlet 40A with 20 m PUR cable 3PNE, circuit breaker 3phase, Operating hour counter - ATS (Automatic Transfer Switch) with automatic start repetition, Activation of the current cover, automatic shutdown in case of lack of oil pressure, Overheating, excessive speed - slide with 4 lifting eyelets, length approx. 2300mm, width approx. 1300 mm, height approx. 1600 mm, Weight app ...

Robust snow plough/bulldozer shield/shield combined with Hardox segment scrapers with plate suspension. Softer suspension available for pure snow removal. Shield can be shortened to 1500 mm width and reduced in height. Re-insertable for rolling the snow on top. Plastic scrapers for asphalt protection available as an option. Adapter plate for attachment to tractor, truck, etc. included in the price. For attachment to wheel loader and forklift, or front three-point height adjustment can be omitted (low price). technical data: - Shield width 2600 mm can be shortened to 1500 mm, widened up to 3600 mm - asymmetric design possible - Clearance width at 36 slants: 2100 mm - Height 875 mm (m ...

Drum chipper with 2-blade rotor, 2 counter blades, interchangeable mesh screen Infeed height 400 mm Infeed width 1690 mm 1 large feed roller above 3 smaller feed rollers down Drive electric engine 55 kW (up to 200 kW upgradeable) suitable for round timber, sawmill waste, waste wood, etc. with loading with vibro channel length 6 m, vibro drive MATEC size 3, 4 kW Disposal with vibro sieve tray length 4 m, vibro drive MATEC size 1, 3 kW for oversize feedback with -MATEC Vibrair vibrochannel pneumatical -PVC belt conveyor for returning oversized material to the chipper Machine in almost new condition, only a few hours of operation Electric plant to customer demand and allocati ...

MATEC easily from our own development and production running lightly and quietly and transport bulk material and individual loads up to 250 kg with minimal energy over long distances up to 12 m at a time with a hand drill 300 w power consumption. The combined forced - and promotion of resonance stores the kinetic energy in the spring and must compensate for only the frictional resistance of the material. Sawdust, shavings, gravel, Earth, grain, hay and grass, etc. are exactly same speed transported with approximately 17 m / min. by means of Frequenzumforner the speed can be adjusted. The transport and screening in a single operation with a built-in sieve base perforation on request MAT ...

The MATEC HMS-350 Kleinshredder for professionals, with hammer mill is suitable for crushing of green waste, etc. All types of green waste such as bouquets, garden waste, potted plants, compost in each State, agricultural waste, Earth, cemetery waste, large wood chips and small wood waste, etc. can thus be crushed. The hammer mill is equipped with impact tools made of HARDOX, the appropriate anvil blow bar and the following "data" also made of HARDOX. The content of flower pots, flower boxes, "baked together" grass cutting, etc. can thus be crushed. The combination of anvil blow bar before calibration and subsequent anvil calculation for fine crushing results a high throughput capacity  ...

The ECOSTAR 8 slices hacker with diesel drive 35 HP, 3 cyl., with an increased swivel discharge for horticulture, wine fruit, forestry, agriculture, etc. at a cheap price. With 2 blades, disk diameter 605 mm, disc speed 1200 rpm, JD diesel engine 3100, 3 cyl, 35 HP, water-cooled, feed height 200 mm, max wood diameter 200 mm, Einzugbreit 225 mm, hopper opening 600/600 mm, output per hour 5-8 cubic metres. The machine is ready for use within 1 minute. The chips can easily be abandoned on the bridge of the towing vehicle. The tedious tying of the branches fall away. Take the chips only 1 time in the hands. Watch the video movie in matnews91 on YouTube: ECOSTAR diesel JD3100 8. Price d ...

Wood chopper f. tractor PTO wood chipper ECOSTAR 8 as a kit for the self-Assembly (image mounted with other rotating device) - feeder height width 20/20 cm - upper feed roller with belt drive - disk hacker with 2 knives and 1 counter knife - rated about 5 cubic metres chip length nominal 15 mm - CE compliant - PTO - rotating ejector - delivered in metal crates -Warranty: 2 years on all non - consumable - options for an additional fee: - machine Assembly by supplier - pulverizing integrated to avoid excess - special execution for the manufacture of Pelletschnitzeln with 6 mm length - professional Rotary chute which together does not rust and freezes at Sub-zero temperatures, with lever -  ...