Process chiller / chiller air-cooled, Type: iChiller - iC780 ICS Cool Energy Ltd iChiller iC780 P3 are air-cooled compact water chillers suitable for outdoor installation (-5°C to +46°C). Including crank tray heating, phase monitoring, buffer tank 678 ltr. and built-in P3 Circulating pump. Cold water outlet temperatures from -10°C to +30°C are adjustable. Cooling capacity kW 152 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 26 Available pump pressure (bar) 3.15 Ambient temperature (°C) 35 Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 79 Max. Current (A) 142 Starting Current Circuit  ...

Process chiller / chiller air-cooled, Type: iChiller - iC770 ICS Cool Energy Ltd iChiller iC770 P3 are air-cooled compact water chillers suitable for outdoor installation (-5°C to +46°C). Including crank tray heating, phase monitoring, buffer tank 678 ltr. and built-in P3 Circulating pump. Cold water outlet temperatures from -10°C to +30°C are adjustable. Cooling capacity kW 130 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 22.2 Available pump pressure (bar) 3.2 Ambient temperature (°C) 35 Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 72 Max. Current (A) 125 Starting Current Circuit ...

Process chiller / chiller air-cooled, Type: iChiller - iC408 ICS Cool Energy Ltd iChiller iC408 P3 are air-cooled compact water chillers that are suitable for outdoor installation (-5°C to +46°C). Including crank tray heating, phase monitoring, buffer tank 140 ltr. and built-in P3 Circulating pump. Cold water outlet temperatures from -10°C to +30°C are adjustable. Cooling capacity kW 21.7 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 3.68 Available pump pressure (bar) 2.71 Ambient temperature (°C) 35 Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 12 Max. Current (A) 20 Starting Cur ...

Air cooler, evaporator, cold room, industrial cooler, cooling unit, cooler, water cooler, cooling system, refrigeration, cold storage, refrigerated container, cold room, heat exchanger, jet stream, cooling fan -Manufacturer: Port-A-Cool, mobile cooling fan type PAC2K36HP220-50 -Fan: Diameter: 36 / 914 mm Speed adjustable -Operating pressure: max. 3.45 bar -Voltage: 230V 50Hz / 5.5A -Dimensions: 1575/820/H1590 mm -Weight: 112 kg with pallet

self-compacting container 5245/1 Size: 20m³ Manufacturer: Geesink Type: 311 11 Serial No.: 9538116 Year of Manufacture: 1995 Electrical Connection: 16A Defects noted during last inspection: Hoisting bracket, slide rails, cylinder 5132/1 Size: 12m³ Manufacturer: Husmann Type: SPB 12AN Serial No.: 10.508 Year of Manufacture: 1993 Electrical Connection: 16A Defects noted during last inspection: Floor, slide rails, cylinder 5253/1 Size: 12m³ Manufacturer: Entec Type: ECA 12 Serial No.: 14966 Year of Manufacture: 1997 Electrical Connection: 32A Find more here - / Contact us at -

Used GENIUS B-640 Compact optical sorter. Principle of operation: The product is evenly distributed on the conveyor belt and scanned by cameras and / or lasers on both sides of the different control zones. A few milliseconds later, the defects are rejected in 1 or 2 separate jets by powerful air guns located at the end of the feed belt. A good product continues its way through processing. Electrical requirements Voltage: 400V 3-phase (+ neutral and protective conductor) Power: 4kVA Frequency: 50Hz Compressed air requirements Minimum pressure: 6-7 bar (90-100 PSI) (At the entrance of the sorter) Normal consumption: 400/1500 L / min Maximum consumption: 10,000 L / min Water  ...

L 45 Kw POWER 680 Kg/h (material-dependent/full load) Active process and computer-controlled Koller PP 300 is a pellet line consisting of the following machines: - DOSING SYSTEM with an automatic PLC control from the feed of the ground material incl. rotary valve - Hammer mill with sieve 6 mm for the wood chip raw material - Pellet mill with main motor 45 kW with automatic hydraulic control system (Eur.Pat. EP1619012B1). Patented system. The pressing process is completely monitored by a controller and monitored via mobile phone. incl. minisilo for loading with level sensor; Safety system for controlling the clogging of the matrice Moisture monitoring - Cooling and dedusti ...

L 30 Kw POWER 450 Kg/h (material-dependent/full load) Active process and computer-controlled Koller PP 300 is a pellet line consisting of the following machines: - DOSING SYSTEM with an automatic PLC control from the feed of the ground material incl. rotary valve - Hammer mill with sieve 6 mm for the wood chip raw material - Pellet mill with main motor 30 kW with automatic hydraulic control system (Eur.Pat. EP1619012B1). Patented system. The pressing process is completely monitored by a controller and monitored via mobile phone. incl. minisilo for loading with level sensor; Safety system for controlling the clogging of the matrice Moisture monitoring - Cooling and dedusting system f ...

l 90 kw POWER 1350 kg/h (depending on material/full load) Active process and computer-controlled Koller PP 500 is a pellet line consisting of the following machines: - DOSAGE SYSTEM with an automatic PLC control of the feed of the ground material incl. rotary valve - Hammer mill with sieve 6 mm for wood chip raw material - Pellet mill with main motor 90 kW with automatic hydraulic control system (Eur.Pat. EP1619012B1). Patented system. The pressing process is completely monitored by a controller and monitored via mobile phone. incl. minisilo for loading with level sensor; Safety system to control the blockage of the Matritze Humidity monitoring - Cooling and dedusting system for the ...

l 45 kw POWER 680 kg/h (depending on material/full load) Active process and computer-controlled Koller PP 300 is a pellet line consisting of the following machines: - DOSAGE SYSTEM with an automatic PLC control from the feed of the ground material incl. rotary valve - Hammer mill with sieve 6 mm for wood chip raw material - Pellet mill with main motor 45 kW with automatic hydraulic control system (Eur.Pat. EP1619012B1). Patented system. The pressing process is completely monitored by a controller and monitored via mobile phone. incl. minisilo for loading with level sensor; Safety system to control the blockage of the Matritze Humidity monitoring - Cooling and dedusting sy ...