1 x L+Z lathe Colchester Mascot 1600/600 Built: c.1975 Very stable lathe. Ideal machine for locksmiths or agricultural machine mechanics. Technical data: Turning diameter over crimson: 710 mm Turning diameter over bed:432 mm Turning diameter via support:267 mm Turning length: 1,000 mm Spindle speeds:20 - 1600 rpm Spindle bore:76 mm Drive motor:5.6 kW Feeds: 0.6 - 10 mm/u Metric threads: 40 (0.4 - 14 mm incline) Machine weight approx.:2000 kg Room requirements approx.:l:2.65 x w:1.1 x h:1.6 m Accessories: 3 - Jaw lining UVA 310 mm 4 Set of change jaws Bfraed8ae0 Tripan quick-change system 4 x Interchangeable holder running counter tip in tailstock (MK 5) Counter ...

Lathe, turning machine, lead screw lathe, lead screw lathe -Handover: in the current condition as viewed -Condition: Gearbox makes noise (video) -Manufacturer: Colchester, Leadscrew and Feedscrew Lathe Type Triumph 2000 -Turning length: 1300 mm -Turning Ø over bed: 390 mm -Turning Ø over support: 240 mm -Spindle bore: Ø 55 mm -Spindle speeds: 22 - 2000 rpm -Three-jaw chuck: Ø 250 mm -Accessories: Tool holder/tools see photos -Tailstock mount: MK4 -Dimensions: 960/2435/H1640 mm -Weight: 1327 kg

turning diameter over bed: 400 mm centre height: 195 mm turning diameter over slide rest: 246 mm turning length: 650 mm spindle turning speed - stepless: 0-2500 U/min total power requirement: 7,5 kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: 2x1.3x1.6 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 400 mm centre height: 195 mm turning diameter over slide rest: 246 mm turning length: 1250 mm spindle turning speed - stepless: 0-2500 U/min weight of the machine ca.: 1,8 t dimensions of the machine ca.: 2x1.3x1.6 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Capacity Swing over bed 400mm 15.7″ Swing over cross slide 246mm 9.6″ Height of centres 195mm 7.7″ Swing in gap 585mm 23″ Gap width from faceplate 165mm 6.5″ Bed length 1270mm 50″ Distance between centres 1270mm 50″ Spindle Spindle nose D1 – 6 Camlock D1 – 6 Camlock Taper in spindle nose bush No 4 MT No 4 MT Spindle bore 54mm 2.1″ Maximum spindle speed 2500 rpm 2500 rpm Spindle speed ranges Low 14 – 300 rpm 14 – 300 rpm Medium 36 – 830 rpm 36 – 830 rpm High 109 – 2500 rpm 109 – 2500 rpm Maximum spindle motor power 7.5kW 10 HP Number of Imperial Pitches 56 56 Range of Imperial Pitches 2 – 56 TPI 2 – 56 TPI Number of Dia ...

The Colchester Combi 2000 has been overhauled and is in very good condition. Spindle motor power: 7,500 W Year of Make: 1998  ...

• more information

Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 190 mm Distance between centres: 750 mm Swing over cross-slide: 240 mm Swing over bed: 390 mm Swing in gap: 580 mm Spindle hole: 54 mm Taper in spindelstock MK: 4 Taper in spindle: Camlock: 6" D1 Spindle speeds: number (steps): 16 from: 25 rpm up to: 2000 rpm Taper in tailstock:: 4 MT Spindle stroke: 155 mm Feeds: length: from: 0.04 mm/r up to: 1 mm/r Frontal: from: 0.02 mm/r up to: 0.5 mm/r Voltage 50 Hz 3x: 380 Volt Spindle motor: 7.5 HP Machine´s weight about: 1170 kg Overall dimensions machine: Length: 2000 mm Width: 1000 mm Height: 1500 mm Various accessories: Digi ...

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: FANUC 210i-T Technical data Distance between centres: 2000 mm Turning diameter over cross-slide: 370 mm Swing over bed: 554 mm Spindle nose: D1-11 Spindle hole: 104 mm Maximum turning length: 2000 mm Cross slide: Longitudinal travel (Z-axis): 1920 mm Transversal strocke (X axis): 290 mm Main spindle: Taper in spindle: Camlock: D1-6 CAMLOCK Spindle speeds: number (steps): 3 from: 16 rpm up to: 1800 rpm Taper in tailstock: Morse taper: 6 MT Spindle stroke: 178 mm Spindle diameter: 95 mm Rapid traverse:: 10 m/min Spindle motor: 11 / 7.5 kW Voltage ...

Center height: 216 mm Center distance: 2000 mm Spindle bore: 76 mm Make: COLCHESTER Type: Mascot 1600 YOP: 1993 Swing over bed Ø:        432mm Swing over cross slide Ø:267mm Swing in the gap Ø:      710mm DBC Turning Length:      2.000mm Spindle bore:            76mm Spindle power:           7,5 kW Tailstock spindle Ø:     60Ø Stroke pinole:           120mm Spindle taper:           5Mk Speeds / ranges:         2000Rpm Length:            ...

Center height: 115 mm Center distance: 1000 mm Spindle bore: 40 mm COLCHESTER - MASTER 2500 Universal lathe Ø 335 x 1000 mm MACH - ID 6362 Make: COLCHESTER Type: MASTER 2500 YOP: 1989 Swing over bed Ø    335 mm Swing over cross slide Ø   210 mm DBC Turning Length      1.000 mm Spindle bore       40 mm Spindle power     3 kW Bed width            230 mm Stroke pinole       145 mm Spindle taper        3 Mk Speeds / ranges    2500 Rpm Anilam digital readout Multi fix B + inserts F ...