| Description: |
D-CNC ROUTER MILLING MACHINE Fresatrice CNC-STEP High-Z S-720
Specifications / Technical Data S-720
CNC-Router /
CNC-Engraver / Milling machine
With the
High-Z cnc router and engraving machine you purchase an allround
talent in TÜV-certified quality. If you want to clampand fix complex
workpieces on the worksurface, or, or, or clamp work-pieces in a high
bench vise (the cnc milling machine sits on a frame-construction, is
driven by 2 motors and therefore allows to be positioned above a piece
to be processed).
Or if you simply want to do
engraving- or drillingjobs.you can work on a flat surface, with a
pieces of sheet MDF fixed to it. Plane it once and you will be able to
work with a precision of +-0,02 mm depth.
All cnc
routers / milling machines are being delivered with black
energy-chains on all axis, which allows a better cabling management.
Also, all cnc milling machines are equipped with an emergency stop
button. An additional emergency stop you find in front of the
controller.
Basic equipment of all High-Z
CNC-milling and engraving machines / routers:
Software
ConstruCAM-3D limited ( from S-720 and S-400/T ) included
To
use the software CAD CAM ConstruCAM in full screen, you need the
milling software version WIN PCNC Economy upward
Contact free reference switch and emergency stop button as well as
22mm thick linear guide ways and individually adapted screw nuts
------------------------------------------------------------------
--------------
Equipment / Productdetails:
oDrive : 4 stepping motor by Nanotec with 1600 steps/rev
(1/8 Step)
o2 motors for constant tension and compression during
milling operation on X-Axis
oFeed through of long workpieces
possible, because there's no belt drive at the end of the X-axle
oGuide ways X and Y axle 22 mm / Z Axis 16mm, grinded and with
61hrc hardened surface
oBall bearings at both sides of trapezium
spindles Tr. 12x3 mm flank lead
oTraverse speed of rapid feed:
max. 2500 mm/min
oTechnical resolution: 0,00187 mm ( 1/8 Schritt )
oReversal error max.: +/- 30µm ( 0,03mm )
oTable size /
clamping area: 1050 x 520 mm
oTraverse Paths: X=720 mm; Y=420 mm;
Z= 110 mm
oReference- and limit switch on all axes
oDouble
safety emergency stop button
oEnergy chain for clean cabling
oTotal dinemsions incl motors: L x W x H = appr. 1070 x 690 x
500mm
oMilling Motor anchorage: Euroneck Ø43mm
oincl.
Software WIN PCNC Light (optional WIN PCNC Economy, USB or
professional)
oincl. Software ConstruCAM-3D limited (
recommended sell price full version 1902.81 EUR)
oModular
frame for universal application
oWeight appr. 41 kg
oComplete
machine Includet 4 driver microstep controller 4x 2,1 Ampere
oAn approx. 30-minute long introduction during pick up and an
unlimted telephone support are included.
oAn approx. 2 hours
long introduction and an installation of software on your brought note
book/ PC as well as a explanation of fundamental terms of Corel Draw
etc. possible, too.
------------------------------------------------------------------
--------------
Technical data contained in the
price TÜV-certified control system, tailored to the CNC milling
machine / CNC engraving machine:
o 4-Channel
Stepper motor -CNC-Controller with actual SMD-Technology
o
Main voltage 115 - 240 Volt / 47 - 63 Hz.
o Motor current 4 x
3,5 Ampere
o Microstep controller Resolution 1/10-Step /
C41244965 2000 Steps/Rev.
o 4 Connections for 4 brushless
Motor / Stepper motor
o Connection with parallel port and
Software WIN PCNC Light, Economy or USB with WIN PCNC USB or
Profi version. ( Also possible:MACH3, USBCNC, NC-Easy LINUX EMC and
LINUX CNC and much other
stepper driver software.)
o "Sleep-Function" for controlling current down
o
Oszillation motor-Connection 24 Volt by PWM controllable ( for
example: Tangential knife ) or
24 Volt constant for motor Break
by ST-plug
o 2 relais for maximum 1200 Watt by Software
switchable (up from WIN PCNC Light), 230 Volt,
max. 6,0 A / Plug
(for example Air compressor, cooling, exhaust, dust extraction).
o 0 - 10 Volt for connecting a HF converter for an high frequency
spindle
o 12 Status-LEDs for monitoring all important function
(Power, Toggle, Move, X, Y, Z, C; Overheat,
Emergency stop,
Relais: Spindle / Cooling, Short Circuit)
o Connection
possibility of 4 end- or. Reference switches and one Emergency Stop
switch
o Motor connection by D-Sub 9-pin. (C-Axis:
15-pin.)
o Emergency-Stop Switch
o Overheating
protection
o Short circuit protection
------------------------------------------------------------------
--------------
fresadora fresatrice fraiseuse
Jyrsintae fraisage machin Freesmachine Frezesanas masina frezavimo
masinos ? Frezarka Freza Fraesmaskin Frézovací stroj Frézka ?; New
ready for operation
seller offer No. resale 67805423
|