| Description: |
D-CNC ROUTER/ MILLING ENGRAVING MACHINE CNC-STEP High-Z S-400/T
Specifications / Technical Data S-400/T
CNC-Portal-Router /
CNC-Engraving machine with TÜV certification
With the purchase of the T-variation of High-Z
cnc-router you get a proven technology with a certain icing of the
cake in TÜV-certified quality. High-Z/T cnc-routers was conceived for
once more precision (repetition precision approx. 0,02mm) and
especially for higher traverse speed.
Because of
the used ball screws the High-Z/T 3D-cnc-engravers achieves a
fantastic precision and an almost unmeasurable back lash of approx.
0,01mm. At the same time there are high traverse speeds up to approx.
108mm / sec. ( 6.500 mm/min ) possible.
With this
cnc-machines you're able to carry out an engrave and mill speeds of
approx. 4500 mm/min. and express travels up to 6500mm/min.
Here's a video on a unloaded drive with the new High-Z /
T.
This 3D-milling-machine series is usable in the
industrial field as well as for works like engraving, milling,
drilling, measuring, cutting and measuring out systems as for example
adhering of adhesive on 3D outlines.
All
cnc-machines are being delivered with black energy-chains on all axis,
which allows a better cabling management. Also, all
cnc-engraving-machines are equipped with an emergency stop button. An
additional emergency stop you find in front of the controller.
Basic equipment of all High-Z CNC-milling
machines:
Software ConstruCAM-3D limited ( from S-720
and S-400/T ) included
To use the software CAD CAM
ConstruCAM in full screen, you need the milling software version WIN
PCNC Economy upward
Contact free reference switch
and emergency stop button as well as 22mm thick linear guide ways and
individually adapted screw nuts
------------------------------------------------------------------
--------------
Equipment / Productdetails:
oDrive : 4 stepping motor by Nanotec with 2000
steps/rev (1/10 Step)
o2 motors for constant tension and
compression during milling operation on X-Axis
oGuide ways X and Y
axle 22 mm / Z Axis 16mm, grinded and with 61hrc hardened surface
oFeed through of long workpieces possible, because there's no belt
drive at the end of the X-axle
oBall bearings at both sides
of ball screws on X and Y axis
oTraverse speed of rapid feed: max.
7000 mm/min
oTechnical resolution : 0,00625 mm ( 1/8 Schritt )
oReversal error max.: +/- 10µm ( 0,01mm )
oTable size /
clamping area: 730 x 400 mm
oTraverse Paths: X=400 mm; Y=280 mm;
Z= 110 mm
oReference- and limit switch on all axes
oDouble
safety emergency stop button
oEnergy chain for clean cabling
oTotal dinemsions incl motors: L x W x H = appr. 730 x 520 x 500mm
oMilling Motor anchorage: Euroneck Ø43mm
oincl. Software WIN
PCNC Light (optional WIN PCNC Economy, USB or professional)
oincl. Software ConstruCAM-3D limited ( recommended sell price
1902.81 EUR)
oModular frame for universal application
oWeight appr. 31 kg
oComplete machine Includet 4 driver
microstep controller 4 x 3,5 Amps
oAn approx. 30-minute long
introduction during pick up and an unlimted telephone support are
included.
oAn approx. 2 hours long introduction and an
installation of software on your brought note book/ PC as well as a
explanation of fundamental terms of Corel Draw etc. possible,
too.
------------------------------------------------------------------
--------------
Technical data contained
in the price TÜV-certified control system, tailored to the CNC
milling machine / CNC engraving machine:
o
4-Channel Stepper motor -CNC-Controller with actual
SMD-Technology
o Main voltage C41144965 115 - 240 Volt / 47
- 63 Hz.
o Motor current 4 x 3,5 Ampere
o Microstep
controller Resolution 1/10-Step / 2000 Steps/Rev.
o 4
Connections for 4 brushless Motor / Stepper motor
o
Connection with parallel port and Software WIN PCNC Light, Economy or
USB with WIN PCNC USB or
Profi version. ( Also
possible:MACH3, USBCNC, NC-Easy LINUX EMC and LINUX CNC and much
other
stepper driver software.)
o "Sleep-Function"
for controlling current down
o Oszillation motor-Connection
24 Volt by PWM controllable ( for example: Tangential knife ) or
24 Volt constant for motor Break by ST-plug
o 2 relais for
maximum 1200 Watt by Software switchable (up from WIN PCNC Light), 230
Volt,
max. 6,0 A / Plug (for example Air compressor, cooling,
exhaust, dust extraction).
o 0 - 10 Volt for connecting a HF
converter for an high frequency spindle
o 12 Status-LEDs for
monitoring all important function (Power, Toggle, Move, X, Y, Z, C;
Overheat,
Emergency stop, Relais: Spindle / Cooling, Short
Circuit)
o Connection possibility of 4 end- or. Reference
switches and one Emergency Stop switch
o Motor connection by
D-Sub 9-pin. (C-Axis: 15-pin.)
o Emergency-Stop Switch
o Overheating protection
o Short circuit protection
------------------------------------------------------------------
--------------
fresadora fresatrice fraiseuse Jyrsintae
fraisage machin Freesmachine Frezesanas masina frezavimo masinos ?
Frezarka Freza Fraesmaskin Frézovací stroj Frézka ?; New ready for
operation
seller offer No. resale 67805437
|