| Description: |
CNC 3D Routers Engravers CNC-STEP High-Z S-400
Specifications / Technical Data S-400
CNC Router / CNC
milling machine / Engraver
With
the High-Z CNC-router / engraver you purchase an allround talent in
TÜV-certified quality. If you want to clampand fix complex workpieces
on the worksurface, or, or, or clamp work-pieces in a high bench vise
(the cnc milling machine sits on a frame-construction, is driven by 2
motors and therefore allows to be positioned above a piece to be
processed).
Or if you simply want to do engraving-
or drillingjobs.you can work on a flat surface, with a pieces of sheet
MDF fixed to it. Plane it once and you will be able to work with a
precision of +-0,02 mm depth.
All cnc-machines are
being delivered with black energy-chains on all axis, which allows a
better cabling management. Also, all cnc milling / engraving machines
are equipped with an emergency stop button. An additional emergency
stop you find in front of the controller.
Basic
equipment of all High-Z CNC-milling and engraving machines:
Software ConstruCAM-3D limited( from S-720 and S-400/T ) included
To use the software CAD CAM ConstruCAM in full screen, you
need the milling software version WIN PCNC Economy upward
Contact free reference switch and emergency stop button
as well as 22mm thick linear guide ways and individually adapted screw
nuts
------------------------------------------------------------------
--------------
Equipment / Productdetails:
oDrive : 4 stepping motor by Nanotec with 1600
steps/rev (1/8 Step)
o2 motors for constant tension and
compression during milling operation on X-Axis
oFeed through of
long workpieces possible, because there's no belt drive at the end of
the X-axle
oGuide ways X and Y axle 22 mm / Z Axis 16mm,
grinded and with 61hrc hardened surface
oBall bearings at both
sides of trapezium spindles Tr. 12x3 mm flank lead
oTraverse speed
of rapid feed: max. 3000 mm/min
oTechnical resolution: 0,00187 mm
( 1/8 Schritt )
oReversal error max.: +/- 30µm ( 0,03mm )
oTable size / clamping area: 730 x 400 mm
oTraverse Paths:
X=400 mm; Y=300 mm; Z= 110 mm oReference- and limit switch on all axes
oDouble safety emergency stop button
oEnergy chain for clean
cabling oTotal dinemsions incl motors: L x W x H = appr. 730 x 520 x
500mm
oMilling Motor anchorage: Euroneck Ø43mm
oincl.
Software WIN PCNC Light (optional WIN-PCNC Economy, USB oder
Profi)
oModular frame for universal application oWeight appr.
31 kg
oComplete machine Includet 4 driver microstep controller 4 x
3,5 Ampere
oAn approx. 30-minute long introduction during
pick up and an unlimted telephone support are included.
oAn
approx. 2 hours long introduction and an installation of software on
your brought note book/ PC as well as a explanation of fundamental
terms of Corel Draw etc. possible, too.
------------------------------------------------------------------
--------------
Technical data contained
in the price TÜV-certified control system, tailored to the CNC
milling machine / CNC engraving machine:
o
4-Channel Stepper motor -CNC-Controller with actual
SMD-Technology
o Main voltage 115 - 240 Volt / 47 - 63
Hz.
o Motor current 4 x 3,5 Ampere
o Microstep
controller C41244965 Resolution 1/10-Step / 2000 Steps/Rev.
o 4 Connections for 4 brushless Motor / Stepper motor
o
Connection with parallel port and Software WIN PCNC Light, Economy or
USB with WIN PCNC USB or
Profi version. ( Also
possible:MACH3, USBCNC, NC-Easy LINUX EMC and LINUX CNC and much
other
stepper driver software.)
o "Sleep-Function"
for controlling current down
o Oszillation motor-Connection
24 Volt by PWM controllable ( for example: Tangential knife ) or
24 Volt constant for motor Break by ST-plug
o 2 relais for
maximum 1200 Watt by Software switchable (up from WIN PCNC Light), 230
Volt,
max. 6,0 A / Plug (for example Air compressor, cooling,
exhaust, dust extraction).
o 0 - 10 Volt for connecting a HF
converter for an high frequency spindle
o 12 Status-LEDs for
monitoring all important function (Power, Toggle, Move, X, Y, Z, C;
Overheat,
Emergency stop, Relais: Spindle / Cooling, Short
Circuit)
o Connection possibility of 4 end- or. Reference
switches and one Emergency Stop switch
o Motor connection by
D-Sub 9-pin. (C-Axis: 15-pin.)
o Emergency-Stop Switch
o Overheating protection
o Short circuit protection
fresadora fresatrice fraiseuse
Jyrsintae fraisage machin Freesmachine Frezesanas masina frezavimo
masinos ? Frezarka Freza Fraesmaskin Frézovací stroj Frézka ?; New
ready for operation
seller offer No. resale 67805453
|