| Description: |
D-CNC ROUTER MILLING MACHINE FRAISEUSE CNC-STEP High-Z S-400
Specifications / Technical Data S-400
CNC Router / CNC
milling machine / Engraver
With the
High-Z CNC-router / engraver you purchase an allround talent (optional
WIN PCNC Economy, USB or professional). If you want to clampand fix
complex workpieces on the worksurface, or, or, or clamp work-pieces in
a high bench vise (the cnc milling machine sits on a
frame-construction, is driven by 2 motors and therefore allows to be
positioned above a piece to be processed).
Or if
you simply want to do engraving- or drillingjobs.you can work on a
flat surface, with a pieces of sheet MDF fixed to it. Plane it once
and you will be able to work with a precision of +-0,02 mm depth.
All cnc-machines are being delivered with black
energy-chains on all axis, which allows a better cabling management.
Also, all cnc milling / engraving machines are equipped with an
emergency stop button. An additional emergency stop you find in front
of the controller.
Basic equipment
of all High-Z CNC-milling and engraving machines:
Software ConstruCAM-3D ( from S-720 and S-400/T ) included
To use the software CAD CAM ConstruCAM in full screen, you need
the milling software version WIN PCNC Economy upward
Contact free reference switch and emergency stop button as well as
22mm thick linear guide ways and individually adapted screw nuts
------------------------------------------------------------------
--------------
Equipment / Productdetails:
oDrive : 4 stepping motor by Nanotec with 1600 steps/rev
(1/8 Step)
o2 motors for constant tension and compression during
milling operation on X-Axis
oFeed through of long workpieces
possible, because there's no belt drive at the end of the X-axle
oGuide ways X and Y axle 22 mm / Z Axis 16mm, grinded and with
61hrc hardened surface
oBall bearings at both sides of trapezium
spindles Tr. 12x3 mm flank lead
oTraverse speed of rapid feed:
max. 3000 mm/min
oTechnical resolution: 0,00187 mm ( 1/8 Schritt )
oReversal error max.: +/- 30µm ( 0,03mm )
oTable size /
clamping area: 730 x 400 mm
oTraverse Paths: X=400 mm; Y=300 mm;
Z= 110 mm
oReference- and limit switch on all axes
oDouble
safety emergency stop button
oEnergy chain for clean cabling
oTotal dinemsions incl motors: L x W x H = appr. 730 x 520 x 500mm
oMilling Motor anchorage: Euroneck Ø43mm
oincl. Software WIN
PCNC Light (optional WIN PCNC Economy, USB or professional)
oModular frame for universal application
oWeight appr. 31 kg
oComplete machine Includet 4 driver microstep controller 4x 3,5
Ampere
oAn approx. 30-minute long introduction during pick up
and an unlimted telephone support are included.
oAn approx. 2
hours long introduction and an installation of software on your
brought note book/ PC as well as a explanation of fundamental terms of
Corel Draw etc. possible, too.
------------------------------------------------------------------
--------------
Technical data contained in the
price TÜV-certified control system, tailored to the CNC milling
machine / CNC engraving machine:
o 4-Channel
Stepper motor -CNC-Controller with actual SMD-Technology
o
Main voltage 115 - 240 Volt / 47 - 63 Hz.
o Motor current 4 x
3,5 Ampere
o Microstep controller Resolution 1/10-Step / 2000
Steps/Rev.
o 4 C41144965 Connections for 4 brushless Motor /
Stepper motor
o Connection with parallel port and Software
WIN PCNC Light, Economy or USB with WIN PCNC USB or
Profi
version. ( Also possible:MACH3, USBCNC, NC-Easy LINUX EMC and LINUX
CNC and much other
stepper driver software.)
o
"Sleep-Function" for controlling current down
o Oszillation
motor-Connection 24 Volt by PWM controllable ( for example: Tangential
knife ) or
24 Volt constant for motor Break by ST-plug
o
2 relais for maximum 1200 Watt by Software switchable (up from WIN
PCNC Light), 230 Volt,
max. 6,0 A / Plug (for example Air
compressor, cooling, exhaust, dust extraction).
o 0 - 10 Volt
for connecting a HF converter for an high frequency spindle
o 12
Status-LEDs for monitoring all important function (Power, Toggle,
Move, X, Y, Z, C; Overheat,
Emergency stop, Relais: Spindle
/ Cooling, Short Circuit)
o Connection possibility of 4 end-
or. Reference switches and one Emergency Stop switch
o Motor
connection by D-Sub 9-pin. (C-Axis: 15-pin.)
o Emergency-Stop
Switch
o Overheating protection
o Short circuit
protection
------------------------------------------------------------------
--------------
fresadora fresatrice fraiseuse
Jyrsintae fraisage machin Freesmachine Frezesanas masina frezavimo
masinos ? Frezarka Freza Fraesmaskin Frézovací stroj Frézka ?; New
ready for operation
seller offer No. resale 67805460
|