| Description: |
D-CNC ROUTER MILLING FREESMACHINE BOOR CNC-STEP High-Z S-1000
Specifications / Technical Data S-1000
CNC-Router and
CNC-Engraver
This is the
biggest machine of our High-Z cnc-router series. With external
dimensions of approx. 1350x800mm it is still very handy.
With the High-Z 3D-cnc-routers you purchase an allround
talent in TÜV-certified quality. If you want to clampand fix complex
workpieces on the worksurface, or, or, or clamp work-pieces in a high
bench vise (the cnc-machine sits on a frame-construction, is driven by
2 motors and therefore allows to be positioned above a piece to be
processed).
Or if you simply want to do engraving-
or drillingjobs.you can work on a flat surface, with a pieces of sheet
MDF fixed to it. Plane it once and you will be able to work with a
precision of +-0,02 mm depth.
All cnc-machines are
being delivered with black energy-chains on all axis, which allows a
better cabling management. Also, all cnc-milling machines are equipped
with an emergency stop button. An additional emergency stop you find
in front of the controller.
Basic
equipment of all High-Z CNC-milling machines:
Software
ConstruCAM-3D limited ( from S-720 and S-400/T ) included
To
use the software CAD CAM ConstruCAM in full screen, you need the
milling software version WIN PCNC Economy upward
Contact free reference switch and emergency stop button as well as
22mm thick linear guide ways and individually adapted screw nuts
------------------------------------------------------------------
--------------
Equipment / Productdetails:
oDrive : 4 stepping motor by Nanotec with 1600
steps/rev (1/8 Step)
o2 motors for constant tension and
compression during milling operation on X-Axis
oFeed through of
long workpieces possible, because there's no belt drive at the end of
the X-axle
oGuide ways X and Y axle 22 mm / Z Axis 16mm,
grinded and with 61hrc hardened surface
oBall bearings at both
sides of trapezium spindles Tr. 12x3 mm flank lead
oTraverse speed
of rapid feed: max. 2000 mm/min
oTechnical resolution: 0,00187 mm
( 1/8 Schritt )
oReversal error max.: +/- 30µm ( 0,03mm )
oTable size / clamping area: 1330 x 680 mm
oTraverse Paths:
X=1000 mm; Y=600 mm; Z= 110 mm
oReference- and limit switch on all
axes
oDouble safety emergency stop button
oEnergy chain for
clean cabling
oTotal dinemsions incl motors: L x W x H = appr.
1350 x 840 x 500mm
oMilling Motor anchorage: Euroneck Ø43mm
oincl. Software WIN PCNC Light (optional WIN PCNC Economy, USB or
professional)
oincl. Software ConstruCAM-3D limited (
recommended sell price full version 1902.81 EUR)
oModular
frame for universal application
oWeight appr. 51 kg
oComplete
machine Includet 4 driver microstep controller 4 x 3,5 Ampere
oAn approx. 30-minute long introduction during pick up and an
unlimted telephone support are included.
oAn approx. 2 hours
long introduction and an installation of software on your brought
note-book / PC as well as a explanation of fundamental terms of Corel
Draw etc. possible, too.
------------------------------------------------------------------
--------------
Technical data contained in the
price TÜV-certified control system, tailored to the CNC milling
machine / CNC engraving machine:
o 4-Channel
Stepper motor -CNC-Controller with actual SMD-Technology
o
Main voltage 115 - 240 Volt / 47 - 63 Hz.
o Motor current 4 x
3,5 Ampere
o Microstep C41244965 controller Resolution
1/10-Step / 2000 Steps/Rev.
o 4 Connections for 4 brushless
Motor / Stepper motor
o Connection with parallel port and
Software WIN PCNC Light, Economy or USB with WIN PCNC USB or
Profi version. ( Also possible:MACH3, USBCNC, NC-Easy LINUX EMC and
LINUX CNC and much other
stepper driver software.)
o "Sleep-Function" for controlling current down
o
Oszillation motor-Connection 24 Volt by PWM controllable ( for
example: Tangential knife ) or
24 Volt constant for motor Break
by ST-plug
o 2 relais for maximum 1200 Watt by Software
switchable (up from WIN PCNC Light), 230 Volt,
max. 6,0 A / Plug
(for example Air compressor, cooling, exhaust, dust extraction).
o 0 - 10 Volt for connecting a HF converter for an high frequency
spindle
o 12 Status-LEDs for monitoring all important function
(Power, Toggle, Move, X, Y, Z, C; Overheat,
Emergency stop,
Relais: Spindle / Cooling, Short Circuit)
o Connection
possibility of 4 end- or. Reference switches and one Emergency Stop
switch
o Motor connection by D-Sub 9-pin. (C-Axis:
15-pin.)
o Emergency-Stop Switch
o Overheating
protection
o Short circuit protection
------------------------------------------------------------------
--------------
fresadora fresatrice fraiseuse
Jyrsintae fraisage machin Freesmachine Frezesanas masina frezavimo
masinos ? Frezarka Freza Fraesmaskin Frézovací stroj Frézka ?; New
ready for operation
seller offer No. resale 67805421
|