We offer Adsorption dryer 2 Kaeser DC 75 E Bj. 2016 6-16 bar Bid 1-3 The system is part of a compressed air system in a production hall. It is used built in 2016, and fully functional, in very good condition and is offered - due to restructuring of the use of the hall at our customer. The display will continue to be updated specifications: - Manufacturer: Kaeser Coburg - Model: Adsorption Dryer DC 75 with 2 desiccant containers Bj:2015 - Volume: 133 l - Filling weight: 100 kg - Adsorption center: Activated aluminum oxide Al2O2g - P0 & PS 0/16 bar - TO -10/+66 °C - TS +70°C - PT 26.1 bar - Year of construction: 2016 - Machine No.: 9,5486,20010-1038 - Operating hou ...

We offer Adsorption dryer 1 Kaeser DC 75 E Bj. 2016 6-16 bar Bid 1-5 The system is part of a compressed air system in a production hall. It is used. Built in 2016, and fully functional in very good condition and is offered - due to the restructuring of the use of the hall at our customer. The compressed air tank is not part of the offer. But it is also sold individually or sold with the system. specifications: - Manufacturer: Kaeser Coburg - Model: Adsorption dryer DC 75e with 2 desiccant containers Bj:2015 - Volume: 133 l - Filling weight: 100 kg - Adsorption agent: Activated aluminum oxide Al2O2 - P0 & PS 0/16 bar - TO -10/+66 °C - TS +70°C - PT 26.1 bar - Year ...

We offer Kaeser compressed air system consisting of 2x adsorption dryer DC 75E, compressed air tank 3000 l, piping with ultrafilter, compressed air management system Sigma, oil-water separation system & control cabinet The compressed air system was used to supply compressed air to a production hall. It was built or extended from 1995-2016 and is fully functional, in good condition and is offered for sale by our customer due to the restructuring of the use of the hall. The screw adapter is sold. 1. Screw compressor Kaeser CS 121 75 kW 2, 2x Adsorption Dryer Kaeser DC 75 E Bj. 2016 6-16 bar 3. Compressed air tank flamco STAG 3000 l 16 bar Bj 1995 704 kg 4.Piping with ultrafilter ...

Waldrich-Coburg leadership roads and surfaces sanding machine type: 0-15 SNC 2520 X/3 m Max.-Schleiflaenge: 3420 mms Max.-Schleifbreite: 1450 mms Max.-working height: 1005 mms Aufspannflaeche length: 3000 mms Aufspannflaeche width: 1250 mms accessories: -table fine adjustment -Papierbandfilter-Anlage -Schipmke-Haan DK150 V - back chill arrangement surface need: L=11,8m B=4,9m H=4,7m weight: 29.4 to . their prize image we await with pleasure. OTHER: the machine still stands live and can be visited any time.

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Distance between uprights: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Table length: 8000 mm Table width: 2800 mm Travels: Y axis: 9000 mm Z axis: 1250 mm W axis: 2200 mm Distance table to spindle max.: 2806 mm Distance between columns: 3200 mm Table load max.: 64000 kg Taper in spindle: 60 ISO Spindle speeds: number (steps): 16 from: 20 rpm up to: 600 rpm Feeds: X axis from: 5 mm/min up to: 3000 mm/min Y axis from: 5 mm/min up to: 3000 mm/min Z axis from: 5 mm/min up to: 2000 mm/min W axis from: 5 mm/min up to: 750 mm/min Creep speeds: X axis: 5 - 3000 mm/min Y axis: 5 - 3000 mm/ ...

x-travel: 9700 mm y-travel: 3500 mm z-travel: 640 mm w-axis: 3000 mm Control: Siemens type: 840D PL spindle diameter: 200 mm Spindle capacity: 85 Kw surface area: 9000x2800 mm Table load: 40000 kg high speed spindle taper ISO: 50 chip conveyor: coolant: total power requirement: kW weight of the machine ca.: 193,8 t dimensions of the machine ca.: 22,4x10,2x8,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 17700 mm y-travel: 4755 mm z-travel: 800 mm milling width: 3450 mm distance table - vertical milling spindle: 3682 mm table height over floor: 500 mm spindle diameter in front bearing: 200 mm turning speed range: 12 - 450 U/min tool taper: ISO 60 axial adjustment of the spindle slide: 800 mm creep feed: 5 und 50 mm/min feed stepless: 10 - 3000 mm/min cross adjustment of cross beam milling head: 4745 rapid traverse: 2 m/min creep feed: 3 und 30 mm/min feed stepless: 6 - 2000 mm/min rapid traverse: 2 m/min creep feed: 3 und 30 mm/min feed stepless: 6 - 2000 mm/min vertical adjustment of cross beam: 3682 mm rapid traverse: 1,5 m/min creep feed: 1,25 und 12,5 mm/min feed stepless: 5 -  ...

CNC Gantry Type Milling Machine for extra large workpieces. Manufacturer Waldrich Coburg. Model S 22-10 GM 500 NC/16 m. Year 1989. Overhauled/Modernised/Retrofitted 2008. Control Siemens 840D control retrofitted. Table size 15000 x 5000 mm. Table load max. 15000 kg/m². Distance between the columns: With column covers 5800 mm. Without column covers 6000 mm. Distance spindle to table max. 5000 mm. Travels: Gantry longitudinal travel X 16000 mm. Saddle cross travel Y 6800 mm. Milling ram vertical travel Z 2000 mm. Crossrail vertical travel W 3400 mm. Milling spindle Ø front 200 mm. Spindle motor rating 150 KW. Spindle speed range 6 - 750 rpm. Gear steps 2. Torque max.  ...

grinding length: 8400 mm grinding width: 1450 mm workpiece height: 1250 mm surface area: 8000 x 1250 mm table height over floor: 920 mm distance between columns: 1470 mm workpiece weight max.: 59700 kg weight of the machine ca.: 59,7 t dimensions of the machine ca.: 22 x 5 x 5 m Adjustment ranges: -Crossbeam, vertical 1250 mm -Grinding support, horizontal 3100 mm Adjustment speeds: -Machine table (X-axis) infinitely variable 1-45 m/min Table creep speed 5 m/min -Grinding support, horizontal (Y-axis) Rapid traverse 3000 mm/min Feed, step 0.001-0.099 mm Feed rate, continuous 100-3000 mm/min Creep speed 18+1 mm/min Tip infeed 0.001-0.019 mm -Crossbeam (W-ax ...

Upper support, cross support, cross table, cross slide table -Upper support comes from a Waldrich Coburg portal milling machine type: 12 D 3232-550 HL -Table surface: mm -Travel: x 350 mm/y 220 mm -Dimensions: 1380/1000/H800 mm -Weight: 800 kg ...

• more information