We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
complete screw and barrel dia. 45 mm for Battenfeld /1000 injection moulding machine is good condition ...
Battenfeld BA 1000/200 CDC Closing unit Clamping force [kN] 1000 Dimensions of mounting plates (hxv) [mm] 640 x 590 Clearance between columns (hxv) [mm] 370 x 420 Min./max. mold height [mm] min 250 Maximum opening width [mm] 725 Injection unit Screw diameter [mm] 40 Injection volume [cm3] 175.9 Injection weight [g] 160 Injection pressure [bar] 1137 Electrical and hydraulic equipment Rated power of the pump motor [kW] 11.2 Heater power [kW] 7.88 Dimensions and weight Net weight with control cabinet [t] 4.3 Dimensions (L x W x H) [m] 4.4 x 1.8 x 1.8
Description: serial number: 25883 operating hours: approx. 86586 hrs. closing unit: closing force: ,1000 kN dimensions of clamping plates: ,640 x 590 mm clearance between columns: 370 x 420 mm min./max. mould height: ,min 250 mm max. opening width: ,725 mm Injection unit: screw diameter: ,40 mm injection volume: ,175.9 cm3 injection weight: ,160 g injection pressure: ,1137 bar electric-hydraulic equipment: pump motor nominal power: ,11.2 kW heater power: , ,heated 7.88 kW Approx. Onsite Dimension. (l x w x h): 4,400 x 1,800 x 1,800 mm, weight approx.: 4,400 kg
Clamping force: 1000kN, tie bar distance: 420mm/420mm, min. installation height: 250mm, max. opening stroke: 750mm, screw diameter: 40mm, injection volume: 226.5cm³, injection weight PE/PS: 206g/161g, injection pressure: 2164bar. Dimensions X/Y/Z: approx. 4500mm/1500mm/2000mm, weight: approx. 4700kg, control: Unilog 4000B, operating hours: 99295h. Including Euro package, ejector plate safety device, AK+ screw cylinder and storage cassette with 21 slots. Documentation available. On-site inspection is possible.
The BATTENFELD BA 600 CDC injection molding machine was built in Austria in 2002. It is equipped with Unilog B4 control. It has a closing force of 600 kN forms. The screw diameter is 33 mm and the injection volume is 99 cm3. The machine has plates for mounting injection molds with dimensions of 511 x 511 mm, and the clearance between the columns is 320 x 320 mm. The injection molding machine is equipped with a receiving robot, hot runners, a conveyor belt for collecting moldings, four pillows, a string of cores and technical documentation. Technical parameters of the BATTENFELD BA 600 CDC injection molding machine – control: Unilog B4 – dimensions of tool plates: 511 x 511 mm – c ...
- CNC controller: UNILOG 4000 - screw diameter: 50 mm - mold clamping force: 150 t (1500 kN) - mold opening force: 8.9 t (89 kN) - screw stroke: 180 mm - injection weight: 322 g - injection volume: 354 cm3 - injection pressure: 1732 bar - plasticization efficiency: 58 g/s - dimensions of mold mounting plates: 740 x 740 mm - minimum form height: 250 mm - mold opening stroke: 650 mm - maximum clearance between mounting plates: 900 mm - clearance between columns: 500 x 500 mm - ejector stroke: 160 mm - ejector force: 39 kN - injection nozzle stroke: 400 mm - pressure force of the injection nozzle: 99 kN - heating power: 11.2 kW - number of heating zones: 1+3 - hydraulic work ...
Manufacturer: Battenfeld Type: BA 1000/525 TM Built: 2002 Control: Unilog B4 Closing force: 1000 kN Closing type: Knee lever Tie bar ratio: 420 mm x 420 mm Plate size: 640 mm x 640 mm Tool installation height: min 200 mm max 450 mm Opening distance: 330 mm Plate spacing max.: 830 mm Screw: 45 mm Lifting volume: 318 cc Spray weight PS: 291 gram PS Spray pressure: 1659 bar General Engine: 18.5 kW Heating: 13.8 kW Dimensions: 4.1 m x 1.3 m x 1.8 m Weight: 3900 kg Screen text: German / English Additional equipment Robot interface Core train: x2
warehouse no.: 502917 manufacturer: BATTENFELD type: BA 2700-1000+250V BK controller: UNILOG B4 year of construction: 2001 operation hours: 87827 h lamping force: 2700 kN distance between tie-bars h x v: 630 x 630 mm size of mould plates h x v: 900 x 1000 mm min. mould height: 250 mm max. mould height: 620 mm max. open daylight: 1270 mm opening stroke: 550 mm 1st horizontal injection unit: screw diameter: 55 mm swept volume: 522 ccm injection pressure: 1943 bar 2nd verticale injection unit: screw diameter:35mm swept volume: 134,7 cm³ injection pressure:1856 bar equipment included screen text german CEE-socket 16A core pulling hydraulically 4x machine witho ...
Injection unit Screw diameter: 50 mm Closing unit Closing force : 1800 kN Distance between tie-bars: 560 x 560 mm Other Commissioning: 1998 Tonnage: 180 ...
Used Battenfeld for sale, it has broblem with frequency converter the pump motor is not working as it should Battenfeld BK-T 2750/1000 Injection moulding machine ...