SOITAAB CNC plasma cutting with 2 generators Year = 1998 Plant size: center distance = 6000 mm. Useful length 24 thousand mm. Implant length = 26 thousand mm. Speed allowed with double motorization 20 thousand mm./ min. Operating speed up to 5000/6000 mm./min Numerical control = OSAI 10/310 TFT with 10.4 "color monitor Plasma generators No. 2. - Hyperterm HT 2000 System in operation, complete with bench and NOVA VIT fume extractor complete with star valve, direct discharge of cutting dust in standard big bags.

Machine type plasma inverter cutting machine Make Jess Type JETARC Plasma 30 i Supply voltage 1 x 230 volts Setting range 10 – 30 amps Duty cycle 35 % ED at 30 amps 60% ED at 25 amps 100% ED at 21 amps Current adjustment infinitely variable separation cut 10 mm quality cut 8 mm Cooling inverter by built-in fan Cooling burner compressed air-cooled, 50 ltr/min at 4.5 bar Portable assembly system version Fuse 16 Ampere Dimensions L x W x H 480 x 165 x 290 mm Weight with burner 11 kg Age 6 months Condition workshop tested, as new incl. UVV test protocol Scope of delivery plasma cutting system with the following accessories: 1 hand cutting  ...

Machine type plasma inverter cutting machine Make Jess Type JETARC Plasma 45 i Supply voltage 3 x 400 volts Adjustment range 10 – 45 amperes Duty cycle 80 % ED at 45 amps 100% ED at 40 amps Current adjustment infinitely variable separation cut 25 mm quality cut 12 mm Cooling inverter by built-in fan Cooling burner compressed air cooled at 90 ltr/min at 4.5 bar Portable assembly system version Fuse 16 Ampere Dimensions L x W x H 470 x 180 x 230 mm Weight with burner 13 kg Age 6 months Condition workshop tested, as new incl. UVV test protocol Scope of delivery plasma cutting system with the following accessories: 1 hand cutting torch FHT-EX ...

Plasma Flour Useful Size 6000 x 2500 Hypertherm HPR 130 Plasma Source Cutting steel from 1.5 mm to 30 mm Stainless steel cutting from 1.5 mm to 20 mm Complete cartridge fume extractor system Visible machine in operation.  ...

• more information

Plasma cutting machine TELWIN type Plasma Arc 65/1 Masch. Nr. C 10048-88 Year of construction 1988 Power 60 Amp. = 40 % ED 45 Amp. = 60 % ED 32 Amp. = 100 % ED Adjustment range 3 steps Hose pack length approx. 4.5 meters Compressed air connection approx. 6 bar Mains connection 380 Volt, 50 Hz 32 Amp. Plug Space required L x W x H 550 x 540 x 910 mm Weight approx. 90 kg Good condition; used

Offer Title: Wammes Machinery Manufacturer: Wammes Machinery GmbH Model: Plasma PC 1500/B Year of Manufacture: 2004 Technical Condition: Excellent State: Visible ...

• more information

Offer Title: Wammes Machinery Manufacturer: Wammes Machinery GmbH Model: Plasma PC 1500/B Year of Manufacture: 2004 Technical Condition: Excellent State: Visible ...

• more information

Offer Title: Wammes Machinery Manufacturer: Wammes Machinery GmbH Model: Plasma PC 1500/B Year of Manufacture: 2004 Technical Condition: Excellent State: Visible ...

• more information

2018 Tetra 100_LF-PC-c The systems can be used for reactive ion etching. This allows surfaces to be etched precisely, both chemically and physically. The height accuracy of the etching depends on the process, but can usually be controlled quite precisely down to the low two-digit to single-digit nanometer range. The system also offers the option of depositing polymerizing gases in the plasma as thin films. The height precision is of course also dependent on the process. Typical values here are also in the low two-digit nanometer range. - Operating hours Plasma system: 1004 - Glanded pump: 644 The corrosive gas-resistant system has a special vacuum chamber measuring 400 mm x 625 mm x 400 m ...

length: . mm height: . mm volt: U2 104 V ampere: I2 60 A volt: U1 400 V volt: U0 320 V ampere: I1 18-26 A Manufacturer number.32310819 EC/EN 60974-1 See type plate The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 500 machines in stockMore than 8,500 m² of storage space, crane capacity 70 tMore than 10,000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.