Code 4946 DESCRIPTION CNC Milling machine Make ABENE Model VHF – 3 TNC Serial No. 30038 Year 1984 Control Heidenhain TNC 150 B Table 1200 x 320 mm Longitude ( X – axis ) table 670 mm Vertical ( Y – axis ) table 450 mm Cross ( Z – axis ) table 250 mm Spindle gap 250 mm Spindle taper 40 ISO Speeds in 12 ranges 44 - 2000 rpm Feeds X-Y-Z 1 - 3000 mm/min Rapides 3,0 – 1,5 m/min Spindle motor 4,5 kW - 380 Volts Weight of machine 1600 kgs Accessories Univ. millinghead 3 x DRO Heidenhain Coolant ...

 ...

• more information

digital readout: HEIDENHAIN Number of axles: 3 St. x-travel: 760 mm y-travel: 350 mm z-travel: 500 mm table surface area: 1300x320 mm max. table loading capacity: 400 kg spindle head adjustment: 0-510 mm spindle cone ISO: 40 turning speed range: 55-3000 U/min feeds -stepless-: 0-3000/0-1200 mm/min feed motor: 3 kW total power requirement: 7.5 kW weight of the machine ca.: 2.3 t dimensions of the machine ca.: 2.2x1.8x2.0 m vice: jaw width: 300 mm Coolant installation: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Table length: 1530 mm Table width: 450 mm Longitudinal X: 650 mm Cross Y: 500 mm Vertical Z: 475 mm CNC Brand: Heidenhain CNC milling machineAbene - VHF-360 Ti  Vertical Milling Horizontal Milling Hardned and ground guide ways in all axes Heidnehain Scales in all 3 axes Ballscrews  in all 3 axes Mechanical & Electronical Handwheel All in one machine: 1. Combined manual 2. CNC with easy pre-programmed Cycles 3. Full CNC Machining 3-Axis X-Axis:         650mm Y-Axis:         500mm Z-Axis:         475mm Table Length:   1530mm Table Width:    450mm Table l ...

High speed milling machine built in Sweden 1999. Has only worked with soft materials so it is in great condition. ...

• more information

Stenner 3-head resaw line MHS 9 / VHF 36 with Rosens automation, Wood length 1200 - 3600 mm, Consisting of:, - Rosens infeed for wood packages with destacking system, - Rosens cross chain transport with automatic infeed, - Stenner 3-head resaw machine MHS 9, all 3 bandsaw with tilting heads max. 12°, - Stenner tilting resaw machine VHF 36, - Rosens outfeed system with cross transport, - Rosens single piece feeder, - Rosens automatic stacking system, - Rosens outfeed for wood packages

Maut CNC Milling Machine X:6000 y :1500 z : 2500 mm Heidenhain itcn 530 control unit Machine is in very good condition ...

• more information

cutting diameter: 120 mm saw blade diameter: 370 mm vice: 190 mm capacity 90 degrees: flat: 180 x 95 mm capacity 45 degrees: round: 110 mm capacity 45 degrees: flat: 125 x 95 mm capacity 60 degrees: round: 90,0 mm capacity 60 degrees: flat: 90 x 95 mm dimensions of saw-blade: 370 x 32 x 2,5 mm cutting speed: 15 - 150 m/min engine output: 3,0 kW weight: 640 kg range L-W-H: 900 x 1500 x 1910 mm New price ~ 16.000 euros Furnishing : - semi-automatic vertical metal circular saw - with miter adjustment 60 ° left / 45 ° right - swiveling control panel, front left - The saw head slides on linear double guides - pneumatic vice clamping - pneumatic saw blade feed, stepless - Infinitely variable sp ...

- workpiece diameter d680 - max workpiece length 3400 mm - max working lengths 2600 mm - with discs (d1100 mm) - required electric capacity 60 kW/h - under power, in use  ...

• more information

MAKE CHIRON MODEL MILL 800 5 axis 5 axis machininng center (milling/turning from bar) Under power in our warehouse in Gussago BS Italy Mimu Machine tools CNC Fanuc 18iMBS (5 simoultaneous axis 1) X, Y, Z (mm) 800 – 500 - 550 Rapids (Highspeed) 60 m/min Swivelling head CNC controlled (B axis) +/- 100° Turning spindle Peiseler Milling spindle 12.000 giri / 140 Nm (v nota 2) Tools 65 Tool type HSK-A 63 DIN 69893 Tool-change time 1,5 sec (v nota 3) Table 1400x500 Max table load 1200 kgs 90fjsieew Coolant through spindle 70 bar (see note 4) CNC controlled clamping/rotating unit for 6th face machining (v. nota 5) Pressurised linear encoders Swarf conveyor Renishaw-ready Y.O.M. 2006 Weight  ...