used press container Manufacturer: AVERMANN Type: MPC 10 Year of construction:? specifications: Pressing force: 38 t Drive power: 5.5 kW ? Capacity: 10 m³ Machine weight: 3,000 kg  ...

• more information

Table top size 8000 x 3500 mm, 5 x Bosch surface vibrators (separately controllable), Accessories: Magnets for shuttering on steel table, Attention: Special transport! 8500 x 3800 x 1100 mm 10000 kg unchecked loaded on truck ...

• more information

Table top size: approx. 12000 x 4000 mm, wooden table top, 9 x Bosch surface vibrators (separately controllable), Attention: Special transport! 12500 x 1200 x 4500 mm 150000 kg unchecked loaded on truck ...

• more information

automatic baling press Manufacturer: Avermann Type: AVOS 1810-5-74/100 Built: 2011 Engine hours: approx. 13,685 h technical data: Pressing force: 100 t Operating pressure 320 bar Filling opening: 1,800 x 1,000 mm Channel format: 1,100 x 700 (W x H) Drive power: 1 x 45 kW + 1 x 30 kW, Total connection power: 105 kW, Hedging: 200 A fully automatic binding 5-fold vertically, Throughput: at 30 kg/m3: approx. 9.0 t/hour at 50 kg/m3: approx. 13.0 t/hour at 100 kg/m3: approx. 20.0 t/hour Bale weights up to approx. 800 kg Oil tank volume: approx. 2,000 Ltr. Transport dimensions: approx. 11,200 x 2,355 x 2,700 mm Machine weight: approx.  ...

used conveyor belt Manufacturer: AVERMANN Type: Chain conveyor belt Year of construction: submitted technical data: Conveyor width: 1,800 mm Axle distance: approx. 10,000 mm Installation according to photos. Subject to errors in the technical data!  ...

• more information

Bale size (W x H) approx. 1,100 x 700 mm Bale weight approx550kg  ...

• more information

Year of Manufacture: 1998 Manufacturer: Avermann Application: Bulky Waste Sorting System Components: - Feed Conveyor - Inclined Conveyor - Connection Conveyor with Substructure - Magnetic Separator with Substructure - Catwalks - Stairs - Platforms - Emergency Descent Ladders - Sorting Conveyor - Sorting Cabin with Substructure - Heating and Ventilation System - Discharge Conveyor - Electrical Control - Dust Extraction System Find more here - / Contact us at -

Automatic Channel Baler Manufacturer: AVERMANN Type: AVOS 1211-15/50 Year of Make: 2015 Operating hours: approx. 2,850 h specifications: Press force: 50 t Specific pressing force: 6.49 kg/cm² Drive power: 15 kW Total connected load: 22 kW Throughput: at 35 kg/m³ bulk density: 2.7 t/h at 60 kg/m³ bulk density: 4.7 t/h at 100 kg/m³ bulk density: 6.5 t/h Filling opening: 1,200 x 1,100 mm Channel format: 1,100 x 700 mm Bale weight: up to approx. 400 kg Machine weight: approx. 8,500 kg

Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410 BS-22/50 Year of construction 2023 Pump operation hours 1,851 hours, as of July 24 Press power main press 70 t (a 70 tonne hydraulic cylinder is installed, special equipment) Specific press force 90,9 N/cm² (a 70 tonne hydraulic cylinder is installed, special equipment) Feed channel 1,400 x 1,000 mm Theoretic cycle time 13 sec Theoretic throughput capacity 266 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 22 kW Connected load 65 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 5,5 t/h bulk weight of 50 kg/cbm a ...

Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 20,536 hours, as of September 2024 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depend ...