Format range: max. 1100 mm min. 76 mm Equipment: Longitudinal seam, folding bottom, double margin, 4+6 point gluing, digital positioning system for format adjustment with 5000 memory locations, feeder with its own servo drive, 2x vacuum belts, tooth gauge and vibrator, new cutting alignment station right and left after the feeder with 2 additional central supports, primary crusher right with 43 mm belt / left up to 30 mm, additional center transport, vacuum adjustment, new servo overhaul folding Stöber, folding floor module with additional upper and lower Central transport, electronic top gluer HHS Xpect, 8 channel with 5 application heads, disc bottom gluing unit on the left, additio ...

Format range: max. 1100 mm, min. 126 mm Equipment: Longitudinal seam, folding bottom, double edge, 4-point gluing, electronic top gluer HHS X-tend², 16 channel with 6 application heads, disc bottom gluer left, Digital positioning system for format setting with memory locations, feeder with its own servo drive, tooth gauge and vibrator, blowing air, cutting alignment station to the right and left after the feeder with 2 additional central supports, primary crusher on the right with 43 mm belt / left up to 30 mm, additional center transport, vacuum adjustment, servo overhaul folding, folding floor module with additional upper and lower center transport, additional central transport in f ...

Format range: max. 1100 mm, min. 126 mm Equipment: Longitudinal seam, folding bottom, double edge, 4-point gluing, electronic top gluer HHS X-tend², 16 channel with 6 application heads, disc bottom gluer left, Digital positioning system for format setting with memory locations, feeder with its own servo drive, tooth gauge and vibrator, blowing air, cutting alignment station to the right and left after the feeder with 2 additional central supports, primary crusher on the right with 43 mm belt / left up to 30 mm, additional center transport, vacuum adjustment, servo overhaul folding, folding floor module with additional upper and lower center transport, additional central transport in f ...

CA 1962 Rotation slot - and die-cutting machine, strength of cardboard: 0,5-4 mm, thickness of the corrugated board: 3-7 mm, capacity (speed): until 3600 single cuts per hour, slots and booklet edge at side performed in a single pass, soil or cover can in one Operation individually, and with Zentralo cut twice, produced, additional delivery one cutting and creasing device can corrugated cardboard in a single punched, slotted, and grooved in one direction and cropped, automatic Waste ejection device, line 5301, Max: 1300x1200mm, min: 250 mm, 3600/hours

Manufacturer: Bobst Model: IRT.II. It is a rebuilt 2-color letterpress printing machine that uses flexographic clichés "I'm not going to be Year: 1966 Serial no. 5305 Automatic feeder Cliché execution: - Thickness: 4.75 mm, details without the thickness / thickness of the cliché adhesive tape - default: 2% Solid board and corrugated board Cardboard thickness maximum: 65 mm Minimum sheet format: 100 x 300 mm Sheet format maximum: 1,050 x 1,600 mm Working speed maximum 3,200 sheets / hour Manuals (English) available Hints: Colors: We haven't bought any more colors in a while. Inks for letterpress printing are not allowed dry oxidatively. (This should use inks from offset  ...

Min. size 350 x 500 mm / 920 x 1260 mm Speed of 5,000 c / h Quick clamping system in the stripping station Paper 80 g / m2 Cardboard max 2000 g / m2 16 heating zones Temperature 50 ° to 160 ° Autoplaten concept Stripping  ...

• more information

CUBE control system, 2 universal frame, Centre Line, Blanking station, Direct pallet loading, Automatic Universal feeder with non stop facility, Adjustable feed table with complement of infeed table furniture, Left and right hand side register lays, Bottom mounted gripper system, Double action stripping, Binder sheet insertion, hin plate with micro metric adjustment, tools for loading and transporting, Elevated 410 mm, MACHINE IS COMPLETELY WORKSHOP REFURBISHED !

Format range: 720 mm, min. 126 mm Equipment: Longitudinal seam, folding bottom, double edge, electronic upper glue with 2 application heads, disc glue on the left, Bobst CUBE control, vibrator & dental gauge on the feeder, Pre-crusher right and left, kicker, counter, digital position indicators, Folding floor module A2 with additional means transport above / below, additional means transport at the top / bottom of the fold, pneumatic Press belt. Overhaul 2022: cleaned, tested, painted, new Feeder and transport belts. Other: Machine can be visited by arrangement while running.

Computer touch screen for forwarding band control; temperature control Pull lay operator side Non-stop on feeder , Automatic Non-stop with carpet in delivery , No. 3 shafts for pushing forward the bands , ? Evaquation device for metal band with brush system Elevated 410 mm. Pivoting joggers for sample band removal , ?Standard equipment for controlling no. 6 bands., Band brake detection with 16 sensors . Pivoting joggers forsheet control . 1 Honeycomb frame. 7.500 speed/h , recently refurbished by Bobst, more details on request

Format range: 1450 mm, min. 290 mm Equipment: Longitudinal seam, folding bottom, double edge, 4 point bonding, electronic Upper glue unit HHS 16 channel with 2x 4 and 2x 2 application heads, High-pressure pump, vibrator & dental gauge on the feeder, Pre-crusher left, kicker, counter, 2x pneumatically ascendable Accessory holders, additional folding floor module with press, additional means transport in folding, pressing rollers after folding, fully automatic format adjustment, 2x alignment to the press belt, UV marking device, video surveillance on the press belt, pneumatic, clocked press belt. Overhaul 2022: cleaned, tested, painted and equipped with new feeder and transpor ...