Injection molding machines ARBURG 420C 1000-150/150/60 -3-Farben

machines for plastic / injection moulding machines / Injection molding machines

Spritzgussmaschinen-Handel Makies GmbH

Mr Frank Makies
31137 Hildesheim
Germany

  • 05121 675... phone

approved
dealer
verified user

RESALE member since 2010

item-No.: 152660693 Quantity: 1 Date: 26.11.2024
Year of manufacture: 2003 Operating hours: 20092 Location: Land-de Germany
Price:
Manufacturer: ARBURG
Model: 420C 1000-150/150/60 -3-Farben
Type of machine: Injection molding machines
Description: Injection molding machines ARBURG 420C 1000-150/150/60 -3-Farben

used machine

Injection moulding machine 3-colours
(horizontal /vertical/ and 3rd in L-position with protective enclosure)
with turntable

available now from our warehouse Hannover

Make: Arburg
Type: 420C 1000-150/150/60
Built in 2003

Control: Selogica
Hours: 20092 h

+Closing Unit+

Clamping force: 1000 kN / 1000 to.
Tie bar ratio: 420 x 420 mm
Plate size: 570 x 570 mm

Injection Unit 1 (150 unit)
Screw size: 15 mm (high-screw)
Pvlzwy
Spray volume: 17 cc
Spray weight: 15 gr.
Spray pressure: 2750 bar

Injection Unit 2 (150 unit
Screw size: 15 mm (high-screw)
Spray volume: 17 cc
Spray weight: 15 gr.
Spray pressure: 2750 bar

Injection Unit 3 (60 unit)
Screw size: 15 mm (high-screw)
Spray volume: 17 cc
Spray weight: 15 gr.
Spray pressure: 2080 bar

extras

1 ALLROUNDER 420 C 1000 - 150 / 150 / 60 fully hydraulic screw injection moulding machine
Tool clamping force 1000 kN Voltage 400 V / 50 Hz

1 Vertical injection unit instead of on the locking bars mounted on beams for 2nd injection unit, hand-operated, working position movable bar between 70 and 250 mm VE-404/02

1 Open nozzle 15 mm low-wear, without heating tape (1.SPE 150) VE-902/00

1 Technology level 2 - servo-controlled hydraulic system with two control pumps for controlled machine movements, with away-dependent, controlled target ramps. The structure of the tool holding force is programmable and regulated. The holding force is held servo-controlled via the second pump. The structure of the nozzle system force is programmable. The investment force is manually adjustable, the value is controlled. This technology level is a pre-ecipium for simultaneous movements of nozzle, ejector and optional core trains. Including equipment package for "Advanced Driving Movements". VE-132/03

1 Technology stage 3 hydraulic system with 3 control pumps for simultaneous movements of the main axes and for faster movements of the secondary axes. For the 2-K machines as hydraulic system for the 2nd injection unit (prerequisite is technology level 2, VE 132/03) VE-130/40

1 heating belt for open nozzle VE-320/00

1 Injection unit 150 for vertical injection into the tool separation during 2-K processing VE-136/02

1 Position-controlled screw with control valve on the injection unit, incl. controlled pressure, nozzle system force manually adjustable VE-561/20

1 Position-controlled screw with control valve for multi-component machines incl. controlled storage pressure, nozzle system force manually adjustable - for injection unit 2 VE-561/30
1 Injection unit 60 for horizontal injection into the tool separation as 3rd injection unit for multi-component processing (L-position) VE-906/00

1 to VE 906/00 Injection unit 60 in L-position: unit lowered by 70 mm, incl. special separation plane and full protection VE-907/00

1 plasticizing cylinder set 15 mm (without nozzle), with pre-loaded feed and pressure reducing valve, in high-wear-resistant version with sinter-metal backflow lock, i.e. highly wear- and corrosion-resistant for processing thermoplastics with highly abrasive or corrosive components and for high-temperature materials (L-position) VE-908/00

1 Open nozzle 15 mm low-wear, without heating tape (L-position) VE-909/00

1 nozzle tip with radius 15 (L-position) VE-910/00

1 heating belt for open nozzle (L-position) VE-911/00

1 Position-controlled screw for the third injection unit for 3-K machines, with control valve on the injection unit, controlled storage pressure and manually adjustable with nozzle system force (prerequisite is technology level 2) VE-918/00

1 Control extension for repressurization via hydraulic pressure VE-471/01

1 Electrical connection for pneumatic needle enclosing nozzle in the VE-317/00 tool

1 Electrical connection for pneumatic needle closing nozzle in the tool for third injection unit VE-913/00

1 to VE 317/00 and 913/00 "pneum. NVD in WKZ": 1 pneum. Control for nozzles in the mech tool. + electr.) includes 2 x 5/3 way valve incl. respective pressure setting; Attachment to mesh back, at the height of the fixed WKZ plate (as with machine 185.801) VE-914/00

1 Clamping plate set 420 with central injection position and centering diameter 125 mm VE-356/11

1 to VE 356/11 Clamping plate set: special bores in lelet. WKZ plate - for ejectors: 4x D35 H7 on hor. + vert. Center axis distance 100 mm each, standard. Ejector holes (distance 85 mm) remain -for guide ejector cross: holes offset from the center axis to the right (see sketch) VE-921/00

1 Extension of the locking bars to the corresponding increase of the minimum tool installation height to 350 mm, the opening path (stroke) remains unchanged, the lateral protective enclosure must be increased according to the safety level (VE 389/01), the tool closing area remains open upwards VE-357/35

1 Machine-related cooling circuits programmable VE-525/02

1 to VE 525/02 "mash. in z. cooling circuits": Cooling circuits with measuring tube VE-916/00

1 Basic equipment for additional cooling water distributors with separate inlet and outlet, hand-adjustable, with measuring tube for S41224506 this purpose: VE-514/00

1 - 5 free cooling circuits, connection DN 13 VE-514/05

1 1. Core pull control for simultaneous movements, the holding pressure is hand-adjustable - in the case of serial movements pressure and flow are programmable - at the simultaneous movements the pressure is hand-adjustable, the flow is load-dependent connections on movable tool plate, in machines with vertical clamping unit on the hydraulic block; the hydraulic cylinders and hoses are not included VE-382/02

1 Extension for the hydraulic rotary control to drive the ARBURG rotary unit, controlled, with brake ramps and programmable speeds VE-382/08

1 Hydraulically driven 3-station rotary unit for multi-component tools for attachment to the movable tool clamping plate, rotational movement 120 degrees or 180 degrees continuous, incl. adjustment, with 4 cooling circuits, ejector position at the bottom or rear, delivery is carried out with additional parts such as hydraulic hoses and limit switch VE-919/00

1 to VE 919 Rotary unit: in special version for ejecting in sub-circle 200, ejector possibility in upper or operating. (90°) Cavity, booked for ejector bolts D 24 VE-920/00

1 2. Core pull control for simultaneous movements, the holding pressure is programmable - in the serial movements pressure and flow are programmable - at the simultaneous movements the pressure is programmable, the flow is load-dependent connections on movable tool plate, in machines with vertical clamping unit on the hydraulic block; the hydraulic cylinders and hoses are not included in the scope of delivery (can be used in the S-series from T-2, in the C-series from T-2 servo-controlled) VE-382/13

1 to VE 382/13 Core pull control: core pull incl. twin check valve VE-912/00

1 ausw
1 to VE 572/00 Ejector Cross. in special version, adapted to movable WKZ plate, possibility to eject to 85 mm and 100 mm distance (upper or operating. (90°) cavity) incl. adapted shell coupling (without ejector bolt) VE-922/00

Etc.

fully functional cross for extra-middle ejection, in combination with 2-K rotation units, for max. 3 ejector bolts incl. 1 shell coupling, usable VE-572/00
seller offer No. resale 152660693
Machine in stock: Yes
Share this machine on Facebook:

Inquiry

Machinery dealer?

Please remit optionally

Send wanted inquiry?

(to all dealers for such a machine)

Copy to you?

(copy of your inquiry will be sent to your email address)

Save input data

(Save input data for further inquiries)

more Arburg 420C 1000-150/150/60 -3-Farben + similar Arburg-Model

2005 ARBURG420C 1000 - 250 VU 29500 EUR
2001 ARBURG420C-1000-350 13000 EUR
2002 ARBURG420C-1000-250 11500 EUR
2007 ARBURG420C 1000-290 GOLDEN
2006 ARBURG420C 1000-250
1999 ARBURG420C 1000-350
2006 ARBURG420C-1000-350 (227)
2007 ARBURG420C 1000-290
2002 ARBURG420C 1000-350
2007 ARBURG420C 1000-290

Price: sold Arburg 420C 1000-150/150/60 -3-Farben + similar Arburg-Model

2002 ARBURG420C 1000 - 250 VU 42500 GBP [Jun 2022]
2005 ARBURG420C 1000-350 16950 GBP [Nov 2023]
2005 ARBURG420C 1000-350 18500 GBP [Mar 2023]
2008 ARBURG420C 1000-290 22350 GBP [Jun 2023]
ARBURG420C 1000-350 21500 GBP [Jul 2020]
ARBURG420C 1000-290 6600 EUR [Sep 2023]
1998 ARBURG420C 1500-350 19000 EUR [Jun 2016]
ARBURG420C 800-250 16950 GBP [Jun 2022]
ARBURG420C 800-250 Allrounder 17750 £ [Apr 2019]
ARBURG420C 1300-250 24000 EUR [May 2015]
... see more Price Login