We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
Arburg Allrounder 320K 700-100 Parameter: Clamping force: 70 t Year of construction: 05/2004 Injection weight in horsepower: 65 g Injection unit: .../100 Screw diameter: 30 mm Spec. Spray pressure: 1390 bar Injection volume: 71 ccm Injection weight in horsepower: 65 g Hydr. Drive power: 11 kW Cylinder heating capacity: 5 kW Clamping unit: 700/... Clamping force:: 70 t Size of the clamping plates: 446 x 446 mm Lights tie bar distance: 320 x 320 mm Opening travel: 350 mm Max. plate spacing: 550 mm Ejector travel: 125 mm General information: Weight: 2250 kg Dimensions (m) LxWxH: 3.2 x 1.5 x 1.9 m Equipment: 1 x hydraulic core pull control 1 x pneumatic valve
Arburg 320K-700-100 (212) General information Item number: 212 Availability: In stock Year of construction: 2000 Brand: Arburg Specifications Spray weight: 29 g Clamping force: 700 kN Stand: Used Screw diameter: 20 mm Injection pressure: 2500 bar Tie bar spacing: 320 x 320 mm Clamping plate size: 476 x 476 mm Tool installation height min.: 200 mm Control: Selogica Language: German,Polish Power: 31 kW Hours: 88715 h Weight: 2170 kg Dimensions: 3.25 x 2 m Funnel: No
Injection Unit .../100 Screw diameter 30 mm Spec. Spray pressure 1390 bar Injection volume 71 cc Injection weight in hp 65 g Hydr. Power 16 kW Clamping unit 700/... Clamping force 70 t Size of the clamping plates 446 x 446 mm Lights spar spacing 320 x 320 mm Tool installation height 200 mm Opening way 350 mm Max. panel spacing 550 mm Ejector path 125 mm Weight 2250 kg Dimensions(m) LxWxH 3.2 1.5 x 1.9 m Year of construction 05/2004
Injection weight: 29 g Closing force: 700 kN State: Used Screw diameter: 20 Injection pressure: 2500 Column spacing: 320x320 Size of plates: 476x476 Min mold height: 200 Control type: Selogica Tongue: German,Polish Installed power: 31 Working hours: 88715 Libra: 2170 Dimensions: 3.25 x 2 Feed hopper: NO
Ejection stroke: 35mm, weight: 700kg. ...
Injection molding machine in very good condition, under the supervision of the manufacturers service since new. Included with the machine is a picker and a good/bad product metering device. The machine has German and Polish language preloaded. Short circuit force: 70T Auger diameter: 25mm Working area: 320 x 320 x 200-400 Control: Selogica Year of production: 2000 Motor: 11kW For sale 4 of the same machine. Price given for 1. Possibility to sell with additional tooling as in the last photo - Getech mill and chute. On request, it is possible to send videos of the operation of the machine.
Arburg 370S 700-100/100 / 2K machine / Operating hours: 33,544 in automatic mode / Very good technical condition Year of Make: 2009 Injection unit: Screw diameter: 30 mm Injection weight: 65 g Spray pressure: 1390 bar Dosing volume: 71 ccm Clamping unit: Clamping force: 70 t Tiebar spacing: 370x370 mm Size of the clamping plates: 510x510 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: 2K Machine Operating hours: 33,544 in automatic mode Euromap 67 Robot interface Air Valve x 5 Hydraulic core pull x 2 Control with hot runners Reinforced Injection Units - Bimetal Proportional valves on sprinkler units - precise ...
clamping force: 700 kN injection volume: 103 cm³ screw diameter: 30 mm platen size: 432 x 310 mm closing stroke: 650 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ...
Arburg Injection Moulding Machine Type: 520 C 2000-675 Control: Selogica Built: 1999 Closing unit Clamping force t: 220 Opening path mm: 900 Holm size mm: 520 x 520 Installation height min/max mm: 250 Plate size: 715 x 715 Spraying unit Screw diameter mm: 60 Spray weight gr: 427 Spray volume cm3: 508 Spray pressure bar: 1400 Dimensions and weights Dimensions LxWxH m: 5.6 x 1.7 x 2.2 Machine Weight Kg: 7050 Other - Clamping force increased to 220 KN - resistant plastification unit - 2x core pull - Robotinterface Euromap12
ARBURG injection moulding machine Type: 420 V 800-150-150 2Component, with turntable controller: SELOGICA year: 1998 Clamping unit Clamping force t Gap between 80 mm: 500 Holm dimension mm: 420 x 420 min/max height mm: 250 Plate size: 545 x 545 Injection unit Screw diameter mm: 25/25 Injection weight gr: 49/49 Injection volume cm m³: 54/54 Spray pressure bar: 2500 Dimensions and weights Dimensions Lxwxh m: 4.7 x 1.7 x 2.1 machine weight kg: 5000 Miscellaneous 2 Component with turntable (with turntable)