Arburg Allrounder 320K 700-100 Parameter: Clamping force: 70 t Year of construction: 05/2004 Injection weight in horsepower: 65 g Injection unit: .../100 Screw diameter: 30 mm Spec. Spray pressure: 1390 bar Injection volume: 71 ccm Injection weight in horsepower: 65 g Hydr. Drive power: 11 kW Cylinder heating capacity: 5 kW Clamping unit: 700/... Clamping force:: 70 t Size of the clamping plates: 446 x 446 mm Lights tie bar distance: 320 x 320 mm Opening travel: 350 mm Max. plate spacing: 550 mm Ejector travel: 125 mm General information: Weight: 2250 kg Dimensions (m) LxWxH: 3.2 x 1.5 x 1.9 m Equipment: 1 x hydraulic core pull control 1 x pneumatic valve

Arburg 320K-700-100 (212) General information Item number: 212 Availability: In stock Year of construction: 2000 Brand: Arburg Specifications Spray weight: 29 g Clamping force: 700 kN Stand: Used Screw diameter: 20 mm Injection pressure: 2500 bar Tie bar spacing: 320 x 320 mm Clamping plate size: 476 x 476 mm Tool installation height min.: 200 mm Control: Selogica Language: German,Polish Power: 31 kW Hours: 88715 h Weight: 2170 kg Dimensions: 3.25 x 2 m Funnel: No

Injection weight: 29 g Closing force: 700 kN State: Used Screw diameter: 20 Injection pressure: 2500 Column spacing: 320x320 Size of plates: 476x476 Min mold height: 200 Control type: Selogica Tongue: German,Polish Installed power: 31 Working hours: 88715 Libra: 2170 Dimensions: 3.25 x 2 Feed hopper: NO

Arburg 305 ECO 700-230 injection molding machine Press still in daily use a year ago. Cabinet overhauled. To be picked up on site; dismantling and craneage at buyers expense. ...

• more information

ARBURG 305 ECO 700-230 injection moulding machine Press still in daily use a year ago. Cabinet overhauled. To be picked up on site; dismantling and craneage at buyers expense. ...

• more information

Injection molding machine in very good condition, under the supervision of the manufacturers service since new. Included with the machine is a picker and a good/bad product metering device. The machine has German and Polish language preloaded. Short circuit force: 70T Auger diameter: 25mm Working area: 320 x 320 x 200-400 Control: Selogica Year of production: 2000 Motor: 11kW For sale 4 of the same machine. Price given for 1. Possibility to sell with additional tooling as in the last photo - Getech mill and chute. On request, it is possible to send videos of the operation of the machine.

Arburg 370S 700-100/100 / 2K machine / Operating hours: 33,544 in automatic mode / Very good technical condition Year of Make: 2009 Injection unit: Screw diameter: 30 mm Injection weight: 65 g Spray pressure: 1390 bar Dosing volume: 71 ccm Clamping unit: Clamping force: 70 t Tiebar spacing: 370x370 mm Size of the clamping plates: 510x510 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: 2K Machine Operating hours: 33,544 in automatic mode Euromap 67 Robot interface Air Valve x 5 Hydraulic core pull x 2 Control with hot runners Reinforced Injection Units - Bimetal Proportional valves on sprinkler units - precise ...

clamping force: 700 kN injection volume: 103 cm³ screw diameter: 30 mm platen size: 432 x 310 mm closing stroke: 650 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.  ...

• more information

Arburg Injection Moulding Machine Type: 520 C 2000-675 Control: Selogica Built: 1999 Closing unit Clamping force t: 220 Opening path mm: 900 Holm size mm: 520 x 520 Installation height min/max mm: 250 Plate size: 715 x 715 Spraying unit Screw diameter mm: 60 Spray weight gr: 427 Spray volume cm3: 508 Spray pressure bar: 1400 Dimensions and weights Dimensions LxWxH m: 5.6 x 1.7 x 2.2 Machine Weight Kg: 7050 Other - Clamping force increased to 220 KN - resistant plastification unit - 2x core pull - Robotinterface Euromap12

ARBURG injection moulding machine Type: 420 V 800-150-150 2Component, with turntable controller: SELOGICA year: 1998 Clamping unit Clamping force t Gap between 80 mm: 500 Holm dimension mm: 420 x 420 min/max height mm: 250 Plate size: 545 x 545 Injection unit Screw diameter mm: 25/25 Injection weight gr: 49/49 Injection volume cm m³: 54/54 Spray pressure bar: 2500 Dimensions and weights Dimensions Lxwxh m: 4.7 x 1.7 x 2.1 machine weight kg: 5000 Miscellaneous 2 Component with turntable (with turntable)