Max. clamping force: 500kN, opening stroke: 350mm, tool installation height: 200mm, heating output: 6.5kW, screw diameter: 40mm, weight: 2.33t, without documentation. ...

• more information

Closing force: 500kN, heating output: 4.9kW, connected load: 19.9kW, operational hours counter: 57,024h, with handling and conveyor belts, without dosing device. ...

• more information

Clamping force: 500kN, min. installation height: 200mm, max. drive-up distance: 550mm, barrel diameter: 25mm, max. screw volume: 47cm³, number of core pulls: 2. Available from Q4 2024. ...

• more information

Arburg 320C 500-100 / Excellent technical condition Year of manufacture: 10.2004 Injection unit: Screw diameter: 25 mm Injection weight: 45 g Spray pressure: 2000 bar Dosing volume: 49 ccm Clamping unit: Clamping force: 50 t Tiebar spacing: 320x320 mm Size of the clamping plates: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: The machine is in excellent technical condition and has been used to test injection molds Operating hours: 25,739 h in automatic mode Total number of operating hours: 30,661 h Hydraulic core pull x 1 Reinforced Injection Units – Bimetal Proportional valve on the injection unit – precise inje ...

Arburg 320C 500-250 Year of manufacture: 11.2004 Injection unit: Screw diameter: 35 mm Injection weight: 121 g Spray pressure: 1820 bar Dosing volume: 144 ccm Clamping unit: Clamping force: 50 t Tiebar spacing: 320x320 mm Size of the clamping plates: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap 12 Robot interface Air Valve x 1 Hydraulic core pull x 1 Hardened injection unit - Bimetal Metrics: Weight: 2330 kg Length/Width/Height: 3.41x1.47x1.99 m Drive: Pumps/motor: 15 kW Heating capacity: 6.5 kW Total power: 21.5 kW All offered machines are started by our service technicians before they are sol ...

Clamping force [kN] 500 Dimensions of mounting plates (hxv) [mm] 446 x 446 Clearance between columns (hxv) [mm] 320 x 320 injection unit Screw diameter [mm] 25 Injection weight [g] 45 Injection pressure [bar] 1550 Electric-hydraulic equipment Nominal power of the pump motor [kW] 15 Heater power [kW] 4.9 Dimensions and weight Net weight with control cabinet [t] 2.08 Dimensions (L x W x H) [m] 3.12 x 1.43 x 1.99

Introducing the Arburg Allrounder 320C 500-100 with ROBOT available on Exapro online marketplace: - Manufacturer: Arburg - Model: Allrounder 320C 500-100 - Year of Manufacture: 2001 - Clamping Force: 50 Ton - Distance Between Columns: 320x320 - Screw Diameter: 30 mm - Calculated Injection Volume: 70 - Min / Max Mold Thickness: 200 - Euromap: 500-100 - Moving Platen Stroke: 350 - Working Hours: 78,000 - Technical Condition: Good This efficient machine with a robot is ideal for various injection molding tasks. Dont miss the opportunity to enhance your production capabilities with this reliable equipment.

This Arburg 320C 600-250 injection moulding machine was manufactured in 1998. It features a clamping force of 60 tons, a screw diameter of 35 mm, and operates with a hydraulic drive system. The machine dimensions are approximately 4.5 m x 1.5 m x 2.0 m, weighing around 5,000 kg. Ideal for precision molding, the Arburg 320C 600-250 machine we have for sale is a robust addition to any production line. Contact us for further details regarding this injection moulding machine.

Arburg 320C 300-100 / Very good technical condition Year of Make: 2007 Injection unit: Screw diameter: 20 mm Injection weight: 26 g Spray pressure: 2500 bar Dosing volume: 31 ccm Clamping unit: Clamping force: 30 t Tiebar spacing: 320x320 mm Size of the clamping plates: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap 67 Robot interface Air Valve x 4 Hydraulic core pull x 2 Control with hot runners Hardened injection unit - Bimetal Proportional valve on the vertical injection unit – precise injection Original Tool Crane Metrics: Weight: 2250 kg Length/Width/Height: 3.42x1.48x1.99 m Drive: Pumps/mot ...

Arburg 320C 600-250 / Machine in very good technical condition Year of Make: 2001 Injection unit: Screw diameter: 35 mm Injection weight: 121 g Spray pressure: 1820 bar Dosing volume: 144 ccm Clamping unit: Clamping force: 60 t Tiebar spacing: 320x320 mm Size of the clamping plates: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Very good technical condition Machine has produced injection molded parts for the medical industry - pure production conditions Core train control Hardened injection unit - Bimetal Built-in sorting flap Metrics: Weight: 2330 kg Length/Width/Height: 3.65x1.48x1.99 m Drive: Pumps/motor: ...