Injection weight: 17 g Closing force: 400 kN State: Used Screw diameter: 18 Injection pressure: 2500 Column spacing: 270 x 270 Size of plates: 385x385 Min mold height: 225 Control type: Selogica Tongue: English,Other Installed power: 16.4 Libra: 2040 Dimensions: 1.3 x 3.1 Feed hopper: NO Core String: Yes Robot socket: Yes Air valve: Yes Heating control for molds: Yes

Arburg 270S 400-70 / Very good technical condition Year of Make: 2008 Injection unit: Screw diameter: 22 mm Injection weight: 31 g Spray pressure: 2000 bar Dosing volume: 34 ccm Clamping unit : Clamping force: 40 t Tiebar spacing: 270x270 mm Size of the clamping plates: 380x380 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Euromap 67 Robot interface Air Valve x 2 Hydraulic core pull x 1 Control with hot runners x 6 Hardened injection unit - Bimetal Built-in conveyor belt and sorting flap Metrics: Weight: 2040 kg Length/Width/Height: 3.35x1.24x1.83 m Drive: Pumps/motor: 11 kW Heating capacity: 4.1 kW ...

Operational hours counter: 62,699h, with documentation, without accessories. ...

• more information

We are a company dealing with international trade in used injection molding machines and peripherals. We specialize in the transport of machines up to 4500t clamping force and the relocation of industrial plants throughout Europe. Offered: Arburg Allrounder 270S 350-60 Clamping force: 35 t Production year: 1999 Injection weight: 17 (PS) g Injection unit: .../60 Screw diameter: 18 mm Specific injection pressure: 2500 bar Injection volume: 20 ccm Injection weight: 17 (PS) g L/D ratio of screw: 24.5 Tool closure system: 350/... Clamping force: 35 t Distance between columns: 270 x 270 mm Ejector force: 30 kN Opening distance: 350 mm Maximum plate distance: 525mm Ejector ...

Arburg 270S 250-60 U / Universal machine Year of Make: 2001 Injection unit: Screw diameter: 18 mm Injection weight: 17 g Spray pressure: 2500 bar Dosing volume: 20 ccm Clamping unit: Clamping force: 25 t Tiebar spacing: 270x270 mm Size of the clamping plates: 400x400 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Universal machine, injection unit and clamping unit can work horizontally or vertically Air Valve x 2 Core train control Control with hot runners Hardened injection unit - Bimetal Proportional valve on the injection unit – precise injection Metrics: Weight: 2100 kg Length/Width/Height: 2.89x1.11x1.85 m Dri ...

Clamping force: 250kN, heating output: 2.7kW, connected load: 69kW, operational hours counter: 97,696h, with documentation, without accessories, the hydraulic control valve is defective on the closing side. ...

• more information

Installation height min./max.: 200mm/550mm, opening stroke: 350mm, closing force: 350kN, screw diameter: 20mm, distance between tie bars: 270mm, max. injection volume: 31cm³, operating hours: 61737h. Documentation available. On-site inspection is possible. ...

• more information

Arburg 270C-400-250 + robot Multilift and conveyor belt (3) Year of production: 2004 TECHNICAL DATA Screw Dia [mm]: 30 Shot Weight [g]: 97 Injection Pressure [bar]: 2470 Clamping Force [kN]: 400 Tie Bar Distance [mm]: 270x270 Platen Size [mm]: 446x446 Mould Height min. [mm]: 200 CONTROL Type of Controls: Selogica Monitor: Yes Control Cabinet: Yes Language: German OTHER Power [kW]: 18,4 Workinghours [h]: 75000 Dimensions [m]: 4 x 2,2 Weight [kg]: 1980kg + 300kg robot CR - CORE PULL R - ROBOT

Manufacturer: Arburg Type: 270C 400 - 100 Built: 2000 Control: Selogica Closing force: 400 kN Closing type: Hydraulic Tie bar distance: 270 mm x 270 mm Plate size: 446 mm x 446 mm Tool installation height: min 200 mm Opening distance: 350 mm Plate spacing max.: 550 mm Screw: 30 mm Lifting volume: 70 cc / 64 gram hp Spray pressure: 1550 bar General Engine: 11 kW Heating: 5.9 kW Dimensions: 3.42 m x 1.5 m x 1.7m Weight: 1980 kg Screen text: German Additional equipment Core train: x1 Robot interface

Manufacturer: Arburg Type: 270 C 400 - 100 Year of construction: 1998 Control: Selogica Closing force: 400 kN Closing type: Hydraulic Tie bar spacing: 270 mm x 270 mm Plate size: 446 mm x 446 mm Tool height: min 200 mm Opening distance: 350 mm Plate spacing max.: 550 mm Screw: 30 mm Stroke volume: 70 ccm / 64 gram HP Injection pressure: 1550 bar general Engine: 11 kW Heating: 5.9 kW Dimensions: 3.42 m x 1.5 m x 1.7m Weight: 1980 kg Screen text: German Additional equipment Core train: x1