sheet width: 3050 mm plate thickness: 12 mm distance between columns: 3100 mm table height over floor: 900 mm cutting angle adjustment: 0,5 - 3 ° no. of strokes: 6 - 13 Hub/min back stop - adjustable: 1000 mm down holder: 18 St oil volume: 350 l total power requirement: 22,5 kW weight of the machine ca.: 8 t dimensions of machine L x W x H: 3,96 x 2,38 x 2,22 m Accessories: electr. back gauge, spare knives The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3050 mm plate thickness: 12 mm rear stop: 1000 mm cutting angle: 0,5 - 3,0 ° down holder: 18 Stk no. of strokes: 7 - 14 Hub/min oil volume: 350 l total power requirement: 22,5 kW dimensions of the machine ca.: 4200 x 2000 x 2250 mm weight: 8500 kg Furnishing: - electric back gauge 750 mm - front support plates with ball rollers - Light barrier behind the machine - Hydraulic cutting adjustment - Cutting gap regulation via handwheel - LED cutting edge lighting - 1x side stop with scale 1500 mm - 1x freely movable foot switch - Operation manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3050 mm plate thickness: 12 mm distance between columns: 3100 mm : mm cutting gap adjustment: ja mm connected load: 22,5# kW weight of the machine ca.: 8,5 t dimensions of the machine ca.: 4,2x 2,0 x 2,25 m Hydraulic guillotine shears with - manual back stop - cutting angle adjustment - cutting gap adjustment - side stop The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic guillotine shear model Atlantic 3012 very good condition. - Year of manufacture - 1990. - Length of the cut sheet - 3000mm. - Max cutting thickness 12mm - The machine is equipped with an automatic bumper. - The machine has 1 set of spare original knives. - Weight 8000 kg. ...

• more information

sheet width: 3050 mm plate thickness: 6 mm distance between columns: 3100 mm back stop - adjustable: 750 mm cutting angle adjustment: 0,5 - 3,0 ° no. of strokes: 9 - 17 Hub/min table height over floor: 775 mm total power requirement: 7,5 kW weight of the machine ca.: 4,5 t dimensions of machine L x W x H: 3,75 x 1,65 x 1,7 m Accessories: electr. back stop, angle front stop, table extensions, spare knives The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3050 mm plate thickness: 6.0 mm thickness at Niro-steel: 4.0 mm cutting angle: 0.5 - 3.0 ° down holder: 18 Stück no. of strokes: 9 / 14 Hub/min back stop - adjustable: max. 750 mm Control: konv. engine output: 10.0 kW weight: 4800 kg range L-W-H: 3750 x 1600 x 2450 mm maintained condition () Furnishing: - electro-hydraulic / slide-guided sheet metal shears - front control panel, left - easy to use - with electro-hydraulic cutting angle adjustment - with manual cutting gap adjustment, from the rear - electro-motorized back gauge 10-750 mm - with analogue position display + handwheel for fine adjustment - 1x robust side stop - 1x freely movable foot switch - front finger/encroa ...

sheet width: 3050 mm plate thickness: 6 mm rear stop: 750 mm cutting angle: 0,5 - 3,0 ° down holder: 18 Stk no. of strokes: 9 - 17 Hub/min oil volume: 200 l total power requirement: 7,5 kW dimensions of the machine ca.: 3750 x 1650 x 1700 mm weight: 4500 kg Furnishing: - electric back gauge 750 mm - front support plates with ball rollers - Light barrier behind the machine - Hydraulic cutting adjustment - Cutting gap regulation via handwheel - LED cutting edge lighting - 1x side stop with scale 1500 mm - 1x freely movable foot switch - Operation manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Side stop 1000 mm, motor backgauge, with fine adjustment by handwheel, foot switch Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Sheet width: 3000 mm Sheet thickness steel: 6.0 mm Sheet thickness aluminium: aluminium 4.0 mm Sheet thickness stainless steel: 4.0 mm Colour: grey Total power requirement: 32 A Machine weight: 4500 kg Dimensions: 3800 x 1650 x 1600 mm Cutting gap adjustment manual Holddown autom.: 18 pieces Stroke rates per minute: 17/9 stroke/min with cutting angle adjustment without projection Adjustable back gauge: 750 mm Machine number: 802918

sheet width: 2050 mm plate thickness: 6.0 mm thickness at Niro-steel: 4.0 mm cutting angle: 0.5 - 3.0 ° down holder: 13 Stück no. of strokes: 12 - 20 Hub/min back stop - adjustable: max. 750 mm Control: konv. engine output: 7.5 kW weight: 3500 kg range L-W-H: 2680 x 2000 x 1570 mm Equipment: - electro-hydraulic / slide-guided sheet metal shears - front control panel, left - easy to use - with electro-hydraulic cutting angle adjustment - with manual cutting gap adjustment, from the rear - electro-motorized rear stop 10.0 - 750 mm with analog position display + handwheel for fine adjustment - 1x robust, extra-long side stop including mm scale - 1x freely movable foot switch - front finger/i ...

sheet width: 3050 mm plate thickness: 6 mm rear stop: 750 mm cutting angle: 0,5 - 3,0 ° down holder: 18 Stk no. of strokes: 9 - 17 Hub/min oil volume: 200 l total power requirement: 7,5 kW dimensions of the machine ca.: 3750 x 1650 x 1700 mm weight: 4500 kg Furnishing: - electric back gauge 750 mm - front support plates with ball rollers - Light barrier behind the machine - Hydraulic cutting adjustment - Cutting gap regulation via handwheel - LED cutting edge lighting - 1x side stop with scale 1500 mm - 1x freely movable foot switch - Operation manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.