item-No.: 158370111 is deleted from the database!

10 similar machines:

approved
dealer
Machine: FERROMATIK MILACRON Elektra Evolution
New in: 2005
used
Seller: Land-de Complast GmbH

Screw diameter: 35 mm Stroke volume: 173 cm³ Injection weight in polystyrene: 158 g/hp Injection pressure: 2,445 bar Clamping force: 155 t Lights Tie bar spacing H x V: 520 x 520 mm Tool installation height min./max: 200 / 590 mm Opening distance: 440 mm CONTROL: Mosaic Screen text: german / english Operating instructions: german / german FHK interface for robots: Yes Core pull: 0 Pump drive power: no installed heating power: 13.1 kW Total weight: 7,800 kg Dimensions L x W x H: 5.5 x 1.6 x 2.2 m Payment terms: 100 % before taking over the machine, net only

approved
dealer
Machine: FERROMATIK MILACRON Magna T(MTs) 150-450
New in: 2017
used
TOP Seller: Land-pl Szczep-pol s.c.
Location:: 91212 Lodz

Ferromatics Milacron Magna T(MTs) 150-450 / Production line with the Wemo 6-5 xDesign robot, Wemo WCS-R conveyor belt and contactor housing / Machine in very good technical condition Year of Make: 2017 Injection unit: Screw diameter: 45 mm Injection weight: 215 g Spray pressure: 1984 bar Dosing volume: 226 ccm Clamping unit : Clamping force: 150 t Tiebar spacing: 510x510 mm Size of the clamping plates: 740x740 mm Ejector: hydraulic Clamping unit: toggle lever Control: B&R - Touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Operating hours: 11,000 in automatic mode Euromap 67 Robot interface Air Valve x 1 Hydraulic core pull ...

Machine: FERROMATIK MILACRON Elektra 100 S Full
New in: 2000
used
Seller: Land-de Tecplast e. K. Machinery
Location:: Mülheim an der Ruhr

Ferromatik Injection Moulding Machine Type: Milacron Elektra 100 p. 14866 Runhour, Full electric Control: IQT Year: In 2000 Clamping unit Clamping force t: 100 Opening stroke mms: 920 Distance between tie bars mm: 470 x 470 installations height min / max. mm: 250/520 Mould fixing platen size h x v: 690 x 690 Injection unit Screw size mms: 40 Injection shot weight in Polysterol gr: 180 Injection volume cm?: 201 Injection pressure increased cash: 2530 Size and weight dimension HxWxD m: 7.6 x 1.8 x 2.2 Totally weight kg: 6930 Additional information 14866 Runhour euro map 12

Machine: FERROMATIK MILACRON Elektra 100 S
New in: 1997
used
Seller: Land-de Tecplast e. K. Machinery
Location:: Mülheim an der Ruhr

Ferromatik injection moulding machine Type: Milacron Elektra 100s 27000 runhour, full electric control: IQT year: 1997 Clamping unit Clamping force t 100 Gap mm: 920 Holm dimension mm: 470 x 470 min/max height mm: 250 / 520 Plate size: 690 x 690 Injection unit Screw diameter mm: Gr 40 injection weight: 180 Injection volume cm m³: 201 Spray pressure bar: 2530 Dimensions and weights Dimensions Lxwxh m: 7.6 x 1.8 x 2.2 machine weight kg: 6930

approved
dealer
Machine: FERROMATIK MILACRON K75-S 2-Farben
New in: 1996
used
Seller: Land-de Spritzgussmaschinen-Handel Makies GmbH
Location:: 31319 Hannover
Price: VB 7.500 €

full functional 2-colour /2 component injection molding machine K75-S 2F in L-Format Year 1996 Internationale Size 750H 200/100 L working hours: 32750 h controller: IQT 6 (german Text) clamping unit (extende tie bars +200mm) clamping force: 750 kN/ 75 tons distanc. tie bars: 420 x 420 mm platens dist. max: 850 mm (max) tool height: 400 mm (min) platens size: 605 x 605 mm ejector force: 34 kN ejector stroke: 150 mm centering: 125 mm (nozzle/ejtector plate) injection units +1. Aggregat+ horizontal injection unitt (intern. size 200) screw diameter: 30 mm shot volume: 85 ccm injection pressure 2350 bar 4 x heatin ...

approved
dealer
Machine: FERROMATIK MILACRON Maxima MM800-4880
New in: 2007
used
Seller: Land-de Complast GmbH
Location:: Bayern

Screw diameter: 90 mm Stroke volume: 2,545 cm³ Injection weight in polystyrene: 2,188 g/hp Injection pressure: 1,917bar Clamping force: 800 t Lights Tiebar spacing H x V: 1,400 x 1,080 mm Tool installation height min./max: 400/1200 mm Opening distance: 2,250 mm CONTROL: Mosaic Screen text: german / english Instruction manual: german FHK interface for robots: Yes Core pull: 6 Pump drive power: 130 kW installed heating capacity: 55 kW Total weight: 40,000 kg Dimensions L x W x H: 9.9 x 3.1 x 2.9 m Payment terms: 100 % before taking over the machine, net only

approved
dealer
Machine: FERROMATIK MILACRON ELEKTRA 155
New in: 2003
used
Seller: Land-pl MASZYNERIA SP. Z O.O.
Price: 36.905 €

FERROMATIK MILACRON ELEKTRA 155 injection moulding machine manufactured in 2003 in Germany after a general overhaul at a total value of approximately 14290 EUR. During the 2024 overhaul, components such as the clamping system drive screw, belt pulley, drive belt, lubrication system sensor, clamping pins, pan and drive belts in the plasticising unit were replaced. In addition, both motors in the plastification unit were refurbished and a periodic column tension check was carried out with the GEFRAN strain gauge system. The FERROMATIK MILACRON EE155 injection moulding machine is the perfect choice for the mass production of plastic parts of different colours, shapes and sizes by injection m ...

approved
dealer
Machine: FERROMATIK MILACRON Elektra Evolution
New in: 2008
used
Seller: Land-de Complast GmbH
Location:: Bayern

Screw diameter: 40 mm Displacement: 251 cm³Injection weight in polystyrene: 229 g/hp Injection pressure: 2,494 bar Clamping force: 155 t Lights tie bar distance H x V: 520 x 520 mm Tool installation height min./max: 200 / 590 mm Opening path: 440 mm CONTROL: Mosaic Screen text: german / english Operating instructions: german / english FHK interface for robots: Yes Core pull: 2 Pump drive power: not applicable Total connection load: 79.0 kW Total weight: 7,800 kg Dimensions L x W x H: 5.5 x 1.6 x 2.2 m Terms of payment: 100% before taking over the machine, strictly net

approved
dealer
Machine: FERROMATIK MILACRON K60
used
Seller: Land-de Innovac GmbH
Location:: Deutschland

Clamping force: 600kN, screw diameter: 30mm, platen dimensions: 525x507mm, clear width between tie bars: 355x355mm, min. mould installation height: 200mm, opening stroke: 420mm, connected load: 21.4kW, operating hours: 41,876h, with documentation and maintenance reports, without accessories, has been regularly serviced, on-site inspection is possible.

approved
dealer
Machine: FERROMATIK MILACRON K60-S
New in: 2001
used
Seller: Land-de Innovac GmbH
Location:: Deutschland

Clamping force: 600kN, screw diameter: 30mm, platen dimensions: 525x507mm, clear width between tie bars: 355x355mm, min. mould installation height: 200mm, opening stroke: 420mm, connected load: 25.5kW, with documentation and maintenance reports, without accessories, has been regularly serviced, on-site inspection is possible.

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)