AMADA EM 2510 NT Turret punching (year 2012) AC servo Direct twin drive Punching hours: 14271 h Machine on hours: 29580 h Excellent maintenance Punching force: 200 kN Work field: 1270 x 2500mm With replacement: 1270 x 5000mm Thickness max. of the material: 3.2mm ( ST-400N/mm2 ) Maximum material thickness: 3.2 mm. (brush table) Swan neck: 1,310mm Max weight of the piece: 50kg (F4) 150kg (F1) X-axis feedrate: 100m/min Y-axis feedrate: 80m/min Control: Amada AMNC-PC RS-232C serial interface Simultaneous axes speed: 128m/min Turret traverse speed (bidirectional): 30 1/min Max cadence punching with dies VACUUM” (hit rate): 500/min (5mm stroke, 25.4mm pitch) 780/min (5mm stro ...

The turret press AMADA EUROPE 245 was produced in 2000 (machine installation: 2001). The price of the machine includes: installation and training in the use of the machine Punching machine technical data: - CNC control: FANUC 18 i-P - working time: 35,000 h - pressure: 20 t - work table: X = 600, Y = 400 - maximum punching format without intercept and with 31 stations head: 1020 x 1290 (Y-10; Y1010 T2XX; Y-50; Y970 T3XX) - maximum size of a punched sheet with an intercept: 1020 x 2540 mm - maximum size of the sheet to be punched with the intercept + 1 revolution (optional): 1500 x 2540 mm - maximum sheet thickness on the ball table: 6 mm - maximum sheet thickness on the brush  ...

Power: 4 kW X - axis: 2520 mm Y - axis: 1550 mm Number laser heads: 0   CNC Brand: Fanuc CNC Model: 160i-L AMADA - LC 2415 A3 CNC Laser cutting machine 4kW 2500 x 1500 mm MACH - ID 6348 Make: AMADA Type: LC 2415 A3 Control: Fanuc 160i-L YOP: 2004 Hours: 11753 Working area X Axis    2.520 mm Working area Y Axis    1.550 mm Working area Z axis         300 mm Table Length          2.550 mm Table Width            1.550 mm Power resonator      4 kW kW / Amp Feed rate X-Axis      80,000 mm Feed rate Y-Axis  &nbs ...

Blade length 205 mm Max cutting performance Sheet R = 42 kg / mm2 4 mm Sheet R = 70 kg / mm2 3 mm Engine power 3 kW Number of beats / minutes 50 min Table dimension 625 x 954 mm Capacity of the oil tank 25 l Weight 500 kg The setting between the blades is fully automatic. Standard: - 1 set of knives at 30 ° (mounted on the machine) - 1 stop switch - 1 general circuit breaker - 1 stop adjustable and adjustable every 15° - Fill the first oil - Manual with installation and maintenance instructions and service keys.

Height under guides: 90 mm Throat: 0 mm Table length: 400 mm Table width: 400 mm Make  Amada HA 4 Type HA 400 Year 1982 Bandsaw automat Capacity round max. diam.Cap = 400 x 400 Angle degrees max.Speed = 15 - 90M Type machine: Vert./Hor.Power 5.5 kW Workpiece height (mm) Chip conveyor Workpiece width (mm)Load = 2500 kg Capacity rectangle (mm) 90 Gr. Cutting Capacity square (mm)Bundel clamp Managing the cycle of automatic travel included various lengths in the same quantity cycle Control of pressure and cutting speed Pressure regulation of vice clamping Screw chip conveyor Coolant system  

3000 x 1500mm 4000w  ...

• more information

Capacity round maximum diameter: 0 mm Angle degrees maximum: 0 Capacity square: 0 mm Workpiece height: 0 mm Workpiece width: 0 mm Capacity rectangle: 0 mm Technical data Cut range: round up to: 250 mm Band length: 3505 mm Band width: 25 mm Sheet thickness: 0.95 mm Voltage 50 Hz 3x: 380 Volt Power: 2.2 kW Machine´s weight about: 800 kg Overall dimensions machine: Length: 2000 mm Width: 1900 mm Height: 1400 mm

CNC punching, nibbling machine Specifications: - Max. punching force 20 t - Max. sheet size 2540 x 1020 mm - Max. sheet size with relocation 2540 x 1500 mm - Working range without repositioning X 1290 x Y 1000 mm - Max. punching diameter 88.9 mm - Max. punchable material thickness on spherical table 6 mm - 31 tool stations with 19 tools - Turret speed 25 rpm - Punching speed 480 strokes/min. - Compressed air requirement 6 bar - Drive 400 V / 26 kW - Space requirements W 2900 x L 5000 x H 2600 mm - Weight approx. 10000 kg - Operating hours approx. 9500 h - Separate control panel with FANUC 18i - P controller - Various accessories in tw ...

This AMADA EUROPE 255 CNC Punching machine was manufactured in the year 2005 in France. It is equipped with a Fanuc Series 18i-PB control unit. The machine has a punching force of 220 kN. ...

• more information

This AMADA Europe 255 punching machine was made in the year 2003 in France and has 39000 production hours. It is equipped with a Fanuc Series 18i - P control unit. The machine has a punching force of 200 kN. ...

• more information