x-travel: 650 mm y-travel: 520 mm z-travel: 475 mm Control: HSCI 640 workpiece dia.: 630 mm workpiece height: 600 mm handwheel: HR-420 : 30 fach Internal cooling system: 12 bar number of spindle speeds: 20.000 U/min/rpm Machine on: 12.435 Spindle hours: 4.773 h tool adaptor: HSK 63 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC controller: Mitsubishi M-730BM (MAPPS 4) Capacity X-axis travel mm: 280 Z-axis travel mm: 820 Turning length mm: 713 Max. turning diameter mm: ø: 430 Swing over bed mm: ø: 978 Swing over cross-slide mm: 808 Upper turret Number of tool slots St .: 12 Speed driven tools RPM: 10.000 Main spindle Speed spindle rpm: 3.000 Drive power spindle kW: 22/18.5 Spindle bore mm: 111 Chuck type: Hollow Chuck (12") Manufacturer: KITAGAWA Spindle nose: JIS A2-8 Tailstock Tailstock travel mm: 734 Holder: MT5 Equipment Chip conveyor Signal lamp High pressure pump Foot switch for chuck or collet system Interface for Bar feeder Working time hours Under power: 48.630 Spindle: 8. ...

This 3-axis DMG Mori Seiki CTX 310 ecoline was manufactured in 2012. A horizontal turning machine featuring a Heidenhain TNC 620 CNC control, 12 stations tool turret with VDI 30 tool reception, and 6 driven tool stations. It includes a chip conveyor and supports up to 5,000 rpm spindle speed. If you are looking to get high-quality turning capabilities, consider the DMG Mori Seiki CTX 310 ecoline machine we have for sale. Contact us for more information about this machine.

Travel X/Y/Z: 400mm/300mm/495mm, spindle center table distance: 25mm-325mm, spindle nose table distance: 125mm-620mm, rapid traverse: 24m/min, feed rate: 5m/min, spindle type: ball screw, spindle diameter: 36mm, speed: 6000rpm, spindle power: 5.5kW, spindle mount: BT40. Tool slots: 30, tool change time: 2.5s, clamping time: 7s, max. tool diameter/length: 110mm/250mm, max. tool weight: 8kg. Table dimensions X/Y: 315mm/315mm, table angle: 7.5°, table clamping force: 3400kg, max. workpiece weight: 150kg. Dimensions X/Y: approx. 1900mm/2300mm, weight: approx. 4500kg, control: Fanuc 0-M, operating hours: 732h, piece counter: 172776. Including cooling lubricant system and tool magazine with 30 pl ...

YEAR: 08/2004 LONGITUDINAL CORSA: X 800 MM TRANSVERSE COURSE: Y 700 MM VERTICAL COURSE: Z 700 MM ASSE B INDEXED 1st PALLET (2) 500X500 MM CNC MAPPS MSG-501 TOOL WAREHOUSES 60 LOCATIONS ATTACK MANDRINO BT40 MANDRINO MASSIMA VELOCITY 12000 RPM POWER OF MANDRINO'S POWER 26 KW

Table length: 1700 mm Table width: 660 mm Longitudinal X: 1524 mm Cross Y: 650 mm Vertical Z: 650 mm Positions ATC: 30   Positions APC: 0   CNC Brand: Mori Control MAKE   Mori Seiki TYPE    MV 65 B / 50 YEAR   1997 SPECIFICATIONS X - Travel    1524 mm Y - Travel    650 mm Z - Travel     650 mm bed / plano / portal / moving column    VMC Table Length x Width   1700 x 660 mm Table load in kG    2000 Kg Spindle Taper    Bt 50 kW power on spindle    35 Hp kW Spindle speeds / ranges    6000 Rpm ATC tool changer    30 Pos x Ø 240 x 20 ...

Machine Details Stock-No. 1105-03607 Type of machine CNC Turning and Milling Center Make MORI SEIKI Type SL 150 SMC Year of manufacture 1997 Type of control CNC Storage location FRANCE Country of origin Japan Delivery time immediately Freight basis ex stock Technical details turning diameter 420 mm turning length 560 mm control fanuc 16 T swing dia. 455 mm rapid power traverse in X-and Z direction 18/24 m/min Travel x/z 220 / 520 mm bar material dia. 45 mm spindle drive 11 / 7.5 kW Spindle RPM 50 - 5000 U/min Spindle Torque 143 Nm spindle nose JIS A2-5 Turret positions 12 supspindel wiht 3 jaw chuck sup spindle Travel 450 mm total power requirement 25 kW Addition ...

Mori Seiki ZT 1500YB in operation, can be viewed during operation. 2002 yes Mori CL 2000 can be viewed under power. Currently not in operation 2004 yes Mori Seiki SL-204 can be viewed under power. Currently not in operation 2001 yes Mori Seiki SL-204 can be viewed under power. Currently not in operation 2003 yes

Mori Seiki ZT 1500YB in operation, can be viewed during operation. 2002 yes Mori CL 2000 can be viewed under power. Currently not in operation 2004 yes Mori Seiki SL-204 can be viewed under power. Currently not in operation 2001 yes Mori Seiki SL-204 can be viewed under power. Currently not in operation 2003 yes Tsugami NP-32 can be viewed under power. Currently not in operation 1992 yes Riello in operation, can be viewed during operation. 2002 yes Muratec MW 120 GT 2012

Machine Details Stock number 1105-03758 Machine type CNC lathe - inclined bed machine Brand MORI SEIKI Model SL 250 BMC Year of construction 1999 Control type CNC Control FANUC MSC 503 Storage location FRANCE Country of origin Japan Delivery time immediately Freight base EXW (Incoterms 2000) free Technical details Turning diameter 356 mm Turning length 500 mm Control FANUC MSC 503 Turning diameter over bed 520 mm Turning diameter above the paddling carriage 275 mm Center width 525 mm Travel - x 260 mm Travel - z 550 mm Spindle speeds 42 - 4000 rpm Spindle bore 85 mm Turret head (x-fold) 12-fold Shank cross-section 25 Shank diameter 50 mm Rapid traverse longitudina ...