TECHNICAL DATA This furnace system is for recrystallization, normalization, soft annealing, stress relief, annealing and conditionally suitable for soldering. belt width: 1000 mm working height: 300 mm (over belt) heated length: 4250 mm electrical heating power: 300 kW heating zones: 4 heating temperature: 900 – 1120°C belt speed: 6 – 60 m/h (continuously adjustable) nominal connected load: 310 kW natural gas consumption: 50 Nm3/h natural gas pressure: 30 – 50 mbar nitrogen consumption: 70 Nm3/h – on purging nitrogen pressure: 100 mbar emergency cooling water pressure: 4-6 bar furnace length: 25298 mm furnace width: 2200 mm furn ...

Roller hearth furnace, make Mahler type: RHEE 500/100/3000-6500 yom: 2010 refurbished: 2016 max. charge weight: 40 kg/m nominal throughput: 288 kg/h clear roll width: 500 mm clear height above roll: 100 mm furnace length: approx. 22100 mm working temperature: - Warm-up zone: 800-1000°C - High temperature zone 800-1250°C heating: electric connected load: 400 kW gases used: nitrogen, hydrogen

1. final waxing zone max 750 degrees Celsius 2. high temperature zone / heating zone max approx. 1130 degrees Celsius 3. abrupt cooling up to 40 Hz (must be revised) has not been running for 15 years due to disuse 4. rapid cooling zone up to 400 degrees Celsius 5. recirculation cooling zone up to 250 degrees Celsius 6. cooling channel up to 80 degrees Celsius 7. oven outlet up to 30-40 degrees Celsius 8. palletizer Working temperature range: Retrieval zone 900 to 1000 °, sintering zone 1120 °, stearate burn-off zone 700 to 900 °, heating with fuel gas, sintering zone electric, retrieval zone electric, conveyor belt control range 25 to 500 mm/min, Consumption data electric heating approx.  ...

Thermopöl Pump Magnetic Pump for Daub Heuft Thermal Oil Furnaces  ...

• more information

The combined cycle plant consists of a gas turbine, waste heat recovery boiler, steamturbine and a generator, mounted in a single shaft configuration. The capacity of the installation is 53 MW • The prime mover of the installation is an aero derivative General Electric LM6000-PB-DLE. 40 MW - 30,000 hours remaining till next major overhaul - Running hours 74.100 hours , start 3356 - Next overhaul in 5000 hours(hot gas path) - Next major overhaul: in 30.000 hours • The Steam Turbine is a SIEMENS ENK40/53-3, with a capacity of 13 MWe. Dismantled, stored and ready for transport.

82MW ISO rated combined cycle power plant. The plant’s main equipment is composed of a Rolls Royce Trent 60 DLE Gas Turbine (also known as the SGT-A65), a Nooter/Eriksen HRSG, and a Siemens SST-300 Steam Turbine. These are below; 1. Rolls Royce USA, manufactured Trent 60 (SGT-A65) Gas Turbine Generator Set; · Manufactured in 2016, delivered in August 2017. Never used. · 65.9 MW(e) ISO · 43.8% Gross efficiency / 8,228 kJ/kWh Heat Rate · DLE Dry Low Emissions with ≤ 25 ppmvd at 15% O2 on fuel gas · Cold start to full power in under 10minutes · 50Hz, but easily convertible to 60Hz · Engine still preserved in original shipping container · An aero derivati ...

Displacement: 244cm³, max. operational temperature: 100°C. ...

• more information

Clamping plate, milling support, plate field, welding table, welding table, plate boring mill, clamping angle, clamping cube, clamping devices, clamping supports, clamping tool, clamping box, clamping tower -Clamping block: for workpiece clamping -Width: 220 mm -Length: 220 mm -Height: 122 mm -Groove width: 25 mm -Number: 1x milling support available -Price: per piece -Weight: 43 kg

Manufacturer: Indramat Achscontroller, Type: KDV1-3-100/220/300 W1/220, Seriennummer: 758606-060 385 991, Gebraucht: yes,  ...

• more information

1 piece gas-fired chamber furnace with air circulation and bogie hearth Type: KLWg 220/180/650 for unsupervised operation for three-phase three-phase current 400 volts/N, 50 Hz. for temperatures up to max. 700°C for natural gas "H" External oven dimensions approx. Width in mm: 3400 Width with control cabinet in mm: 3800 Height in mm: 3200 Length with inserted. Bogie hearth in mm: 8000 Length with fed. Bogie hearth in mm: 15500 clear interior dimensions approx. Width in mm: 2400 Height over beams in mm: 1800 Length in mm: 6500 Volume in m³: 25,7 Batch dimensions max. Width in mm: 2000 Height in mm: 1500 Length in mm: 6100 Weight max. in kg: 20000 Connected  ...