Steel hall complex built in three construction phases (consisting of a small production hall built in 1990, a large production hall built in 1997 and a warehouse built in 2007), which is to be dismantled in the short term. It is a thermally insulated hall complex whose supporting structure, building envelope and equipment can be reused. H6 - Production hall, built in 1990 with crane runway hL23.06 x hB13.32m x dH6.3m / fH8.8m = GFA 307.16 sqm ; Storage area on the upper floor: 5.07 x 12.95 = NF 65.66 sqm ; The primary construction consists of hot-rolled Euro profiles. The secondary construction for the building envelope is made of rolled steel, i.e. roof purlins made of IPE 160;  ...

It is a thermally insulated lightweight hall (built in 2008), whose hot-dip galvanized supporting structure and sandwich cladding together with various equipment can be reused. DIMENSIONS according to construction documents: Covered area: 375.00 square meters; Width of the hall: 25.00 m AK wall; Length of the hall: 15.00 m AK wall; Frame spacing: 5.00 m MM frame supports; Eaves height: 5.24 m at the intersection of roof and wall; Ridge height: 7.30 m building height; Purlin spacing: 2.50 m floor area / 2.54 m roof pitch; Wall beam spacing: 2.50 m; Roof pitch: 10 degrees, symmetrical gable roof; LOAD ASSUMPTIONS: Wind load: 0.59 kN/m2 (DIN 1055-4 March 2005). S ...

Thermally insulated hall, whose supporting structure and part of the cladding as well as various accessories can be reused. SUPPORTING STRUCTURE: The primary structure consists of hot-rolled Euro profiles (IPE and HEA / HEB). The secondary structure to accommodate the building envelope consists partly of hot-rolled steel profiles and partly of cold-formed steel profiles made of galvanized strip steel. ROOFING: Sandwich panels, grey-white, on purlins partly made of hot-rolled steel profiles and partly of cold-formed steel profiles. WALL CLADDING: Sandwich panels, grey-white on wall substructure made of cold-formed and galvanised lightweight profiles. LOCATION: South Eifel, Rhi ...

Hot-dip galvanized steel hall [hL53.6m x hW15.6m x dH6.5m / fH7.6m] dismantled from stock. HALL STRUCTURE: the hot-dip galvanized primary structure consists of 9 main frames (IPE 450 frame columns, IPE 300 frame trusses) as well as 2 lightweight end wall constructions (HEA 140 corner supports, HEA 160 internal supports, HEA 120 gable wall transoms) of steel grade S 235 JRG2 (St 37), and the secondary structure consists of hot-dip galvanized lightweight profiles, i.e. roof purlins such as eaves purlins made of Sigma profile SE250/100/30/15/2.5 mm and C-profile wall beams C+150/90/43/15/3 mm of steel grade S355 JRG3 (Lv. 52). The bracing consists of pressure pipe diameter 70 x 2.6 mm as well ...

It is a used but durable hall construction which could also serve as a ball sports / football hall, equestrian sports hall and much more in the future. The steel frames are self-supporting and have a height of almost 11 meters in the ridge (in the middle). APPROXIMATE DIMENSIONS: Floor area: 2560 sqm built-up BG area; | Hall length: 65.50 m AK wall + boiler room; | Hall width: 39.09 m AK wall planking; | Eaves Height: 4.27m UK Roofing; | First - Height: 10.70 m OK Roofing; | Roof pitch: 18.75 degrees sym. gable roof; | STRUCTURE: Solid, articulated steel frame construction, with steel frames made of rolled sections mounted on point foundations or rails. The end frames ...

For sale is a hot-dip galvanized primary construction of a hall structure (hL24m x hW17m x dH4.6m) from an unrealized construction project. The roof purlins and wall beams which were planned as a secondary construction are not part of the offer. System length: 24.00 m; System width: 17.00 m wingspan; eaves height: 4.60 m; ridge height: 6.85 m; roof pitch: 15 degrees; PRICE: on written request with complete company / contact details.

General SKU404U1229 LocationBarneveld MakeLudwig Edel No.85 250/1 Year of construction1986 Pressure Working pressure2 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialStainless steel Volume2500 Ltr. Motor1.1 KW Specified Features - Stainless Steel Reactor MaterialStainless steel 1.4571 (316Ti) Stainless Steel Reactors ReactorBioreactor Capacity2500 Ltr. (max. 3500 Ltr.) Vessel sizesdia. 1600x1970 mm Dished bottomcheck Dished top sidecheck ManholeDN100 Top connectionsDN25, DN40 (2x CIP) OutletDN50 Half coil jacketedcheck Max. temperature-5 °C With propellor stirrercheck (magnetic) Motor1,1 kW Speed mixing shaft1400 rpm Information Mo ...

General SKU305U615 LocationBarneveld MakeSTC Engineering GmbH TypeReaktor 6500LTR No.6004 Year of construction2005 Pressure Working pressure0.2 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialStainless steel Volume6500 Ltr. Motor7.5 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity6500 Ltr. Vessel sizesDia. 2000x2534 mm Dished bottomcheck Dished top sidecheck ManholeDia. 450 mm Top connectionsDN200, DN100, DN50(4x) OutletDN80 Half coil jacketed45,5Ltr Max. temperature-20/160°C With paddle stirrercheck EKATO, Type: HWL2080 Motor7,5kW, 380-420/655-725Volt, 1440rpm (EX) Speed mixing shaft46rpm Stainless Steel Reactor ...

General SKU404U1220 LocationBarneveld MakeAlbi Alois Binderberger No.1634 Year of construction1999 Pressure Working pressure2 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialStainless steel Volume2500 Ltr. Motor1.1 KW Specified Features - Stainless Steel Reactor MaterialStainless steel 1.4301 (304), Stainless steel 1.4571 (316Ti) Stainless Steel Reactors ReactorBioreactor Capacity2500 Ltr. (max. 3400 Ltr.) Vessel sizesdia. 1600x1970 mm Dished bottomcheck Dished top sidecheck ManholeDN100 Top connectionsDN25, DN40 (2x CIP) OutletDN50 Half coil jacketedcheck Max. temperature130 °C With propellor stirrercheck (magnetic) Motor1.1 kW Spee ...

General SKU404U1218 LocationBarneveld MakeBertsch No.9484 Year of construction1989 Pressure Working pressure0.5 Bar Working pressure jacket6 Bar Main Features MaterialStainless steel Volume12500 Ltr. Motor4 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity12500Ltr (max. 16110Ltr.) Vessel sizesdia. 2500x3776 mm Dished bottomcheck Dished top sidecheck Manholedia. 500 mm Top connectionsDN40, DN25 OutletDN80 (2x) Half coil jacketedcheck (213 Ltr.) Max. temperature100 °C (vessel) With paddle stirrercheck (TMR Turbo) Motor4 kW Speed mixing shaft15-63 rpm Stainless Steel Reactors MaterialStainless steel 1.4571 (316Ti) Information Mounted on legsch ...