We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
-Digital display Fagor. -Accessories available. Tip height 200 mm Top width 800 mm Turning diameter over slide/bed 240/425 mm Length of the bend of the Planscheibem with 4 JAWS 180 mm Spindle bore 51 mm Inner cone 60 metric Recording camlock D6 " Speed 45-2240 Rev/min The lead screw pitch 6 mm Tailstock spindle mount MT 4 Diameter of tailstock Quill 70 mm Quill: 200 mm stroke Feeds: Along 0.05 2.8 mm / Rev Plan 0.05 2.8 mm / Rev Rapid traverse: LW Thread pitches: Metric 0.5 14 mm English 2-56 U/1 " Module 0.125 3.5 Motor 380 Volt, 12.5 HP Machine dimensions: B x T x H 2400 x 1200 x 1800 mm Weight 2100 kg
Peak height 200 mm Tip width 1500 mm Turning- over slide 235 mm over bed 425 mm via kröpfung 470 mm Speed Continuous 45 - 2240 rpm Spindle bore 45 mm • the Reitstockpinole 55 mm Morse cone of the spindle and tailstock MK 4 ...
- Digital display Heidenhain - Accessories available Center height 200 mm Center width 1000 mm Turning diameter over carriage/bed 240/425 mm Length of crank from the plank with 4 jaws 180 mm Spindle bore 51 mm Inner cone 60 metric Recording Camlock D6" Speed 45-2240 rpm Lead screw pitch 6 mm Tailstock quill holder MK 4 Diameter of tailstock quill 70 mm Quilles: stroke 200 mm Feeds: Longitudinal 0.05-2.8 mm/rev Flat 0.05-2.8 mm/rev Rapid traverses: Longitudinal Thread pitches: Metric 0.5-14 mm English 2-56 U/1" Module 0.125-3.5 Motor 380 volts, power 12.5 hp Machine dimensions: W x D x H 2400 x 1200 x 1800 mm Weight 2100 kg
Description Digital display (3 axis) Technical data: 1100 X 300 mm clamping surface Longitudinal stroke 700 mm Transverse stroke 250 mm Vertical lift 470 mm Spindle speeds 45-2000 RPM. Recording ISO 40 12 Milling feed longitudinal and transverse 18 800 mm / min. vertical 7.2 320 mm / min. The milling spindle 7 HP drive motor Drive motor of 1.5 HP table Machine weight 2050 kg
Description Digital display (3 axis) Technical data: 1100 X 300 mm clamping surface Longitudinal stroke 700 mm Transverse stroke 250 mm Vertical lift 470 mm Spindle speeds 45-2000 RPM. Recording ISO 40 12 Milling feed longitudinal and transverse 18 800 mm / min. vertical 7.2 320 mm / min. The milling spindle 7 HP drive motor Drive motor of 1.5 HP table Machine weight 2050 kg
Tip height 300 mm Top width 2000 mm Spindle speeds 16-1120 U/min Dimensions L/W/H 3750/1100/1400 mm Weight approx. 2500 kg ...
Accessories available Tip height 300 mm Top width 2000 mm Spindle speeds 16-1120 RPM Dimensions L/W/H 3750/1100/1400 mm Weight approx. 2500 kg ...
-Digital display -Accessories available. Clamping surface 1100 x 300 mm Longitudinal stroke 700 mm Transverse stroke 250 mm Vertical lift 470 mm Spindle speeds 45-2000 RPM. Recording ISO 40 12 milling feed longitudinal and transverse 18 800 mm / min. vertical 7.2 320 mm / min. The milling spindle 7 HP drive motor Drive motor of 1.5 HP table Weight of the machine CA. 2050 kg
Digital display Anilam Table 1250 x 350 mm Longitudinal path 850 mm Crosspath 250 mm Vertical path 470 mm Spindle speeds 45 - 2000 rpm. Recording ISO 40 ...
Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Table length: 900 mm Table width: 300 mm Longitudinal travel (X-axis): 700 mm Transversal travel (y axis): 250 mm Vertical travel (z axis): 370 mm Travel of the upper slide: 400 mm Spindle speeds: number (steps): 12 from: 45 rpm up to: 2000 rpm Taper in spindle: 40 ISO Feeds steps:: 12 longitudinal from: 18 mm/min up to: 800 mm/min transversal from: 18 mm/min up to: 800 mm/min vertical from: 7.2 mm/min up to: 320 mm/min Rapid traverse: longitudinal: 2.5 m/min transversal: 2.5 m/min vertical: 1.0 m/min Voltage 50 Hz 3x: 380 Volt Motor output: 6 HP Machine´s ...