LIQUIDATION of Double hood vacuum machine from the German manufacturer of high quality KRAMER GREBE, model QUICK AUTOMATIC. Its condition is of occasion equipment totally revised in its entirety (re-release) guaranteed. Built in stainless steel and aluminum. The machine is ready to plug in and work with. Busch empty pump: 63m3. Final pressure: 0.5 mbar Vacuum system: per sensor External measurements of the machine: 1000 mm long x 800 mm wide x 950 mm maximum height down lid, 850 mm working height. Camera dimensions: 430mm x 470 mm x 160 mm high. Welding bar measurements: 430 mm x 2. Weight: 175 Kg. Voltage: 380 V, 3 Ph, 50 Hz, Vacuum machine, vacuum hood, vacuum packagi ...

Kramer+Grebe GmbH & Co. KG grinder with lifter for 200 liter meat bins, type: WW200, serial number: 281/0262, year of construction: 2002, 230-400 V, 1 Ph, 50 Hz, 87-100 A, plate diameter: 200 mm, type lifter: Beschick., number: 226/731/1, year of construction: 1993, lifting height: 1900 mm, dimensions grinder: 1760 mm x 1760 mm x 1900 mm, dimensions lifter: 600 mm x 500 mm x 2800 mm. Including trolley with spare parts, dimensions: 1000 mm x 1000 mm x 1200 mm and a 200 liter meat bin.

Engine in exchange Yanmar Type=3TNE88-ENKR from Kramer wheel loader with warranty immediately available from stock. all prices plus vat. info@miw-zeven.de  ...

• more information

Throughput depending on material type, speed, and cutting set Capacity: up to 4.000 kg/h Main motor power: 10KW / 15 KW Power supply: 380 V, 50 Hz Dimensions of the machine in cm: Width: 110 Lenght: 90 Height: 115 Delivery time: 10 working days after advanced payment  ...

• more information

Kremer Grebe cutter 100 liter 100-liter bowl 2 mixing speeds 2 bowl speeds – fast and slow Unloading device: left side Main cover is made of special steel, stainless steel Noise-canceling cover made of special plastic Distribution cabinet made of special steel, inside the machine 6 pieces Knives Machine dimensions in cm: width: 190 depth: 130 height: 130 Main motor power: 22 kW Voltage: 400 V, 50 Hz Delivery time: 30 working days after advanced payment

Motorized folding machine make KRAMER type AMaut IIYear of construction 1985Effective length: 1020 mmMax. Sheet thickness: 3 mmMax. Opening width of the upper beam: 290 mmMax. Adjustment speed of the lower and bending beam: 90 mmMotor power bending beam: 2.2 kWEngine power upper beam: 1.5 hpDimensions L x W x H: 1600 x 700 x 1500 mmWeight approx: 1300 kgWith:- backgauge- Footswitch- separate control panel- one-sided bending cheek driveused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your ...

Motorized folding machine make KRAMER type AMaut IIMasch. -No: . 45858, year of construction 1985Working length: 2025 mmMax. Sheet thickness: 2.25 mmMmin. Turning width: 5 X sMin. Inner radius: 1.5 - 2 X sAdjustment of the lower and bending cheek: 90 mmfor round bends: 90 mmhighest working position of the upper beam: 190 mmmax. Opening width of the upper beam: 290 mmDrive power: 3.0 / 1.1 kWDuration of a workflow: 7.0 sec.Weight approx: 2450 kgExternal dimensions approx: 3000x1000x1650 mmWith:- Control panel on the right side of the machine- Easy bending angle adjustment on the control panel- optional switching to automatic, semi-automatic or inching mode- Potentiometer for the degree adjust ...

Swing bending machine KRAMER type A toll. II 1000 Fabr. No. 48 287 Year of construction 1990 Usable length 1060 mm sheet thickness 3.75 mm Stroke of the upper cheek 180 mm Adjustability of the bending cheek 60 mm Backgauge 480 mm Drive power Bending cheek drive 4 kW Drive power Upper cheek drive 1.5 kW Mains connection 400 Volt, 50 Hz - manual and semi-automatic control - Angle adjustment via angle dial - one-piece pointed rail 135 - Backgauge with hand crank adjustment and simple dimension scale - continuous stop rail - electric foot switch, 3-fold space requirement L x W x H 2200 x 1350 x 1500 mm Weight approx. 2.3 ton. good condition; used

Gr. Working width: 1530 mm for sheet metal up to: 2.5 mm opening width upper beam: 290 mm adjustable beam: 90 mm upper cheek drive: 1,1 kW under cheek drive: 3 kW Backgauge: Yes Weight: 2200 kg space requirement: 800 x 3000 x 1380 mm  ...

• more information

Swing bending machine Manufacturer Kramer Type V 4000 bending length 4000mm sheet thickness 3.0 mm 100% functional, very good condition  ...

• more information