General SKU292M349 LocationBarneveld MakeBerstorff TypeZE-25 Mach.No.EO 0324/88 Main Features Motor6 KW Inlet diameter25 mm L/D20 Specified Features - Double screw extruder Double screw extruder(1x) Screw diameterdia. 25x500mm L/D20 Number of heating zones:3 Electric heatingcheck Water coolingcheck DC-motor6 KW, 200 Volt Screw speed0-450 Rpm Feeding with hoppercheck Feeding with metering screwcheck Information Year of construction1989 With switchgear( as is ) Sizes switchgear0,8x1,0x2,0 M Floorspace1,8x0,8 M Total height1,1 M Weight450 KG Extra Specifications incl. tempereer eenheid 3,5 KW, 380 Volt. THERE ARE NO SCREWS WITH THIS MACHINE !Double screw extrudersBe ...

General SKU042B319 LocationBarneveld MakeBerstorff TypeZE-130R Silicon tube extruder Mach.No.EO 2900/92 Main Features Motor90 KW Inlet diameter150 mm L/D10 Specified Features - Double screw extruder Double screw extruder(1x) Screw diameter150mm L/D10 AC-motor90,0 KW, 380 Volt (Ex) Screw speed± 75 Rpm Information Year of construction1993 Floorspace4,0x1,2 M Total height2,3 M Weight6500 KG ATEX compatiblecheckDouble screw extrudersBerstorffExtruders > Double screw extrudersBrand > Berstorff What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspe ...

120 mm cold feed pen convert-extruder, GE 120 SC, make Berstorff, output capacity up to 1,000 kg /h as a power extruder with strip spray head, complete rebuild mechanically and electrically in 2024  ...

• more information

BERSTORFF GmbH Mixing mill for all types of rubber compounds Roll width 120 cm Roll diameter 55 cm Machine in very good condition !  ...

• more information

1 x Berstorff GmbH 250mm strainer extruder, Year of manufacture: 1988, L/D ratio 7:1, power roller feed (300mm wide), with 120kW, 1800rpm DC variable speed motor mounted on top of gearbox (belt drive), with tube head and knife at top for sheet extrusion. Complete with control panel etc and in very good condition.

New and unused machine Berstorff twin screw extruder ZE 130A Extruder screws: 2x140 mm L/D 30:1 Built: 1988 (unused) Drive: DC motor - 250 kW Screw rotations: 300 rpm Extruder heating: 70 kW 2x Degassing complete screw in original packaging 2 machines available Location Germany, Wuppertal Visit possible, appointment by appointment

Stock No. 2680 1x partially overhauled and functionally tested Compounding extruder double screw, co-rotating intermeshing Segmented screws and cylinder barrel (water cooled) Screws 2x 64 mm - 40 L/D Screw speed up to 1200 rpm-1 Drive 482 kW-DC Gearbox Flender safety coupling atutomatik 3x degassing venting ports ( vacuum pump optional for extra charge ) 2x side feeding dosing extruder type ZSFE 50 twin screws with dm 48.5 mm with 4 kW each, speed up to 800 rpm.-1 Control cabinet with Siemens HMI Touch OPTIONAL at extra cost: 1) Screen-pack-changer changer 2) Vacuum pump 3) Pelletizing: ST strand, - WRG waterring or - UWP underwater pelletizing system 4) Granul ...

Berstorff Strainer Extrusion Line Consisting of: Extruder Supplier Berstorff Type GE 150KSx16D Year of construction 2007 Pins: 12 Pins per level: 8 Condition: good Weight approx. 10000 kg Screen change: hydraulic, bladder accumulator 20lt / 300Bar D = 200mm Gear pump Supplier: Maag Pump Systems Type: extrex® 110-5 RV Volume 716 cm³ / rev Year of construction 2013 Condition: good Heaters Supplier: Regloplas Type P140 Year of construction various Number 5 pcs. Cooling bath Cooling medium Water above, 2 rows below with 4 fans each Year of construction 2006 Condition: good Dimensions 9m Weight approx. 500 kg Especially 8 fans Installation tape Year of constructio ...

Berstorff 8inch (200mm) Cold Feed Pin Extruder Manufactured by: Krauss Maffei Berstorff Extruder Type: Vac GE 200 SC, Pin Type No of Pins: 2 X10 + 1X12 (Hydraulic adjustment) Screw Diameter: 8"/200 mm L/D ratio 18:1 Drive: 300 Kw, 1500 RPM Screw speed: 33pm Complete with Control Panel Roller Die Suitable for rubber compounds Year 2009

Berstorff 6inch (150mm) Strainer Extruder Manufactured by: Krauss Maffei Berstorff Model: GE 150 K Screw Diameter: 6"/150 mm L/D Ratio: 6 Speed: Variable, up to 45 rpm Motor: 90 KW, 1500 RPM Transmission: Direct Drive, 3 steps reduction Gear Reduction Ratio: 33:1 Year 2009  ...

• more information